3-074-264-11(1) CD/DVD Player Operating Instructions DVP-NS305 DVP-NS310 DVP-NS405 DVP-NS410 © 2002 Sony Corporation
WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Mains lead must only be changed at a qualified service shop. This appliance is classified as a CLASS 1 LASER product. The CLASS 1 LASER PRODUCT MARKING is located on the rear exterior. CAUTION The use of optical instruments with this product will increase eye hazard.
On adjusting volume Precautions On safety • Caution – The use of optical instruments with this product will increase eye hazard. • Should any solid object or liquid fall into the cabinet, unplug the player and have it checked by qualified personnel before operating it any further. On power sources • The player is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the player itself has been turned off.
Table of Contents WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Welcome! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Enjoying Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Changing the Angles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Displaying the Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Adjusting the Picture Quality (BNR). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Adjusting the Playback Picture (CUSTOM PICTURE MODE). . . . . . . . . . . .
About this Manual Check your model name The instructions in this manual are for the 4 models: DVP-NS305, DVP-NS310, DVPNS405, and DVP-NS410. Check your model name by looking at the front panel of the player. DVP-NS405 is the model used for illustration purposes. Any difference in operation is clearly indicated in the text, for example, “DVP-NS405 only.” • Instructions in this manual describe the controls on the remote.
• A disc that has a non-standard shape (e.g., card, heart). • A disc with paper or stickers on it. • A disc that has the adhesive of cellophane tape or a sticker still left on it. Notes about the Discs • To keep the disc clean, handle the disc by its edge. Do not touch the surface. Note Some CD-Rs, CD-RWs, DVD-Rs, or DVD-RWs (in video mode) cannot be played on this player due to the recording quality or physical condition of the disc, or the characteristics of the recording device.
Index to Parts and Controls For more information, refer to the pages indicated in parentheses. Front panel DVP-NS305/NS310 DVP-NS405/NS410 A [/1 (on/standby) button/indicator (28) Lights up in green when the power is on and lights up in red when the player is in standby mode.
Front panel display When playing back a DVD Disc type Playing status Lights up when you can change the angle (48) Lights up during Repeat Play (38) Current audio signal (44) Current title/chapter or playing time (43) When playing back a VIDEO CD with Playback Control (PBC) (33) Disc type Playing status Lights up during A-B Repeat Play (39) Current scene or playing time (43) When playing back a CD, DATA CD (MP3 audio), or VIDEO CD (without PBC) Playing status Disc type Lights up during Repeat Pla
Rear panel DVP-NS305/NS310 DIGITAL OUT L CENTER LINE (RGB) - TV PCM/DTS/MPEG/ DOLBY DIGITAL COAXIAL LINE OUT R -AUDIO- L VIDEO DVP-NS405/NS410 DIGITAL OUT L CENTER LINE (RGB) - TV PCM/DTS/MPEG/ DOLBY DIGITAL COAXIAL OPTICAL LINE OUT R -AUDIO- L S VIDEO OUT VIDEO A DIGITAL OUT (COAXIAL) jack (22) (23) (24) B DIGITAL OUT (OPTICAL) jack (DVP-NS405/NS410 only) (22) (23) (24) C LINE (RGB)-TV jack (16) (18) 10 D S VIDEO OUT jack (DVP-NS405/ NS410 only) (18) E LINE OUT (VIDEO) jack (18) F LI
Remote DVP-NS305 A B C D E F G H Z (open/close) button (29) SUR (surround) button (45) (subtitle) button (48) (audio) button (44) (angle) button (48) CLEAR button (36) ./> (previous/next) buttons (29) m/M (scan/slow) buttons (30) I X (pause) button (29) J H (play) button (28) The H button has a tactile dot.
DVP-NS310/NS405/NS410 A TV [/1 (on/standby) button (56) B Z (open/close) button (29) C Number buttons (33) The number 5 button has a tactile dot.* D CLEAR button (36) E (subtitle) button (48) F (audio) button (44) G ./> (previous/next) buttons (29) H m/M (scan/slow) buttons (30) I X (pause) button (29) J H (play) button (28) The H button has a tactile dot.
Guide to On-Screen Displays (Control Bar) The following explains the Control Bar. The Control Bar is used for making adjustments to the settings or displaying information during playback. The displayed contents differ according to the type of disc being played. The numbers in parentheses indicate reference pages. Displaying the Control Bar during playback The following displays appear when the DISPLAY button is pressed repeatedly during playback.
Displaying the Control Bar in stop mode The following displays appear when the DISPLAY button is repeatedly pressed during stop mode. You can make basic adjustments and customize the player to suit your viewing preferences. ◆Display 1 The following settings can be made. ◆Display 4 Shows the same information as Display 3 during playback. T41 – 8 T 1:01:57 m ◆No display m ◆Return to Display 1 QUICK A SETUP (58) • Select QUICK to make the minimum number of basic adjustments for using the player.
Simple Start Guide Quick Overview You can control the player using the supplied remote. Insert two R6 (size AA) batteries by matching the 3 and # ends on the batteries to the markings inside the compartment. When using the remote, point it at the remote sensor on the player. Simple Start Guide A quick overview presented in this guide will give you enough information to start using the player for your enjoyment. To use the surround sound features of this player, refer to “Hookups” on page 18.
Step 3: TV Hookups Connect a SCART (EURO AV) cord (not supplied) and mains lead in the order (1~3) shown below. Be sure to connect the mains lead last.
Step 4: Playing a Disc Simple Start Guide With the playback side facing down A Turn on the TV. B Press [/1 on the player. C Switch the input selector on your TV so that the signal from the player appears on the TV screen. D Press A on the player to open the disc tray. E Place the disc on the tray with the playback side facing down. F Press H. After Step 6 Depending on the disc, a menu may be displayed on the TV screen.
Hookups Hooking Up the Player Follow Steps 1 to 4 to hook up and adjust the settings of the player. Before you start, disconnect the mains leads, check that you have all of the supplied accessories, and insert the batteries into the remote (page 15). Notes • Plug cords securely to prevent unwanted noise. • Refer to the instructions supplied with the components to be connected.
A If you are connecting to a SCART (EURO AV) input jack Hookups Connect the SCART (EURO AV) cord (not supplied). Be sure to make the connections firmly to avoid hum and noise. When you connect using the SCART (EURO AV) cord, check that the TV conforms to S video or RGB signals. Refer to the operating instructions supplied with the TV to be connected. Also, when you set “LINE” to “S VIDEO” or “RGB” under “SCREEN SETUP” in the Setup Display (page 60), use a SCART (EURO AV) cord that conforms to each signal.
Step 2: Connecting the Audio Cords Refer to the chart below to select the connection that best suits your system. Be sure to also read the instructions for the components you wish to connect. Select a connection Select one of the following connections, A through D .
A Connecting to your TV This connection will use your TV speakers for sound. If you use the SCART (EURO AV) cord in A of “Step 1: Connecting the Video Cords” (page 18), you do not have to connect audio cords to your TV.
B Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to an MD deck or DAT deck If the stereo amplifier (receiver) has audio input jacks L and R only, use B-1 . If the amplifier (receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use B-2 . In this case, you can also connect the player directly to the MD deck or DAT deck without using your stereo amplifier (receiver).
C Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro Logic) decoder and 3 to 6 speakers CD/DVD player DIGITAL OUT Hookups You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multichannel audio (Dolby Digital) discs. If your amplifier (receiver) has L and R audio input jacks only, use C-1 . If your amplifier (receiver) has a digital input jack, use C-2 .
D Connecting to an AV amplifier (receiver) with a digital input jack having a Dolby Digital, MPEG audio, or DTS decoder and 6 speakers This connection will allow you to use the Dolby Digital, MPEG audio, or DTS decoder function of your AV amplifier (receiver). You are not able to enjoy the surround sound effects of this player.
Step 3: Connecting the Mains Lead Plug the player and TV mains lead (power cord) into a mains. Hookups Step 4: Quick Setup Follow the steps below to make the minimum number of basic adjustments for using the player. To skip an adjustment, press >. To return to the previous adjustment, press .. DVP-NS305 DVP-NS310/405/410 LANGUAGE SETUP OSD: MENU: AUDIO: SUBTITLE: ENGLISH ENGLISH FRANÇAIS DEUTSCH ITALIANO NEDERLANDS 5 Press X/x to select a language. ENTER 1 Turn on the TV. 2 Press [/1.
SCREEN SETUP TV TYPE: SCREEN SAVER: BACKGROUND: LINE: 16:9 ON JACKET PICTURE VIDEO VIDEO S VIDEO RGB 9 Press X/x to select the type of signal you want to output from the LINE (RGB)-TV jack. • Select “DIGITAL OUTPUT.” The Setup Display for “DOLBY DIGITAL” appears. 12Press X/x to select the type of Dolby Digital signal you wish to send to your amplifier (receiver). Choose the signal that matches the audio connection you selected on pages 22 to 24 ( B through D ).
15Press ENTER. Enjoying the surround sound effects Hookups Quick Setup is finished. All connections and setup operations are complete. If your AV amplifier (receiver) has an MPEG audio decoder, set “MPEG” to “MPEG” (page 63). To enjoy the surround sound effects of this player or your amplifier (receiver), set the following items as described below for the audio connection you selected on pages 22 to 24 ( B through D ).
4 Press A on the player, and place a disc on the disc tray. Playing Discs Playing Discs Depending on the DVD or VIDEO CD, some operations may be different or restricted. Refer to the operating instructions supplied with your disc. Power [/1 indicator A H/Playback Dial MODE CHANGE (DVPNS405/NS410 only) DVP-NS305 With the playback side facing down 5 Press H. The disc tray closes, and the player starts playback (continuous play). Adjust the volume on the TV or the amplifier (receiver).
Notes on playing DVDs with a DTS sound track Note If you don’t operate the player or the remote for more than 30 minutes when a disc is not playing, the player automatically enters standby mode (Auto Power Off function). To turn off this function, set “AUTO POWER OFF” in “CUSTOM SETUP” to “OFF” (page 61). Additional operations DVP-NS305 DVP-NS310/405/410 Operation Go back to the previous chapter, track, or scene in continuous play mode Press .
When the player is in standby mode, press O RETURN, ENTER, and then [/1 on the remote. The player turns on and “LOCKED” appears on the front panel display. The Z button on the player or the remote does not work while the Child Lock is set. To unlock the disc tray When the player is in standby mode, press O RETURN, ENTER, and then [/1 again.
Playback direction × 2B (DVD/CD only) t 1M t 2M Opposite direction × 2b (DVD only) t 1m t 2m Watching frame by frame (Slowmotion Play) Press m or M when the player is in pause mode. To return to the normal speed, press H. Each time you press m or M during Slow-motion play, the playback speed changes. Two speeds are available.
Resuming Playback from the Point Where You Stopped the Disc (Resume Play/Multi-disc Resume) The player remembers the point where you stopped the disc. DVP-NS305 DVP-NS310/405/410 Notes • The point where you stopped playing is cleared when: – you change the play mode. – you change the settings on the Setup Display. – you open the disc tray (DVP-NS305/NS310 only). – you disconnect the mains lead.
Using the DVD’s Menu DVP-NS305 PBC (Playback Control) allows you to play VIDEO CDs interactively by following the menu on the TV screen. DVP-NS305 DVP-NS310/405/410 Playing Discs A DVD is divided into long sections of a picture or a music feature called “titles.” When you play a DVD which contains several titles, you can select the title you want using the TOP MENU button.
To return to the menu Press O RETURN. z Hint To play without using PBC, press ./> while the player is stopped to select a track, then press H or ENTER. “Play without PBC” appears on the TV screen and the player starts continuous play. You cannot play still pictures such as a menu. To return to PBC playback, press x twice then press H. Playing an MP3 Audio Track You can play back DATA CDs (CD-ROMs/ CD-Rs/CD-RWs) recorded in MP3 (MPEG 1 Audio Layer 3) format.
1( 30) ROCK BEST HIT KARAOKE JAZZ R&B MY FAVORITE SONGS CLASSICAL SALSA OF CUBA BOSSANOVA Select an album using X/x and press ENTER. The list of tracks contained in the album appears. JAZZ 1(90) 0 0 0 0 0 0 0 3 1 2 3 4 5 6 7 SHE IS SPECIAL ALL YOU NEED IS ... SPICY LIFE HAPPY HOUR RIVER SIDE 5 TAKE TIME,TAKE TIME Select a track using X/x and press ENTER. The selected track starts playing. When a track or album is being played, its title is shaded.
When you insert a DATA CD and press H, the numbered tracks are played sequentially, from 1 through 7. Any sub-albums/tracks contained within a currently selected album take priority over the next album in the same tree. (Example: C contains D so 4 is played before 5.) When you press MENU and the list of MP3 albums appears (page 34), the albums are arranged in the following order: A t B t C t D t F t G. Albums that do not contain tracks (such as album E) do not appear in the list.
2 Press C/c to select (PROGRAM), then press ENTER. PROGRAM ALL CLEAR 1. TITLE 0 2 – 0 3 2. TITLE – – 3. TITLE – – 4. TITLE – – 5. TITLE – – 6. TITLE – – 7. TITLE – – “TRACK” is displayed when you play a VIDEO CD or CD. PROGRAM T –– 01 02 03 04 05 Selected title and chapter ◆ When playing a VIDEO CD or CD For example, select track “02.” Press X/x to select “02” under “T,” then press ENTER. Titles or tracks recorded on a disc 3 Selected track Press c.
number (DVP-NS310/NS405/NS410 only). 3 TITLE Follow Step 4 for new programming. To cancel a programme, select “--” under “T,” then press ENTER. To cancel all the titles, chapters, or tracks in the programmed order ◆ When playing a DVD • TITLE • CHAPTER 1 Follow Steps 1 and 2 of “Creating your own programme (Programme Play).” ◆ When playing a VIDEO CD or CD • TRACK 2 3 Press X and select “ALL CLEAR.
1 Press DISPLAY during playback. The following Control Bar appears. Repeating a specific portion (AB Repeat Play) You can play a specific portion of a title, chapter or track repeatedly. (This function is useful when you want to memorize lyrics, etc.) 2 DVP-NS305 DVP-NS310/405/410 Playing Discs Press C/c to select (REPEAT), then press ENTER repeatedly to select the item to be repeated. CHAPTER CLEAR ◆ When playing a DVD • DISC: repeats all of the titles.
To return to normal play Press CLEAR. To turn off the Control Bar Press DISPLAY repeatedly until the Control Bar is turned off. Note When you set A-B Repeat Play, the settings for Shuffle Play, Repeat Play, and Programme Play are cancelled.
2 Press SEARCH MODE repeatedly Searching for a Scene Searching for a Title/ Chapter/Track/Index/ Scene (Search mode) to select the search method. ◆ When playing a DVD (TITLE), (CHAPTER), (TIME/TEXT), or (NUMBER INPUT) Select “TIME/TEXT” to search for a starting point by inputting the time code. ◆ When playing a VIDEO CD (TRACK) or (INDEX) DVP-NS305 DVP-NS310/405/410 Number buttons CLEAR SEARCH MODE ENTER 1 Press SEARCH MODE. The following display appears.
Viewing Information About the Disc Checking the Playing Time and Remaining Time You can check the playing time and remaining time of the current title, chapter, or track. Also, you can check the DVD/CD text or track name (MP3 audio) recorded on the disc.
Checking the information on the front panel display You can view the time information and text displayed on the TV screen also on the front panel display. The information on the front panel display changes as follows when you change the time information on your TV screen.
2 Press Sound Adjustments Changing the Sound When playing a DVD recorded in multiple audio formats (PCM, Dolby Digital, MPEG audio, or DTS), you can change the audio format. If the DVD is recorded with multilingual tracks, you can also change the language. With CDs, DATA CDs, or VIDEO CDs, you can select the sound from the right or left channel and listen to the sound of the selected channel through both the right and left speakers.
• LFE (Low Frequency Effect) signal Note If “DTS” is set to “OFF” in “AUDIO SETUP,” the DTS track selection option will not appear on the screen even if the disc contains DTS tracks (page 63).
2 Press C/c to select TV (SURROUND), then press ENTER repeatedly to select one of the TVS sounds. Refer to the following explanations given for each item. • TVS DYNAMIC • TVS WIDE • TVS NIGHT • TVS STANDARD TVS DYNAMIC To cancel the setting Select “OFF” in Step 2. To turn off the Control Bar Press DISPLAY repeatedly until the Control Bar is turned off. ◆TVS NIGHT Large sounds, such as explosions, are suppressed, but the quieter sounds are unaffected.
• “TVS NIGHT” only works with Dolby Digital discs. However, not all discs will respond to the “TVS NIGHT” function in the same way. • If you use the DIGITAL OUT (OPTICAL or COAXIAL) jack and set “DOLBY DIGITAL” to “DOLBY DIGITAL” or “DTS” to “ON” in “AUDIO SETUP,” sound will come from your speakers but it will not have the TVS effect.
Displaying the Subtitles Enjoying Movies Changing the Angles If various angles (multi-angles) for a scene are recorded on the DVD, “ ” appears in the front panel display. This means that you can change the viewing angle. DVP-NS305 If subtitles are recorded on the discs, you can change the subtitles or turn them on and off whenever you want while playing a DVD. DVP-NS305 DVP-NS310/405/410 DVP-NS310/405/410 1 Press (subtitle) during playback. 1 Press (angle) during playback.
To cancel the “BNR” setting Adjusting the Picture Quality (BNR) The Block Noise Reduction (BNR) function adjusts the picture quality by reducing the “block noise” or mosaic like patterns that appear on your TV screen. DVP-NS305 DVP-NS310/405/410 DISPLAY 1 Press DISPLAY twice during To turn off the Control Bar Press DISPLAY repeatedly until the Control Bar is turned off. Notes • If the outlines of the images on your screen should become blurred, set “BNR” to “OFF.
Adjusting the Playback Picture (CUSTOM PICTURE MODE) You can adjust the video signal of the DVD or VIDEO CD from the player, to obtain the picture quality you want. Choose the setting that best suits the programme you are watching. DVP-NS305 DVP-NS310/405/410 • DYNAMIC 1: produces a bold dynamic picture by increasing the picture contrast and the colour intensity. • DYNAMIC 2: produces a more dynamic picture than DYNAMIC 1 by further increasing the picture contrast and the colour intensity.
Enhancing the Playback Picture (DIGITAL VIDEO • • • • 1: enhances the outline. 2: enhances the outline more than 1. 3: enhances the outline more than 2. SOFT: softens the image (DVD only). ENHANCER) (DVP-NS405/NS410 only) To cancel the “DIGITAL VIDEO ENHANCER” setting The Digital Video Enhancer (DVE) function makes the picture appear clear and crisp by enhancing the outlines of images on your TV screen. Also, this function can soften the images on the screen. DVP-NS405/NS410 Select “OFF” in Step 2.
QUICK Using Various Additional Functions Locking Discs (CUSTOM PARENTAL CONTROL, PARENTAL CONTROL) 3 You can set two kinds of playback restrictions for the desired disc. • Custom Parental Control You can set playback restrictions so that the player will not play inappropriate discs. • Parental Control Playback of some DVDs can be limited according to a predetermined level such as the age of the users. Scenes may be blocked or replaced with different scenes.
password (DVP-NS310/NS405/NS410 only). The player is ready for playback. PARENTAL CONTROL Enter password, then press 5 ENTER . Enter or re-enter your 4-digit password by pressing X/x to select the digit, followed by C/c to move the cursor, then press ENTER. You can also use the number buttons to enter your password (DVP-NS310/ NS405/NS410 only). “Custom parental control is set.” appears when you enter your password.
2 Press X/x to select (PARENTAL CONTROL), then press ENTER. You can also use the number buttons to enter your password (DVP-NS310/ NS405/NS410 only). The display for setting the playback limitation level appears. The options for “PARENTAL CONTROL” appear. OFF ON PLAYER PASSWORD 3 PARENTAL CONTROL LEVEL: STANDARD: Press X/x to select “PLAYER t,” then press ENTER. 5 ◆ If you have not entered a password The display for registering a new password appears.
Area Code PARENTAL CONTROL LEVEL: STANDARD: 4: PG13 USA The lower the value, the stricter the limitation. To turn off the Parental Control function Set “LEVEL” to “OFF” in Step 8. To play a disc for which Parental Control is set 1 2 Insert the disc and press H. The display for entering your password appears. z Hint If you forget your password, remove the disc and repeat Steps 1 to 3 of “Parental Control (limiting playback by children).
You can also use the number buttons to enter your password (DVP-NS310/ NS405/NS410 only). 6 To confirm your password, re-enter it using X/x to select the digit, followed by C/c to move the cursor, then press ENTER. You can also use the number buttons to enter your password (DVP-NS310/ NS405/NS410 only). Controlling Your TV with the Supplied Remote You can control the sound level, input source, and power switch of your Sony TV with the supplied remote.
Controlling other TVs with the remote (DVP-NS310/NS405/ NS410 only) You can control the sound level, input source, and power switch of non-Sony TVs as well. If your TV is listed in the table below, set the appropriate manufacturer’s code. 1 While holding down TV [/1, press the number buttons to select your TV’s manufacturer’s code (see the table below). 2 Release TV [/1.
Settings and Adjustments LANGUAGE SETUP OSD: MENU: AUDIO: SUBTITLE: ENGLISH ENGLISH ORIGINAL ENGLISH Using the Setup Display By using the Setup Display, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup Display, among other things. For details on each Setup Display item, see pages from 59 to 63.
Selected setting SCREEN SETUP TV TYPE: SCREEN SAVER: BACKGROUND: LINE: 4:3 PAN SCAN ON JACKET PICTURE VIDEO Setting the Display or Sound Track Language (LANGUAGE SETUP) “LANGUAGE SETUP” allows you to set various languages for the on-screen display or sound track. To turn off the display Press DISPLAY repeatedly until the display is turned off. Select “LANGUAGE SETUP” in the Setup Display. To use the display, see “Using the Setup Display” (page 58).
Settings for the Display (SCREEN SETUP) Choose settings according to the TV to be connected. Select “SCREEN SETUP” in the Setup Display. To use the display, see “Using the Setup Display” (page 58). The default settings are underlined. SCREEN SETUP TV TYPE: SCREEN SAVER: BACKGROUND: LINE: 16:9 ON JACKET PICTURE VIDEO Note Depending on the DVD, “4:3 LETTER BOX” may be selected automatically instead of “4:3 PAN SCAN” or vice versa.
◆ PAUSE MODE (DVD only) Custom Settings (CUSTOM Selects the picture in pause mode. SETUP) AUTO The picture, including subjects that move dynamically, is output with no jitter. Normally select this position. FRAME The picture, including subjects that do not move dynamically, is output in high resolution. Use this to set up playback related and other settings. Select “CUSTOM SETUP” in the Setup Display. To use the display, see “Using the Setup Display” (page 58). The default settings are underlined.
◆ DOWNMIX (DVD only) Settings for the Sound (AUDIO SETUP) “AUDIO SETUP” allows you to set the sound according to the playback and connection conditions. Select “AUDIO SETUP” in the Setup Display. To use the display, see “Using the Setup Display” (page 58). The default settings are underlined.
AUDIO SETUP AUDIO ATT: OFF AUDIO DRC: STANDARD DOWNMIX: DOLBY SURROUND DIGITAL OUT: ON D-PCM DOLBY DIGITAL: MPEG: PCM DTS: OFF If you connect a component that does not conform to the selected audio signal, a loud noise (or no sound) will come out from the speakers, affecting your ears or causing the speakers to be damaged. ◆ DOLBY DIGITAL (DVD only) Selects the type of Dolby Digital signal. Select this when the player is connected to an audio component lacking a built-in Dolby Digital decoder.
Additional Information Troubleshooting that conforms to your TV (page 60). , Depending on the TV, the picture on the screen becomes black and white when you play a disc recorded in the NTSC colour system. Sound If you experience any of the following difficulties while using the player, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer. Power The power is not turned on.
The disc does not play. , The disc is turned over. Insert the disc with the playback side facing down on the disc tray. , The disc is skewed. , The player cannot play certain discs (page 6). , The region code on the DVD does not match the player. , Moisture has condensed inside the player (page 3). , The player cannot play CD-Rs, CD-RWs, DVD-Rs, or DVD-RWs (video mode) that are not finalized (page 6). The MP3 audio track cannot be played (page 34).
5 numbers or letters are displayed on the screen and on the front panel display. Self-diagnosis Function , The self-diagnosis function was activated. (See the table on page 66.) (When letters/numbers appear in the display) The disc tray does not open and “LOCKED” appears on the front panel display. , Child Lock is set (page 29). The disc tray does not open and “TRAY LOCKED” appears on the front panel display. , Contact your Sony dealer or local authorized Sony service facility.
Glossary Chapter (page 9) Sections of a picture or a music feature that are smaller than titles. A title is composed of several chapters. Depending on the disc, no chapters may be recorded. Dolby Digital (page 24, 63) Digital audio compression technology developed by Dolby Laboratories. This technology conforms to 5.1-channel surround sound. The rear channel is stereo and there is a discrete subwoofer channel in this format. Dolby Digital provides the same 5.
Specifications System General Laser: Semiconductor laser Signal format system: PAL/(NTSC) Power requirements: 220 – 240 V AC, 50/ 60 Hz Power consumption: 13 W Dimensions (approx.): 430 × 62 × 255 mm (w/h/d) incl. projecting parts Mass (approx.): 2.3 kg Operating temperature: 5 ° C to 35 ° C Operating humidity: 25 % to 80 % Audio characteristics Frequency response: DVD VIDEO (PCM 96 kHz): 2 Hz to 44 kHz (±1.0 dB)/DVD VIDEO (PCM 48 kHz): 2 Hz to 22 kHz (±0.5 dB)/CD: 2 Hz to 20 kHz (±0.
Language Code List For details, see pages 44, 48, 59. The language spellings conform to the ISO 639: 1988 (E/F) standard.
Index Numerics F 16:9 60 4:3 LETTER BOX 60 4:3 PAN SCAN 60 5.
Printed on 100% recycled paper.
