Camcorder User Manual
Table Of Contents
- Table of Contents
- Chapter 1 Overview
- Chapter 2 Locations and Functions of Parts and Controls
- Chapter 3 Recording and Playback
- 3-1 About Cassette
- 3-2 Recording
- 3-2-1 Basic Procedures
- 3-2-2 Continuous Recording
- 3-2-3 Recording Essence Marks
- 3-2-4 Starting a Shoot with a Few Seconds of Pre-Stored Picture Data (Picture Cache Function: with CBK- MB01)
- 3-2-5 Shooting Picture at Intervals (Interval Rec Function: with CBK- MB01)
- 3-2-6 Continuous Recording on Previous Cut
- 3-2-7 Searching for the Last Recorded Portion and Turning in Recording Pause Mode (End Search Function)
- 3-3 Checking Recording and Playback
- 3-4 Freezing a Picture During Playback
- 3-5 Setting the Stand-by off Timer During Rec- Pause
- Chapter 4 Adjustments and Settings for Recording
- Chapter 5 Menu Displays and Detailed Settings
- 5-1 Menu Organization and Operation
- 5-2 Status Display on the Viewfinder Screen
- 5-2-1 Layout of the Status Display on the Viewfinder Screen
- 5-2-2 Selecting the Display Items
- 5-2-3 Display Modes and Setting Change Confirmation/Adjustment Progress Messages
- 5-2-4 Setting the Marker Display
- 5-2-5 Setting the Viewfinder
- 5-2-6 Recording Shot Data Superimposed on the Color Bars
- 5-2-7 Setting the Shot ID
- 5-2-8 Displaying the Status Confirmation Windows
- 5-2-9 Confirming the Image of the Return Video Signal in the Viewfinder
- 5-3 Adjustments and Settings from Menus
- 5-3-1 Setting Gain Values for the GAIN Selector Positions
- 5-3-2 Selecting the Output Signals
- 5-3-3 Setting the Color Temperature Manually
- 5-3-4 Specifying an Offset for the Auto White Balance Setting
- 5-3-5 Assigning Functions to Assignable Switches
- 5-3-6 Setting the Date/Time of the Internal Clock
- 5-3-7 Selecting the Lens File
- 5-3-8 Selecting the Aspect Ratio
- 5-3-9 Setting the CCD Scan Mode
- 5-3-10 Using UMID Data
- 5-4 Resetting USER Menu Settings to the Standard Settings
- Chapter 6 Saving and Loading User Setting Data
- Chapter 7 Setting Up the Camcorder
- 7-1 Power Supply
- 7-2 Adjusting the Viewfinder
- 7-3 Mounting the Lens
- 7-4 Adjusting the Flange Focal Length
- 7-5 Audio Input System
- 7-6 Tripod Mounting
- 7-7 Attaching/Detaching the Shoulder Strap
- 7-8 Adjusting the Shoulder Pad Position
- 7-9 Putting on the Rain Cover (Not Supplied)
- 7-10 Connecting the Remote Control Unit
- Chapter 8 Maintenance
- Appendixes
2
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified
personnel only.
For the customers in USA
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician
for help.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your authority to
operate this equipment.
The shielded interface cable recommended in this manual
must be used with this equipment in order to comply with the
limits for a digital device pursuant to Subpart B of Part 15 of
FCC Rules.
For the customers in the USA and Canada
• RECYCLING LITHIUM-ION BATTERIES
For the customers in Europe
This product with the CE marking complies with the EMC
Directive (89/336/EEC) issued by the Commission of the
European Community.
Compliance with these directives implies conformity to the
following European standards:
• EN55103-1: Electromagnetic Interference (Emission)
• EN55103-2: Electromagnetic Susceptibility (Immunity)
This product is intended for use in the following
Electromagnetic Environment(s):
E1 (residential), E2 (commercial and light industrial), E3
(urban outdoors) and E4 (controlled EMC environment, ex. TV
studio).
Voor de Klanten in Nederland
Gooi de batterij niet weg maar lever deze in als
klein chemisch afval (KCA).
For the customers in Taiwan only
WARNING
Lithium-Ion batteries are recyclable.
You can help preserve our environment
by returning your used rechargeable
batteries to the collection and recycling
location nearest you.
For more information regarding recycling of rechargeable
batteries, call toll free 1-800-822-8837, or visit
http://www.rbrc.org/
Caution: Do not handle damaged or leaking lithium-ion
batteries.