4-466-918-91(1) CD/DVD Player Reference Guide DVP-SR760H © 2012 Sony Corporation
Precautions WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. The mains lead must be changed only at a qualified service shop. Batteries or batteries installed apparatus shall not be exposed to excessive heat such as sunshine, fire or the like. This appliance is classified as a CLASS 1 LASER product.
AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE HTTP://WWW.MPEGLA.COM About this manual “DVD” may be used as a general term for commercial DVDs, DVD+RWs/DVD+Rs/DVD+R DLs (+VR mode) and DVD-RWs/ DVD-Rs/DVD-R DLs (VR mode, video mode).
TIME/TEXT Playback Control Menu display Checks the elapsed time and the remaining playback time. Input the time code for picture and music search (DVD and Xvid video files only). Use the Control Menu to select a function and to view related information. Selects either “USB” or “DISC” to be played. Press DISPLAY. DISC/USB TOP MENU/MENU To change the Control Menu display, press DISPLAY again. (DVD VIDEO only) TOP MENU: Displays the top menu. MENU: Displays the menu.
Parental Control (limited playback) You can set a playback limitation level. 1 Select “PLAYER t,” then press ENTER. Enter or re-enter your 4-digit password, then press ENTER. 2 Press X/x to select “STANDARD,” then press ENTER. Press X/x to select an area, then press ENTER. When you select “OTHERS t,” select and enter a standard code. See “PARENTAL CONTROL AREA CODE LIST” at the end of this manual. 3 Press X/x to select “LEVEL,” then press ENTER. Press X/x to select the level, then press ENTER.
INTERVAL* Specifies the duration for which the slides are displayed on the screen. EFFECT* Selects the effects to be used for changing slides during a slide show. MODE 1: The images randomly cycle through the effects. MODE 2: The image sweeps in from top left to bottom right. MODE 3: The image sweeps in from top to bottom. MODE 4: The image sweeps in from left to right. MODE 5: The image stretches out from the centre of the screen. OFF: Turns off this function. MEDIA Selects the media type you want to play.
Connecting a USB device You can connect a USB device to the USB jack of the player to play video, photo, or music files. About supported USB devices • This player supports USB Mass Storage Class only. • This player supports FAT formatted USB devices only (except exFAT). • Some USB devices may not work with this player. CUSTOM Menu You can adjust various settings. Press DISPLAY when the player is in stop mode, select (SETUP), and then select “CUSTOM.” The CUSTOM menu appears.
BACKGROUND: Selects the background colour or picture on the TV screen. If you set “JACKET PICTURE,” even though the disc does not contain a jacket picture, the “GRAPHICS” picture appears. MODE (PROGRESSIVE): If you select “AUTO,” the player detects the format (filmbased or video-based), and converts to the appropriate version. 4:3 OUTPUT: This setting is effective only when you set “TV TYPE” to “16:9.” Select “FULL” when you can change the aspect ratio on your TV.
AUDIO (HDMI): Selects the type of audio signal output from the HDMI OUT jack. Set to “PCM” if you connect the player to a TV that is not compatible with DOLBY DIGITAL/DTS/ MPEG signals. *1 When you select “OTHERS t,” select and enter a language code. See “LANGUAGE CODE LIST” at the end of this manual. 2 This function affects the output from the * following jacks: – LINE OUT L/R (AUDIO) jacks. – DIGITAL OUT (COAXIAL)/HDMI OUT jack only when “DOLBY DIGITAL” is set to “D-PCM.
c The player cannot play a recorded disc that is not correctly finalized. The player does not operate properly. c When static electricity, etc., causes the player to operate abnormally, unplug the player. “C:13:**” appears on the screen. c Clean the disc with a cleaning cloth or check its format. There is no picture/sound when connected to the HDMI OUT jack. c Change the “HDMI RESOLUTION” setting in “HDMI SETUP.” The problem may be solved.
some playback features may not be available. Also, refer to the operating instructions supplied with the DVDs or VIDEO CDs. Specifications Note on discs Laser: Semiconductor laser This unit is designed to play back discs that conform to the Compact Disc (CD) standard. DualDiscs and some music discs encoded with copyright protection technologies do not conform to the Compact Disc (CD) standard. Therefore, these discs may not be compatible with this unit.
LANGUAGE CODE LIST 1 page 7 Code Language Code Language Code Language Code Language 1027 1028 1032 1039 1044 1045 1051 1052 1053 1057 1059 1060 1061 1066 1183 1186 1194 1196 1203 1209 1217 1226 1229 1233 1235 1239 1245 1248 1253 1254 1257 1261 1269 1283 1287 1297 1298 1299 1300 1301 1305 1307 1311 1313 1326 1327 1332 1334 1347 1349 1350 1352 1353 1356 1357 1358 1363 1365 1369 1376 1379 1393 1403 1408 1417 1428 1435 1507 1508 1509 1511 1512 1513 1514 1515 1516 1517 1521 1525 1527 1528 1529 1531 1532 1
4-466-918-91(1) Printed in China
