3-080-598-12(1) CD/DVD Player Operating Instructions DVP-NS330 DVP-NS333 DVP-NS430 DVP-NS433 © 2003 Sony Corporation
WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. The mains lead must only be changed at a qualified service shop. This appliance is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT MARKING is located on the rear exterior. CAUTION The use of optical instruments with this product will increase eye hazard.
On adjusting volume Precautions On safety • Caution – The use of optical instruments with this product will increase eye hazard. • Should any solid object or liquid fall into the cabinet, unplug the player and have it checked by qualified personnel before operating it any further. On power sources • The player is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the player itself has been turned off.
Table of Contents WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Welcome! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Enjoying Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Changing the Angles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Displaying the Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Adjusting the Picture Quality (BNR). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Adjusting the Playback Picture (CUSTOM PICTURE MODE). . . . . . . . . . . .
About this Manual This Player Can Play the Following Discs Check your model name The instructions in this manual are for 4 models: DVP-NS330, DVP-NS333, DVP-NS430, and DVP-NS433. Check your model name by looking at the front panel of the player. • Instructions in this manual describe the controls on the remote. You can also use the controls on the player if they have the same or similar names as those on the remote. • “DVD” may be used as a general term for DVD VIDEOs, DVD-RWs/DVD-Rs, and DVD+RWs/DVD+Rs.
• • • • – MP3 format that conforms to ISO9660* Level 1/Level 2, or its extended format, Joliet Data part of CD-Extras DVD-ROMs DVD Audio discs HD layer on Super Audio CDs * A logical format of files and folders on CDROMs, defined by ISO (International Standard Organization). Also, the player cannot play the following discs: • A DVD VIDEO with a different region code. • A disc that has a non-standard shape (e.g., card, heart). • A disc with paper or stickers on it.
Index to Parts and Controls For more information, refer to the pages indicated in parentheses. Front panel DVP-NS330/NS333 A B C D E [/1 (on/standby) button (26) Disc tray (26) Front panel display (9) (remote sensor) (15) A (open/close) button (26) F G H I J Playback Dial (39) X (pause) button (27) x (stop) button (27) SURROUND button (49) PICTURE MODE button (53) G H I J K X (pause) button (27) x (stop) button (27) .
Front panel display When playing back a DVD VIDEO/DVD-RW Playing status Lights up when you can change the angle (51) Disc type Lights up during Repeat Play (36) Current audio signal (47) Current title/chapter or playing time (44) When playing back a VIDEO CD with Playback Control (PBC) (31) Disc type Playing status Lights up during A-B Repeat Play (37) Current scene or playing time (44) When playing back a CD, DATA CD (MP3 audio), or VIDEO CD (without PBC) Playing status Disc type Lights up duri
Rear panel DVP-NS330/NS333 DIGITAL OUT LINE OUT L CENTER PCM/DTS/MPEG/ DOLBY DIGITAL R-AUDIO-L COAXIAL LINE (RGB) -TV VIDEO A DIGITAL OUT (COAXIAL) jack (20) (21) (22) B LINE OUT L/R (AUDIO) jacks (19) (20) (21) C LINE OUT (VIDEO) jack (16) D LINE (RGB) - TV jack (16) DVP-NS430/NS433 DIGITAL OUT LINE OUT L PCM/DTS/MPEG/ DOLBY DIGITAL COAXIAL OPTICAL R-AUDIO-L LINE (RGB) -TV VIDEO A DIGITAL OUT (COAXIAL) jack (20) (21) (22) B DIGITAL OUT (OPTICAL) jack (20) (21) (22) C LINE OUT L/R (AUD
Remote A TV [/1 (on/standby) button (59) B Z (open/close) button (26) C Number buttons (29) The number 5 button has a tactile dot.* D CLEAR button (34) E (subtitle) button (51) F (audio) button (47) G ./> (previous/next) buttons (27) H m/M (scan/slow) buttons (39) I X (pause) button (27) J H (play) button (26) The H button has a tactile dot.
Guide to the Control Menu Display (Magic Pad) Use the Control Menu to select a function and to view related information. Press DISPLAY repeatedly to turn on or change the Control Menu display as follows: , Control Menu display 1 m Control Menu display 2 (DVD/VIDEO CD only) m ADVANCED display (DVD only. See page 45.) m Control Menu display off z Hint You can skip the ADVANCED display by setting “OFF” under “ADVANCED” in the Control Menu (page 45).
List of control menu items Item Item Name, Function, Relevant Disc Type TITLE (page 40)/SCENE (page 40)/TRACK (page 40) Selects the title, scene, or track to be played. CHAPTER (page 40)/INDEX (page 40) Selects the chapter or index to be played. ALBUM (page 32) Selects the album to be played. TRACK (page 40) Selects the track to be played. INDEX (page 40) Selects the index to be played.
PROGRAM (page 34) Selects the title, chapter, or track to play in the order you want. SHUFFLE (page 35) Plays the title, chapter, or track in random order. REPEAT (page 36) Plays the entire disc (all titles/all tracks/all albums) repeatedly or one title/chapter/ track/album repeatedly. A-B REPEAT (page 37) Specifies the parts you want to play repeatedly. BNR (page 52) Adjusts the picture quality by reducing the “block noise” or mosaic like patterns that appear on your TV screen.
Hookups Hooking Up the Player Hookups Follow Steps 1 to 6 to hook up and adjust the settings of the player. Notes • • • • Plug cords securely to prevent unwanted noise. Refer to the instructions supplied with the components to be connected. You cannot connect this player to a TV that does not have a SCART (EURO AV) or video input jack. Be sure to disconnect the mains lead of each component before connecting.
Step 3: Connecting the Video Cords Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord. Select one of the patterns A through B, according to the input jack on your TV monitor, projector, or AV amplifier (receiver).
When connecting to a standard 4:3 screen TV Notes Hookups Depending on the disc, the image may not fit your TV screen. If you want to change the aspect ratio, please refer to page 62. • Do not connect the player to a VCR. If you pass the player signals via the VCR, you may not receive a clear image on the TV screen. If your TV only has one audio/video input jack, connect the player to this jack.
Step 4: Connecting the Audio Cords Refer to the chart below to select the connection that best suits your system. Be sure to also read the instructions for the components you wish to connect. Select a connection Select one of the following connections, A through Components to be connected .
A Connecting to your TV This connection will use your TV speakers for sound. If you use the SCART (EURO AV) cord in B of “Step 3: Connecting the Video Cords” (page 16), you do not have to connect audio cords to your TV.
B Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to an MD deck or DAT deck If the stereo amplifier (receiver) has audio input jacks L and R only, use B-1 . If the amplifier (receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use B-2 . In this case, you can also connect the player directly to the MD deck or DAT deck without using your stereo amplifier (receiver).
C Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro Logic) decoder and 3 to 6 speakers CD/DVD player DIGITAL OUT LINE OUT L PCM/DTS/MPEG/ DOLBY DIGITAL COAXIAL C-2 DIGITAL OUT OPTICAL R-AUDIO-L CENTER Hookups You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multichannel audio (Dolby Digital) discs. If your amplifier (receiver) has L and R audio input jacks only, use C-1 . If your amplifier (receiver) has a digital input jack, use C-2 .
D Connecting to an AV amplifier (receiver) with a digital input jack having a Dolby Digital, MPEG audio or DTS decoder and 6 speakers This connection will allow you to use the Dolby Digital, MPEG audio, or DTS decoder function of your AV amplifier (receiver).
Step 5: Connecting the Mains Lead Plug the player and TV mains lead (power cord) into a mains. Hookups Step 6: Quick Setup Follow the steps below to make the minimum number of basic adjustments for using the player. To skip an adjustment, press >. To return to the previous adjustment, press .. LANGUAGE SETUP OSD: MENU: AUDIO: SUBTITLE: ENGLISH ENGLISH FRANÇAIS DEUTSCH ITALIANO ESPAÑOL NEDERLANDS DANSK SVENSKA 5 Press X/x to select a language. ENTER 1 Turn on the TV. 2 Press [/1.
8 Press ENTER. B-1 The Setup Display for selecting the type of video signal output from the LINE (RGB)-TV jack appears. SCREEN SETUP TV TYPE: SCREEN SAVER: BACKGROUND: LINE: B-2 16:9 ON JACKET PICTURE VIDEO VIDEO S VIDEO RGB 9 Press X/x to select the type of signal you want to output from the LINE (RGB)-TV jack. Dolby Digital signal you wish to send to your amplifier (receiver). Choose the signal that matches the audio connection you selected on pages 20 to 22 ( B through D ).
D • ON (only if the amplifier (receiver) has a DTS decoder) (page 65) 15Press ENTER. Hookups Quick Setup is finished. All connections and setup operations are complete. If your AV amplifier (receiver) has an MPEG audio decoder, set “MPEG” to “MPEG” (page 65). Enjoying the surround sound effects To enjoy the surround sound effects of this player or your amplifier (receiver), set the following items as described below for the audio connection you selected on pages 20 to 22 ( B through D ).
4 Press A on the player, and place a disc on the disc tray. Playing Discs Playing Discs Depending on the DVD or VIDEO CD, some operations may be different or restricted. Refer to the operating instructions supplied with your disc. [/1 H/Playback Dial (DVP-NS330/ NS333 only) A With the playback side facing down 5 Press H. The disc tray closes, and the player starts playback (continuous play). Adjust the volume on the TV or the amplifier (receiver).
and may affect your ears or cause your speakers to be damaged. Notes on playing DTS sound tracks on a DVD VIDEO Additional operations Operation Replay the previous scene** Press (instant replay) during playback Briefly fast forward the current scene*** Press (instant search) during playback * For more details about the Playback Dial, see page 39.
To unlock the disc tray When the player is in standby mode, press O RETURN, ENTER, and then [/1 again. Note Even if you select “RESET” under “SETUP” in the Control Menu (page 61), the disc tray remains locked. Resuming Playback from the Point Where You Stopped the Disc (Resume Play/Multi-disc Resume) The player remembers the point where you stopped the disc.
• When playing a CD, the point where you stopped is cleared when the disc tray is opened or the mains lead is disconnected. • When playing a DATA CD, the point where you stopped is cleared when the player enters standby mode, the disc tray is opened, or the mains lead is disconnected. • This function may not work with some discs. • Resume Play does not work during Shuffle Play and Programme Play.
Selecting “ORIGINAL” or “PLAY LIST” on a DVDRW Disc Some DVD-RW discs in VR (Video Recording) mode have two types of titles for playback: originally recorded titles (ORIGINAL) and titles that can be created on recordable DVD players for editing (PLAY LIST). You can select the type of titles to be played. ENTER DISPLAY 1 Press DISPLAY in stop mode. The Control Menu appears. 2 Press X/x to select (ORIGINAL/PLAY LIST), then press ENTER. The options for “ORIGINAL/PLAY LIST” appear.
Playing VIDEO CDs With PBC Functions (PBC Playback) Notes • Depending on the VIDEO CD, “Press ENTER” in step 3 may appear as “Press SELECT” in the instructions supplied with the disc. In this case, press H. • The PBC functions of Super VCDs do not work with this player. Super VCDs are played in continuous play mode only. Number buttons Playing Discs PBC (Playback Control) allows you to play VIDEO CDs interactively by following the menu on the TV screen. z Hint To play without using PBC, press .
1( 30) Playing an MP3 Audio Track ROCK BEST HIT KARAOKE JAZZ R&B MY FAVORITE SONGS CLASSICAL SALSA OF CUBA BOSSANOVA You can play back DATA CDs (CD-ROMs/ CD-Rs/CD-RWs) recorded in MP3 (MPEG 1 Audio Layer 3) format. 2 Select an album using X/x and press ENTER. The list of tracks contained in the album appears. JAZZ 1(90) 0 0 0 0 0 0 0 ENTER RETURN MENU 1 Press Z and place a DATA CD on 3 1 2 3 4 5 6 7 SHE IS SPECIAL ALL YOU NEED IS ...
See the instructions of the CD-R/CD-RW device or recording software (not supplied) for details on the recording format. To play a Multi Session CD Notes • If you put the extension “.MP3” to data not in MP3 format, the player cannot recognize the data properly and will generate a loud noise which could damage your speaker system. • The player cannot play audio tracks in MP3PRO format. The playback order of MP3 audio tracks The playback order of albums and tracks recorded on a DATA CD is as follows.
12(27) 18(34) T 1:32:55 OFF OFF SET ON Various Play Mode Functions (Programme Play, Shuffle Play, Repeat Play, A-B Repeat DVD VIDEO Play) You can set the following play modes: • Programme Play (page 34) • Shuffle Play (page 35) • Repeat Play (page 36) • A-B Repeat Play (page 37) 3 Press X/x to select “SET t,” then press ENTER. “TRACK” is displayed when you play a VIDEO CD or CD. PROGRAM Note ALL CLEAR 1. TITLE 2. TITLE – – 3. TITLE – – 4. TITLE – – 5. TITLE – – 6. TITLE – – 7.
Next, press X/x or the number buttons to select “03” under “C,” then press ENTER. PROGRAM 1 Follow steps 1 through 3 of “Creating your own programme (Programme Play).” 2 Select the programme number of the title, chapter, or track you want to change or cancel using X/x or the number buttons, and press c. 3 Follow step 5 for new programming. To cancel a programme, select “--” under “T,” then press ENTER.
1 Press DISPLAY twice during playback (when playing a CD, press once). Playing repeatedly (Repeat Play) The Control Menu appears. 2 Press X/x to select (SHUFFLE), then press ENTER. The options for “SHUFFLE” appear. 12(27) 18(34) T 1:32:55 DVD VIDEO You can play all of the titles or tracks on a disc or a single title, chapter, or track repeatedly. You can use a combination of Shuffle or Programme Play modes. OFF OFF TITLE CHAPTER 3 CLEAR Press X/x to select the item to be shuffled.
◆ When playing a VIDEO CD or CD • DISC: repeats all of the tracks. • TRACK: repeats the current track. 2 ◆ When playing a DATA CD (MP3 audio) • DISC: repeats all of the albums. • ALBUM: repeats the current album. • TRACK: repeats the current track. 12(27) 18(34) T 1:32:55 DVD VIDEO OFF SET OFF 3 Press CLEAR, or select “OFF” in step 2. Press X/x to select “SET t,” then press ENTER. Playing Discs ◆ When Programme Play or Shuffle Play is activated • ON: repeats Programme Play or Shuffle Play.
To return to normal play Press CLEAR, or select “OFF” in step 3. To turn off the Control Menu Press DISPLAY repeatedly until the Control Menu is turned off. Notes • When you set A-B Repeat Play, the settings for Shuffle Play, Repeat Play, and Programme Play are cancelled. • A-B Repeat Play does not work for titles containing still pictures on a DVD-RW in VR mode. • A-B Repeat Play does not work across multiple titles on a DVD-RW in VR mode.
Searching for a Scene Searching for a Particular Point on a Disc (Scan, Slow-motion Play, Press m or M while playing a disc. When you find the point you want, press H to return to normal speed. Each time you press m or M during scan, the playback speed changes. With each press the indication changes as shown below. Actual speeds may differ with some discs.
Using the Playback Dial on the player (DVP-NS330/NS333 only) You can search for a particular point on a disc in various ways using the Playback Dial. To go to the next chapter/track/scene During playback, briefly turn the Playback Dial clockwise to skip to the next chapter/ track/scene, or counterclockwise to skip to the previous ones.
◆ When playing a VIDEO CD with PBC Playback SCENE INDEX To turn off the Control Menu Press DISPLAY repeatedly until the Control Menu is turned off. To search for a scene using the time code (DVD VIDEO/DVD-RW only) ◆ When playing a CD TRACK In step 2, select TIME/TEXT. “T **:**:**” (playing time of the current title) is selected. ◆ When playing a DATA CD (MP3 audio) ALBUM 2 Press ENTER. “T **:**:**” changes to “T --:--:--.
Searching by Scene (PICTURE NAVIGATION) z Hint You can also select “PICTURE NAVIGATION” from the Control Menu (page 12). Notes You can divide the screen into 9 subscreens and find the desired scene quickly. • The “PICTURE NAVIGATION” is not available when playing Super VCDs. • Depending on the disc, you may not be able to select all functions. • The sound is muted when using this function.
Viewing Information About the Disc Checking the Playing Time and Remaining Time TIME/TEXT ◆ When playing a VIDEO CD (with PBC functions) • *:* (minutes: seconds) Playing time of the current scene ◆ When playing a VIDEO CD (without PBC functions) or CD • T *:* (minutes: seconds) Playing time of the current track • T–*:* Remaining time of the current track • D *:* Playing time of the current disc • D –*:* Remaining time of the current disc ◆ When playing a DATA CD (MP3 audio) • *:* (minutes: seconds) Playi
Checking the information on the front panel display You can view the time information and text displayed on the TV screen also on the front panel display. The information on the front panel display changes as follows when you change the time information on your TV screen.
To turn off the Control Menu Checking the Play Information Press DISPLAY repeatedly until the Control Menu is turned off. You can check information such as the bit rate or the disc layer that is being played. By pressing DISPLAY repeatedly, you can display either “BIT RATE” or “LAYER,” whichever was selected in “ADVANCED.
Checking the play information of a DATA CD By pressing TIME/TEXT while playing MP3 audio tracks on a DATA CD, you can display the audio bit rate (the amount of data per second of the current audio).
Sound Adjustments Changing the Sound DISPLAY 1 Press (audio) during playback. ◆ When playing a DVD-RW The types of sound tracks recorded on a disc are displayed. The default setting is underlined. Example: • 1: MAIN (main sound) • 1: SUB (sub sound) • 1: MAIN+SUB (main and sub sound) ◆ When playing a VIDEO CD, CD, or DATA CD (MP3 audio) The default setting is underlined.
Displaying the audio information of the disc z Hint For Dolby Digital and DTS, “LFE” is always enclosed in a solid line regardless of the LFE signal component being output. Press DISPLAY during playback to display the Control Menu. Select “AUDIO” using X/x. The channels being played are displayed on the screen. For example, in Dolby Digital format, multiple signals ranging from monaural to 5.1 channel signals can be recorded on a DVD VIDEO.
TV Virtual Surround Settings (TVS) * For DVP-NS430/NS433 only. SUR To cancel the setting Select “OFF” in step 2. ◆TVS DYNAMIC Creates virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers (shown below). This mode is effective when the distance between the front L and R speakers is short, such as with built-in speakers on a stereo TV. TV ◆TVS WIDE Creates virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers.
L R L: Front speaker (left) R: Front speaker (right) : Virtual speaker z Hints • You can select “TVS” by pressing the SURROUND button on the player. • You can also select “TVS” from the Control Menu (page 12). Notes • When the playing signal does not contain a signal for the rear speakers, the surround effects will be difficult to hear. • When you select one of the TVS modes, turn off the surround setting of the connected TV or amplifier (receiver).
Enjoying Movies Changing the Angles Displaying the Subtitles If subtitles are recorded on the discs, you can change the subtitles or turn them on and off whenever you want while playing a DVD. If various angles (multi-angles) for a scene are recorded on the DVD VIDEO, “ ” appears in the front panel display. This means that you can change the viewing angle. 1 Press (subtitle) during Enjoying Movies playback. The following display appears. 1 Press 1:ENGLISH (angle) during playback.
Adjusting the Picture Quality (BNR) 4 Press ENTER. The disc plays with the setting you selected. To cancel the “BNR” setting The Block Noise Reduction (BNR) function adjusts the picture quality by reducing the “block noise” or mosaic like patterns that appear on your TV screen. Select “OFF” in step 3. To turn off the Control Menu Press DISPLAY repeatedly until the Control Menu is turned off. Notes • If the outlines of the images on your screen should become blurred, set “BNR” to “OFF.
Adjusting the Playback Picture (CUSTOM PICTURE MODE) You can adjust the video signal of the DVD or VIDEO CD from the player to obtain the picture quality you want. Choose the setting that best suits the programme you are watching. • CINEMA 2: White colours become brighter and black colours become richer, and the colour contrast is increased. z Hints • When you watch a movie, “CINEMA 1” or “CINEMA 2” is recommended. • The picture can be adjusted by pressing the PICTURE MODE button on the player as well.
Enhancing the Playback Picture (DIGITAL VIDEO ENHANCER) The Digital Video Enhancer (DVE) function makes the picture appear clear and crisp by enhancing the outlines of images on your TV screen. Also, this function can soften the images on the screen. 3 Press X/x to select a level. • • • • 1: enhances the outline. 2: enhances the outline more than 1. 3: enhances the outline more than 2. SOFT: softens the image (DVD only). 4 Press ENTER. The disc plays with the setting you selected.
3 Using Various Additional Functions The options for “PARENTAL CONTROL” appear. Locking Discs (CUSTOM 12(27) 18(34) T 1:32:55 PARENTAL CONTROL, PARENTAL CONTROL) You can set two kinds of playback restrictions for the desired disc. • Custom Parental Control You can set playback restrictions so that the player will not play inappropriate discs. • Parental Control Playback of some DVD VIDEOs can be limited according to a predetermined level such as the age of the users.
To turn off the Custom Parental Control function 1 Follow steps 1 through 3 of “Custom Parental Control.” 2 Press X/x to select “OFF t,” then press ENTER. 3 Enter your 4-digit password using the number buttons, then press ENTER. Number buttons To play a disc for which Custom Parental Control is set 1 Insert the disc for which Custom Parental Control is set. The “CUSTOM PARENTAL CONTROL” display appears. CUSTOM PARENTAL CONTROL Custom parental control is already set.
◆ When you have already registered a password The display for entering the password appears. PARENTAL CONTROL LEVEL: STANDARD: OFF 8: 7: 6: 5: PARENTAL CONTROL Enter password, then press OFF ENTER NC17 R . 8 Select the level you want using X/x, then press ENTER. Parental Control setting is complete. 4 Enter or re-enter your 4-digit password using the number buttons, then press ENTER. PARENTAL CONTROL LEVEL: STANDARD: 4: PG13 USA The display for setting the playback limitation level appears.
Area Code 58 Changing the password Standard Code number Argentina 2044 Australia 2047 Austria 2046 Belgium 2057 Brazil 2070 Canada 2079 Chile 2090 China 2092 Denmark 2115 Finland 2165 France 2174 Germany 2109 India 2248 Indonesia 2238 1 Press DISPLAY while the player is in stop mode. The Control Menu appears. 2 Press X/x to select (PARENTAL CONTROL), then press ENTER. The options for “PARENTAL CONTROL” appear. 3 Press X/x to select “PASSWORD t,” then press ENTER.
Controlling Your TV with the Supplied Remote You can control the sound level, input source, and power switch of your Sony TV with the supplied remote. Controlling other TVs with the remote You can control the sound level, input source, and power switch of non-Sony TVs as well. If your TV is listed in the table below, set the appropriate manufacturer’s code. 1 While holding down TV [/1, press the number buttons to select your TV’s manufacturer’s code (see the table below). 2 Release TV [/1.
3 Press X/x to select “CUSTOM,” Settings and Adjustments Using the Setup Display By using the Setup Display, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup Display, among other things. For details on each Setup Display item, see pages from page 61 to page 65. Note Playback settings stored in the disc take priority over the Setup Display settings and not all the functions described may work. then press ENTER.
6 Select a setting using X/x, then press ENTER. The setting is selected and setup is complete. Example: “4:3 PAN SCAN” Setting the Display or Sound Track Language (LANGUAGE SETUP) Selected setting SCREEN SETUP TV TYPE: SCREEN SAVER: BACKGROUND: LINE: 4:3 PAN SCAN ON JACKET PICTURE VIDEO “LANGUAGE SETUP” allows you to set various languages for the on-screen display or sound track. Select “LANGUAGE SETUP” in the Setup Display. To use the display, see “Using the Setup Display” (page 60).
Settings for the Display (SCREEN SETUP) Choose settings according to the TV to be connected. Select “SCREEN SETUP” in the Setup Display. To use the display, see “Using the Setup Display” (page 60). The default settings are underlined. SCREEN SETUP TV TYPE: SCREEN SAVER: BACKGROUND: LINE: 16:9 ON JACKET PICTURE VIDEO Note Depending on the DVD, “4:3 LETTER BOX” may be selected automatically instead of “4:3 PAN SCAN” or vice versa.
Custom Settings (CUSTOM SETUP) ◆ PAUSE MODE (DVD VIDEO/DVD-RW only) Selects the picture in pause mode. AUTO The picture, including subjects that move dynamically, is output with no jitter. Normally select this position. FRAME The picture, including subjects that do not move dynamically, is output in high resolution. Use this to set up playback related and other settings. Select “CUSTOM SETUP” in the Setup Display. To use the display, see “Using the Setup Display” (page 60).
◆ DOWNMIX (DVD VIDEO/DVD-RW only) Settings for the Sound (AUDIO SETUP) “AUDIO SETUP” allows you to set the sound according to the playback and connection conditions. Select “AUDIO SETUP” in the Setup Display. To use the display, see “Using the Setup Display” (page 60). The default settings are underlined.
If you connect a component that does not conform to the selected audio signal, a loud noise (or no sound) will come out from the speakers, damaging your ears or speakers. ◆ DTS (DVD VIDEO only) Selects whether or not to output DTS signals. OFF Select this when the player is connected to an audio component without a built-in DTS decoder. ON Select this when the player is connected to an audio component with a built-in DTS decoder.
The picture is black and white. Additional Information Troubleshooting If you experience any of the following difficulties while using the player, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer. Power The power is not turned on. , Check that the mains lead is connected securely. Picture There is no picture/picture noise appears. , Re-connect the connecting cord securely. , The connecting cords are damaged.
Operation The disc does not start playing from the beginning. The remote does not function. , Programme Play, Shuffle Play, Repeat Play, or A-B Repeat Play has been selected (page 34). , Resume play has taken effect (page 28). , The batteries in the remote are weak. , There are obstacles between the remote and the player. , The distance between the remote and the player is too far. , The remote is not pointed at the remote sensor on the player. The disc does not play. , The disc is turned over.
, The angle can only be changed when the “ ” indicator lights up on the front panel display (page 9). , The DVD prohibits changing of the angles. Self-diagnosis Function The player does not operate properly. display) , When static electricity, etc., causes the player to operate abnormally, unplug the player. 5 numbers or letters are displayed on the screen and on the front panel display. , The self-diagnosis function was activated. (See the table on page 68.
Glossary Chapter (page 9) Sections of a picture or a music feature that are smaller than titles. A title is composed of several chapters. Depending on the disc, no chapters may be recorded. Dolby Digital (page 18, 65) Digital audio compression technology developed by Dolby Laboratories. This technology conforms to 5.1-channel surround sound. The rear channel is stereo and there is a discrete subwoofer channel in this format. Dolby Digital provides the same 5.
Scene (page 9) On a VIDEO CD with PBC (playback control) functions, the menu screens, moving pictures and still pictures are divided into sections called “scenes.” Title (page 9) The longest section of a picture or music feature on a DVD, movie, etc., in video software, or the entire album in audio software. Track (page 9) Sections of a picture or a music feature on a CD or VIDEO CD (the length of a song).
Specifications System General Laser: Semiconductor laser Signal format system: PAL/NTSC Power requirements: 220 – 240 V AC, 50/60 Hz Power consumption: 13 W Dimensions (approx.): DVP-NS330/NS333: 430 × 55.5 × 244 mm (width/height/ depth) incl. projecting parts DVP-NS430/NS433: 430 × 55.5 × 237 mm (width/height/ depth) incl. projecting parts Mass (approx.): 2.
Language Code List For details, see pages 47, 51, 61. The language spellings conform to the ISO 639: 1988 (E/F) standard.
Index Numerics 16:9 62 4:3 LETTER BOX 62 4:3 PAN SCAN 62 5.
Printed on 100% recycled paper.