User's Manual

14
• ANALOG OUTPUT 1
• BRIGHTNESS
• DIMMER MODE
RX1/RX2 menu
•GP/CH
• BAND
•RF SQUELCH
•ENCRYPTION
• CODEC MODE
• You cannot execute LOAD if you have never executed
SAVE.
• If you execute LOAD while performing the following
operations after setting values were stored, proper
communication with the transmitter will not be possible.
In such cases, perform pairing or encrypted transmission
settings again.
– Pairing the unit or establishing encrypted transmission
with a different transmitter.
– Pairing the transmitter that was paired with the unit
with a different receiver.
– Establishing encrypted transmission between the
transmitter and a different receiver.
Resetting parameters to their factory
settings
(FACTORY PRESET)
All parameter settings can be returned to their factory
settings.
Holding down the SET button until a message appears
asking for confirmation. Press the + or – button repeatedly
to select YES, and then press the SET button to enter. The
receiver parameters are reset to their factory settings.
Displaying the software version
(VERSION)
The version of the receiver software can be displayed.
RX (tuner) 1/2 Menu
For details on menu operation, see “Basic menu
operations” on page 12.
Use this menu to set the digital wireless receiver functions
(the main functions of this receiver).
The following shows the US model display.
* The antenna currently selected by the diversity function is indicated by “a”
or “b”.
Group/channel selection (GP/CH)
See “Carrier Frequencies and Channel Steps” on page 26
for factory settings.
For details, see“Selecting the frequency band / group /
channel” on page 7.
Frequency band selection (BAND)
See “Carrier Frequencies and Channel Steps” on page 26
for factory settings.
For details on the groups and channels included in each
frequency band, refer to “Sony Digital Wireless
Microphone System Frequency Lists” on the supplied
CD-ROM.
Active channel scanning function
(ACT CH SCAN)
The active channel scan function operates.
For details, see “Using the active channel scan function”
on page 9.
Clear channel scan function
(CLR CH SCAN)
The clear channel scan function operates.
For details, see “Using the clear channel scan function”
on page 9.
Notes
Menu name
Function name
Item to be set
*