3-867-036-12(1) CD/DVD Player Operating Instructions 1 2 3 4 5 6 7 8 9 0 DVP-S320 1999 by Sony Corporation
WARNING Welcome! To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Mains cord must only be changed at qualified service shop. CAUTION The use of optical instruments with this product will increase eye hazard. As the laser beam used in this CD/DVD player is harmful to eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only.
TABLE OF CONTENTS About This Manual 4 This Player Can Play the Following Discs 4 Precautions 6 Notes on Discs 6 Getting Started 7 Unpacking 7 TV Hookups 8 Receiver (Amplifier) Hookups 10 5.
About This Manual Conventions Icon • Instructions in this manual describe the controls on the player. You can also use the controls on the remote if they have the same or similar names as those on the player. • The icons on the right are used in this manual: Meaning Indicates that you can use only the remote to do the task. Z Indicates tips and hints for making the task easier. z Indicates the functions for DVD VIDEOs. Indicates the functions for VIDEO CDs. Indicates the functions for Audio CDs.
Terms for discs Discs that the player cannot play • Title The longest sections of a picture or a music piece on a DVD; a movie, etc., for a picture piece on a video software; or an album, etc., for a music piece on an audio software. Each title is assigned a title number enabling you to locate the title you want. The player cannot play discs other than the ones listed in the table on page 4. CD-R, CD-ROMs including PHOTO CDs, data sections in CD-EXTRAs, DVD-ROMs etc., cannot be played.
Precautions On safety • Caution – The use of optical instruments with this product will increase eye hazard. • Should any solid object or liquid fall into the cabinet, unplug the player and have it checked by qualified personnel before operating it any further. On power sources • The player is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the player itself has been turned off.
Getting Started Check that you have the following items: • Audio/video connecting cord (1) • S video cord (1) • Remote commander (remote) RMT-D109E (1) • Size R6 (AA) batteries (2) Getting Started This section describes how to hook up the CD/DVD player to a TV (with audio/video input jacks) and/or an AV receiver (amplifier). You cannot connect this player to a TV which does not have a video input connector. Be sure to turn off the power of each component before making the connections.
TV Hookups Getting Started This connection is for listening to the sound through TV speakers (2ch – L,R). Refer to the instructions supplied with the component to be connected. Required cords Audio/video connecting cord (supplied) (1) Yellow Yellow White (L) White (L) Red (R) Red (R) S video cord (supplied) (1) When connecting the cords, be sure to match the color-coded cord to the appropriate jacks on the components: Yellow (video) to Yellow, Red (right) to Red and White (left) to White.
Notes VCR CD/DVD player TV Connect directly • Depending on the TV or receiver (amplifier), sound distortion may occur because the audio output level is high. In this case, set “AUDIO ATT” in “AUDIO SETUP” to “ON” in the setup display. For details, see page 47. Setups for the player Some setups are necessary for the player depending on the TV or other components to be connected. Use the setup display to change the various settings. For details on using the setup display, see page 39.
Receiver (Amplifier) Hookups Getting Started This connection is for listening to the sound through speakers connected to a receiver. Refer to the instructions supplied with the component to be connected. Required cords Audio connecting cord (not supplied) (1) White (L) White (L) Red (R) Red (R) S video cord (supplied) (1) When connecting the cords, be sure to match the color-coded cord to the appropriate jacks on the components: Red (right) to Red and White (left) to White.
Connect the component via the DIGITAL OUT OPTICAL or COAXIAL connector using an optical or coaxial digital connecting cord (not supplied). When you play a DVD, set “DIGITAL OUT” in “AUDIO SETUP” to “ON” and then set “DOLBY DIGITAL” to “D-PCM,” “MPEG” to “PCM” and “DTS” to “OFF” in the setup display. (page 48) p When using an optical digital connecting cord Optical digital connecting cord (not supplied) Take off the cap and plug in the optical digital connecting cord.
5.1 Channel Surround Hookups Getting Started With DVDs which contain DTS, Dolby* Digital or MPEG AUDIO sound, you can enjoy the surround sound while producing the effect of being in a movie theater or a concert hall, using a digital component with a built-in DTS, Dolby Digital or MPEG decoder (not supplied). The player outputs the surround sound signals from the DIGITAL OUT OPTICAL and COAXIAL connectors. Note When a DVD has a sound track with 7.
TV Getting Started S VIDEO IN S video cord CD/DVD player LINE OUT R–AUDIO 1–L VIDEO 1 DIGITAL OUT S VIDEO OUT 1 2 OPTICAL COAXIAL PCM/DTS/MPEG/ DOLBY DIGITAL (AC-3) R–AUDIO 2–L VIDEO 2 Coaxial digital connecting cord* (not supplied) Audio connecting cord (not supplied) Optical digital connecting cord* (not supplied) * You do not need to connect both of these cords. DIGITAL TV/LD DVD VIDEO 2 VIDEO 1 MONITOR S-LINK AC OUTLET CTRL A1 TV/LD IN AC-3 RF DVD IN PRE OUT 5.
Selecting the Language for On-Screen Display Getting Started You can select the language for the setup display, the Control Menu display or the messages displayed on the screen. Default setting is “ENGLISH.” 1 2 3 4 5 6 7 8 9 3 Select “CHINESE1” or “CHINESE2” using >/ ., then press ENTER. SET UP 0 ENTER ?/>/.// To cancel using the setup display on the way Press SET UP. Note 1 Press SET UP and select “LANGUAGE SETUP” using >/ ., and then press ENTER.
Playing Discs This chapter describes how to play a DVD/CD/VIDEO CD. Playing Discs Depending on the DVD or VIDEO CD, some operations may be different or restricted. Refer to the instructions supplied with your disc. 1/u (POWER) § · Playing Discs 1 Make settings on your TV. Turn on the TV and select the video input so that you can view the pictures from this player.
Playing Discs z You can turn on the player using the remote To Operation Press 1/u (POWER) when the indicator above the 1/u (POWER) button on the front panel is lit in red. Stop Press p. Pause Press P. Resume play after pause Press P or ·. Go to the next chapter, track or scene in continuous play mode Press +. Go back to the preceding chapter, track or scene in continuous play mode Press =. Stop play and remove the disc Press 6.
Searching for a particular point on a disc Z You can locate a particular point on a disc by monitoring the picture, playing back slowly or playing frame by frame. / 3/# You can use this function only for DVDs or VIDEO CDs. Press or while playing a disc. When you find the point, press · to return to the normal speed. Each time you press the or button during Slowmotion play, the playback speed changes. Two speeds are available.
Resuming Playback from the Point Where You Stopped the Disc (Resume Play) The player stores the point where you stopped the disc and if “RESUME” appears on the front panel display. You can resume playback from that point. As long as you do not open the disc tray, Resume Play is available even if you turn the power off. Playing Discs · p · p 1 While playing a disc, press p to stop playback. “RESUME” appears in the front panel display and “When playing next time, disc restarts from point you stopped.
Using the Menu for Each DVD Using the title menu Using the DVD menu A DVD is divided into long sections of a picture or a music piece called “titles.” When you play a DVD which contains several titles, you can select the title you want using the title menu. TITLE TITLE 1 Press DVD MENU. The DVD menu appears on the TV screen. The contents of the menu vary from disc to disc. 2 Press ?/>/.// to select the item you want to change. Depending on the disc, you can use the number buttons to select the item.
Playing VIDEO CDs with PBC Functions (PBC Playback) Playing Discs When playing VIDEO CDs with PBC functions (Ver. 2.0 discs), you can enjoy simple interactive operations, operations with search functions, etc. PBC Playback allows you to play VIDEO CDs interactively, following the menu screen on the TV screen. On this player, you can use the number buttons, ENTER, =, +, >/. and ˆ(RETURN) during PBC Playback. =/+ >/.
Using the Front Panel Display Z You can check information about the disc, such as the total number of the titles or the tracks or remaining time, using the front panel display.
Using the Front Panel Display z When playing VIDEO CDs with PBC functions Playing Discs The current scene number is displayed instead of the current track number and the current index number. In this case, the front panel display does not change when you press TIME/ TEXT. If the TEXT is recorded on the disc, the front panel display changes to Text display when you press TIME/TEXT (see page 28). Checking the remaining time Press TIME/TEXT.
Using Various Functions with the Control Menu Using the Control Menu Display Z Using the Control Menu display, you can select the start point, play in a order you like, change the angles, etc. The items are different depending on the kind of disc. For details on each Control Menu display item, see pages 26 to 38. ENTER DISPLAY 1 ?/ > / . / / Press DISPLAY to show the Control Menu display on the TV screen. 12(27) 18(34) C 01:32:55 To select, press PLAY DVD , then ENTER .
Using the Control Menu Display 2 Select the item you want using >/., then press / or ENTER. 12(27) 18(34) C 01:32:55 PLAY DVD Items Using Various Functions with the Control Menu To select, press , then ENTER 12(27) 18(34) C 01:32:55 To display other items Each time you press DISPLAY, the Control Menu display changes as follows: . /Control Menu display . ADVANCED display (see page 37) .
Control Menu Item List TITLE (DVD only) (page 26) CHAPTER (DVD only) (page 26) TRACK (VIDEO CD/CD only) (page 26) INDEX (VIDEO CD/CD only) (page 26) SCENE (VIDEO CD during PBC playback only) REPEAT (page 35) You can play all the titles/tracks on a disc or a single title/ chapter/track repeatedly. A-B REPEAT (page 36) You can play a specific portion of a title, chapter, or track repeatedly.
Searching for the Title/Chapter/Track/Index/Scene Z You can search by selecting the title/chapter/track/ index/scene. Select “TITLE,” “ CHAPTER,” “ TRACK”, “INDEX” or “SCENE” after pressing DISPLAY. When you play back a DVD, “TITLE” and “ CHAPTER” are displayed. When you play back a VIDEO CD/CD, “TRACK” and “INDEX” are displayed. When you play back a VIDEO CD with PBC functions, “SCENE” is displayed. 2 Press / or ENTER.
Checking the Playing Time and Remaining Time Z Selecting a Start Point Using the Time Code Z You can check the playing time and remaining time of the current title /chapter/track and the total remaining time of the disc. Press DISPLAY. Then press TIME/TEXT on the remote to change the time information. You can also check the DVD TEXT or CD TEXT. See page 28. You can search by inputting the time code. Select “TIME/TEXT” after pressing DISPLAY.
Selecting a Start Point Using the Time Code 3 Input the time code using the number buttons, then press ENTER. The player starts searching. To cancel the number, press CLEAR before pressing ENTER. To cancel inputting Press ˆRETURN. z You can display “TIME/TEXT” display using the remote Checking the Information of the Disc Z You can check the DVD TEXT or CD TEXT of the disc on the TV screen and the front panel display. DVD TEXT and CD TEXT are information recorded on the disc which you cannot change.
Changing the Sounds Z AUDIO 12(27) PLAY 18(34) DVD C 01:32:55 1: ENGLISH 1: ENGLISH 2: FRENCH PROGRAM FORMAT 3: SPANISH DOLBY DIGITAL 3/2.1 L C R Displaying the audio information of the disc When you select “AUDIO,” the playing channels are displayed on the screen. In Dolby Digital format, the signals from monaural to 5.1 channels can be recorded on a DVD. Depending on the DVD the number of the recorded channels may be different.
Changing the Sounds The display examples are as follows: •PCM (stereo) •MPEG 1: ENGLISH 1: ENGLISH PROGRAM FORMAT MPEG 2/2 PROGRAM FORMAT PCM 48kHz 24bits L C R LFE To select, press To select, press , then ENTER . Using Various Functions with the Control Menu z You can find Dolby Surround-encoded software by looking at the packaging •Dolby Surround Use discs with the logo. In order to enjoy Dolby Digital playback you must use discs bearing this logo.
Changing the Angles Z With DVDs on which subtitles are recorded, you can turn the subtitles on and off whenever you want while playing the DVD. With DVDs on which multilingual subtitles are recorded, you can change the subtitle language whenever you want while playing the DVD, and turn it on or off whenever you want. For example, you can select the language you want to master and turn the subtitles on for better understanding. Select “SUBTITLE” after pressing DISPLAY.
Changing the Angles 3 Select the number of the angles using the number buttons or >/., then press ENTER. The angle is changed to the selected angle. 12(27) 18(34) C 01:32:55 PLAY DVD 5(9) Using Various Functions with the Control Menu To select, press , then ENTER Creating Your Own Program (Program Play) Z You can play the contents of the disc in the order you want by arranging the order of the titles, chapters or tracks on the disc and create your own program.
2 pWhen playing a VIDEO CD or CD Select the track you want to program. Press /. “01” is highlighted. It is ready to set the first title or track for program. Title PROGRAM T –– 01 02 03 04 05 ALL CLEAR 1. TRACK 0 2 2. TRACK 3. TRACK – – 4. TRACK – – 5. TRACK – – 6. TRACK – – 7. TRACK – – ALL 01 02 03 04 05 06 To set, press , then ENTER . Pressing PLAY starts program play. 3 pWhen playing a DVD When both titles and chapters are recorded on the disc, select the title, then the chapter. ALL CLEAR 1.
Creating Your Own Program (Program Play) To cancel the programmed order To cancel all the titles, chapters or tracks in the programmed order, select “ALL CLEAR” in Step 2. To cancel the selected program, select the program using >/. in Step 2 then press CLEAR, or select “- -” in Step 3 then press ENTER. z The program remains even after the Program Play ends Playing in Random Order (Shuffle Play) Z You can have the player “shuffle” titles or tracks and play them in a random order.
z You can set Shuffle Play during stop After selecting the item of “SHUFFLE”, press ·. The player starts Shuffle Play. z You can display the “SHUFFLE” display using the remote Press SHUFFLE on the remote. Notes You can play all the titles/tracks on a disc or a single title/ chapter/track. In Shuffle or Program Play mode, the player repeats the titles or tracks in the shuffled or programmed order. You cannot do Repeat Play during PBC playback of VIDEO CDs (page 20).
Repeating a Specific Portion (A˜B Repeat) Z Setting a portion for A˜B repeat Using Various Functions with the Control Menu You can play a specific portion of a title, chapter, track repeatedly. This is useful when you want to memorize lyrics. During PBC Playback of VIDEO CDs (page 20), this function is available only while playing moving pictures. You may not be able to do A˜B Repeat Play depending on the DVD. Select “A-B REPEAT” after pressing DISPLAY.
Checking the Play Information Z 3 When you reach the ending point (point B), press ENTER again. The setting points are displayed and the player starts repeating this specific portion. “A-B REPEAT” appears on the front panel display during A˜B repeat play.
Checking the Play Information LAYER Displays of each item BIT RATE Appears when the DVD has dual layers BIT RATE Using Various Functions with the Control Menu 0 384 kbps Mbps 10 5 Audio Video When you play MPEG AUDIO sound tracks BIT RATE kbps 1000 Mbps 10 0 0 5 Audio Video Bit rate refers to the amount of video/audio data per second in a disc. The higher the bit rate is, the larger the amount of data. When the bit rate level is high, there is a large amount of data.
Settings and Adjustments This chapter describes how to set and how to adjust using the on-screen SET UP menu. Most settings and adjustments are required to be set when you first use the player. This chapter also describes how to set the remote for controlling the TV or the AV receiver (amplifier). Using the Setup Display Z Using the setup display, you can do the initial setup, adjusting the picture and sound quality, setting the various outputs, etc.
Using the Setup Display 2 Select the main item you want using >/., and then press ENTER. The selected main item is highlighted. Main item LANGUAGE SETUP OSD: DVD MENU: AUDIO: SUBTITLE: To set, press To quit, press Settings and Adjustments 3 ENTER . ENTER To set, press To quit, press 40 ENTER . . , then SETUP . . To set, press To quit, press 4:3 PAN SCAN ON JACKET PICTURE , then SETUP ENTER . . To cancel using the setup display on the way Press SET UP on the remote.
Setup Display Item List Default settings are underlined.
Setting the Language for Display and Sound (LANGUAGE SETUP) Z Select “LANGUAGE SETUP” after pressing SET UP. “LANGUAGE SETUP” allows you to set various languages for on-screen display or sound. Default settings are underlined. Note When you select a language that is not recorded on the DVD, one of the recorded languages is automatically selected except for the “OSD”.
Settings for Display (SCREEN SETUP) Z Select “SCREEN SETUP” after pressing SET UP. “SCREEN SETUP” allows you to set the display according to the playback conditions. Default settings are underlined. SCREEN SETUP TV TYPE: SCREEN SAVER: BACKGROUND: To set, press To quit, press 16:9 ON JACKET PICTURE , then SETUP ENTER . . pBACKGROUND Selects the background color or picture of the TV screen in stop mode or while playing a CD.
Custom Settings (CUSTOM SETUP) Z Select “CUSTOM SETUP” after pressing SET UP. “CUSTOM SETUP” allows you to set the playback conditions. Default settings are underlined. CUSTOM SETUP COLOR SYSTEM: AUTO PLAY: DIMMER: PAUSE MODE: PARENTAL CONTROL To set, press To quit, press , then SETUP AUTO OFF BRIGHT AUTO ENTER pPAUSE MODE (DVD only) Selects the picture in pause mode. • AUTO: A picture including subjects that move dynamically is output with no jitter. Normally select this position.
pWhen you have not entered a password yet 3 The display for entering a password appears. CUSTOM SETUP PARENTAL CONTROL To confirm your password, enter it using the number buttons, then press ENTER. The display for setting the playback limitation level and changing the password appears. CUSTOM SETUP Entry password. Enter a number in 4 figures, then press ENTER . PARENTAL CONTROL LEVEL: STANDARD: CHANGE PASSWORD OFF USA To return, press RETURN . To cancel, press SETUP .
Custom Settings (CUSTOM SETUP) 6 Select “LEVEL” using >/., then press /. CUSTOM SETUP PARENTAL CONTROL LEVEL: STANDARD: CHANGE PASSWORD To set, press To cancel, press 7 , then . ENTER OFF OFF 8: 7: 6: 5: NC17 R . Settings and Adjustments CUSTOM SETUP PARENTAL CONTROL LEVEL: STANDARD: CHANGE PASSWORD , then . ENTER 4: PG13 USA . SETUP The lower the value is, the more strict the limitation. To return to the normal screen Press SET UP.
Settings for Sound (AUDIO SETUP) Select “AUDIO SETUP” after pressing SET UP. “AUDIO SETUP” allows you to set the sound according to the playback conditions. Default settings are underlined. AUDIO SETUP OFF AUDIO ATT: STANDARD AUDIO DRC: OFF TRACK SELECTION: DOWNMIX: DOLBY SURROUND DIGITAL OUT: ON D-PCM DOLBY DIGITAL: MPEG: PCM DTS: OFF To set, press To quit, press , then SETUP ENTER . . Note The setting does not affect the output from the DIGITAL OUT OPTICAL and COAXIAL connectors.
Settings for Sound (AUDIO SETUP) pDIGITAL OUT Selects output signals via the DIGITAL OUT OPTICAL and COAXIAL connectors. • ON: Normally select this position. When you select “ON,” set “DOLBY DIGITAL,” “MPEG” and “DTS.” For details on setting them, see “Setting for the Signal to the Digital Output.” • OFF: when the player does not output the sound signals via DIGITAL OUT OPTICAL and COAXIAL connectors, if you select this position, the influence of the digital circuit upon the analog one is minimum.
pMPEG Selects output MPEG AUDIO signals via the DIGITAL OUT OPTICAL and COAXIAL connectors. You cannot select this item when you set “DIGITAL OUT” to “OFF.” • PCM: when the player is connected to an audio component lacking a built-in MPEG decoder. If you play MPEG AUDIO sound tracks, the player outputs stereo signals taken from MPEG AUDIO signals via the DIGITAL OUT OPTICAL and COAXIAL connectors. • MPEG: when the player is connected to an audio component having a built-in MPEG decoder.
Controlling the TV or the AV Receiver (Amplifier) with the Supplied Remote Z If you adjust the remote signal, you can control your TV with the supplied remote. Default setting is to control Sony TVs with the g mark. When you connect the player to a Sony AV receiver (amplifier), you can also set the input of the receiver (amplifier) to this player with the supplied remote.
When you set the TV/DVD switch to TV, you can control your TV using the keys below. 1/u (POWER) TV/DVD switch 1 2 3 4 5 6 7 8 9 0 WIDE MODE ENTER TV/VIDEO TV CH VOL ENTER You can 1/u (POWER) Turn the TV on or off TV/VIDEO Select the input source for the TV VOL Adjust the volume of the TV TV CH Change the channel of the TV WIDE MODE Switch the wide picture on or off Note Depending on the TV, you may not be able to control your TV or to use some of the buttons above.
Additional Information Troubleshooting If you experience any of the following difficulties while using the player, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. Power The power is not turned on. / If the indicator above the 1/u (POWER) button is not lit, check that the AC power cord is connected securely. Picture There is no picture. / Check that the player is connected securely. / The video connecting cord is damaged.
Sound Sound noise is heard. / Clean the disc. / When you play the DTS sound tracks on a CD, sound noise will come out from the LINE OUT connectors. (page 49) Sound distortion occurs. / In the setup display, set “AUDIO ATT” in ”AUDIO SETUP” to “ON.” The sound loses stereo effect when you play a VIDEO CD or a CD. / Set “AUDIO” to “STEREO” in the Control Menu display. (page 29) / Make sure you connect the player appropriately. (page 8, 10, 12) The sound comes from the center speaker only.
Troubleshooting The player starts playing the DVD automatically. / The DVD features the auto playback function. Playback stops automatically. / Depending on the disc, the auto pause signal is recorded. While playing such a disc, the player stops playback at the signal. Stopping playback, Search, Slow-motion Play, Repeat Play, Shuffle Play or Program Play, etc., cannot be done. / Depending on the disc, you may not do some of the operations above.
Self-diagnosis function When the self-diagnosis function works to prevent the player from malfunctioning, a five-character service number (combination of a letter and digits) flashes on the front panel display. In this case, check the following table. First three characters Cause and/or Corrective Action C13 •The disc is dirty. /Clean the disc with a cleaning cloth. (page 6) C31 •The disc is not inserted correctly. /Open the disc tray and insert the disc correctly.
Specifications CD/DVD player General Laser Semiconductor laser Signal format system NTSC/PAL (See page 9 to switch.) Audio characteristics Additional Information Frequency response DVD (PCM 96 kHz): 2 Hz to 44 kHz (±1 dB)* DVD (PCM 48 kHz): 2 Hz to 22 kHz (±0.5 dB) CD: 2 Hz to 20 kHz (±0.5 dB) Signal-to-noise ratio More than 110 dB (LINE OUT (AUDIO 1, 2) connectors only) Harmonic distortion Less than 0.
Glossary Bit rate (page 37) Value indicating the amount of video data compressed in a DVD per second. The unit is Mbps (Mega bit per second). 1 Mbps indicates that the data per second is 1,000,000 bits. The higher the bit rate is, the larger the amount of data. However, this does not always mean that you can get higher quality pictures. Chapter (page 5) Sections of a picture or a music piece on a DVD that are smaller than titles. A title is composed of several chapters.
Glossary VIDEO CD (page 4) A compact disc that contains moving pictures. The picture data uses the MPEG 1 format, one of the worldwide standards of digital compression technology. The picture data is compressed to about 1/140 of its original size. Consequently, a 12 cm VIDEO CD can contain up to 74 minutes of moving pictures. VIDEO CDs also contain compact audio data. Sounds outside the range of human hearing are compressed while the sounds we can hear are not compressed.
Language Code List For details, see page 31, 42. The language spellings conform to the ISO 639: 1988 (E/F) standard.
Index to Parts and Controls Refer to the pages indicated in parentheses for details. Front Panel Additional Information 1 g (remote sensor) (7) Accepts the remote control signals. 2 1/u (POWER) button and indicator (15) Turns on and off the power of the player. 3 Disc tray (15) Place a disc on the tray. 4 §OPEN/CLOSE button (15) Opens or closes the disc tray. 5 =/+ PREV/NEXT buttons (16) Press to go to the next chapter or track, or to go back to the previous chapter or track. 6 ?/>/.
Rear Panel LINE OUT R–AUDIO 1–L VIDEO 1 DIGITAL OUT S VIDEO OUT 1 COMPONENT VIDEO OUT Y CB/B–Y CR/R–Y 2 OPTICAL COAXIAL PCM/DTS/ CONTROL S DOLBY DIGITAL (AC-3) IN R–AUDIO 2–L VIDEO 2 Additional Information 1 DIGITAL OUT (OPTICAL) connector (11, 12) Connects to an audio component using the optical digital connecting cord. 2 DIGITAL OUT (COAXIAL) connector (11, 12) Connects to an audio component using the coaxial digital connecting cord.
Index to Parts and Controls Remote 1 2 3 4 5 6 7 8 9 0 Additional Information 1 TV/DVD switch (57) Selects to control the player or the TV with the remote. 2 6OPEN/CLOSE button (15) Opens or closes the disc tray. 3 Number buttons Selects the items or settings. 4 CLEAR button (33, 34, 35, 37) Press to return to the continuous play etc. 5 REPEAT button (35) Displays the “REPEAT” display on the TV screen. 6 SHUFFLE button (34) Displays the “SHUFFLE” display on the TV screen.
Index Numerics F, G 4:3 LETTER BOX 43 4:3 PAN SCAN 43 16:9 43 A Fast Forward 17 Fast Reverse 17 Front panel display S S video output 8, 10 Scene 5 SCENE 26 SCREEN SAVER 43 SCREEN SETUP 43 Searching. See Locating.
Sony Corporation Printed in Malaysia
