user manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Locations and Functions of Parts and Controls
- Chapter 3 Setting Up the VTR
- Chapter 4 Menu Settings
- 4-1 Registering and Storing Menu Settings
- 4-2 HOME Menu
- 4-2-1 Selecting the Output Signals(PB/EE)
- 4-2-2 Record Inhibit Mode (REC INH)
- 4-2-3 Selecting the Edit Mode and Edit Channel (ASSEMBLE or INS CUE)
- 4-2-4 Preread Settings (PRE READ)
- 4-2-5 Still-Picture Output (FREEZE)
- 4-2-6 Selecting the Capstan Servo Lock Mode (CAP LOCK)
- 4-2-7 Setting the Preroll Time (PREROLL TIME)
- 4-2-8 Selecting DMC Playback (DMC)
- 4-2-9 Recalling Edit Points (LAST EDIT)
- 4-3 TC Menu
- 4-3-1 Setting the Time Data (TIMER SEL/RESET/SET/HOLD)
- 4-3-2 Setting the Time Code Reader (TCR SEL)
- 4-3-3 Setting the Time Code Generator (TCG SOURCE/MODE)
- 4-3-4 Selecting the Time Code Running Mode (RUN MODE)
- 4-3-5 Selecting the Drop Frame Mode (DF/NDF)
- 4-3-6 Inserting VITC input source (VITC)
- 4-3-7 Selecting CTL Display Mode (TAPE TIMER)
- 4-3-8 Presetting Pull Down Time Code (PDPSET MENU)(when HKDV-507/507D is installed)
- 4-3-9 Presetting for Conversion From 24-frame Into 25-frame Time Code
- 4-3-10 Conversion of Time Code During Playback in 25F Mode (TC CONV)
- 4-3-11 Displaying the Pull Down Time Code (when HKDV-507/507D is installed)
- 4-3-12 Superimposition of Character Information (PD CHARA/CHARA SUPER/H-POS/V-POS)
- 4-3-13 Setting the VITC Insertion Line (VITC POS-1/POS-2)
- 4-3-14 Presetting for Conversion From 25-frame Into 24-frame Time Code
- 4-3-15 Conversion of Time Code During Playback in 24F Mode (TC CONV)
- 4-4 CUE Menu
- 4-5 PF1 Menu (Factory Settings)
- 4-6 PF2 Menu (Factory Settings)
- 4-7 SET UP Menu
- Chapter 5 Recording/Playback
- 5-1 Preparing for Recording
- 5-2 Recording
- 5-3 Preparing for Playback
- 5-3-1 Setting Switches and Menus
- 5-3-2 Adjusting the Audio Playback Level
- 5-3-3 Selecting the HD-SD Conversion Mode (when HKDV-501A is installed)
- 5-3-4 Selecting the Conversion Mode of the Effective Scanning Line Number
- 5-3-5 Improving the Vertical Resolution during Slow-Motion Playback (when HKDV-502 is installed)
- 5-4 Playback
- Chapter 6 Editing
- Appendix
- Maintenance
- Specifications
- Operation Information Display
- Error Messages and Warning Messages
- Glossary
- Menu List
- Items Related to the Hours Meter (H01~)
- Items Related to VTR Operations (001~)
- Items Related to Operation Panels (101~)
- Items Related to Remote Interface (201~)
- Items Related to Editing (301~)
- Items Related to Prerolling (401~)
- Items Related to Recording Protection (501~)
- Items Related to the Time Code (601~)
- Items Related to the Video Control (701~)
- Items Related to the Audio Control (801~)
- Items Related to Digital Processing (901~)
- Items Related to the Pull Down Control (A01~)
- Other Items (T01~)
- Index
- Table of Functions (Factory Default Settings)
Chapter 4 Menu Settings 4-55
Chapter 4 Menu Settings
4-5 PF1 Menu (Factory Settings)
The PF (Personal Function) 1 menu is used to register
frequently used menu items.
When shipped from the factory, the PF1 menu contains
the adjustment menu for video signals. If you later use
the PF1 menu to register items from other menus, you
can restore the PF1 menu to its original factory settings
by recalling SETUP BANK F from the VTR memory
banks.
For details on registration methods, see Section 4-1-3,
“Registering Items to the PF1/2 Menus” on page 4-3, and
on restoring factory-set menu items, see Section 4-1-4,
“VTR Memory Bank Function” on page 4-4.
To activate the PF1 menu screen
Press the PF1 button.
PF1 menu display
prst, 0.0 to 141.3%
[F2]
Button
Indication
Settings
[F1] Selects the input video signal.
SDI, SDTI
Note
The SDTI selection is operative only when the
optional HKDV-506A SDTI Board is installed.
Selects the reference signal for
output.
ext, input, auto
[F4]
Adjusts the Y, P
B, and P R output levels
simultaneously.
[F5] Adjusts the Y output level.
prst, 0.0 to 141.3%
[F6] Adjusts the P B output level.
prst, 0.0 to 141.3%
Function
Adjusts the P R output level.
Adjusts the setup level.
prst, –10.0 to +10.0
[F8]
PF1 menu (factory settings)
prst, 0.0 to 141.3%
P
B LEVEL (HD)
VIDEO IN
SERVO REF
MASTER LEVEL (HD)
Y LEVEL (HD)
P
R LEVEL (HD)
SETUP LEVEL (HD)
[F9] Adjusts the sync phase.
prst, –128 to +127
SYNC PHASE (HD)
[F10]
FINE (HD)
Fine adjustment of the sync phase
prst, 0 to 1024
ALT/[F1] Adjusts the Y, B-Y, and R-Y output
levels simultaneously.
prst, 0.0 to 141.3%
MASTER LEVEL (D1)
[F7]
ALT/[F2]
Y LEVEL (D1)
Adjusts the Y output level.
prst, 0.0 to 141.3%
ALT/[F3]
B-Y LEVEL (D1)
Adjusts the B-Y output level.
prst, 0.0 to 141.3%
ALT/[F4] R-Y LEVEL (D1) Adjusts the R-Y output level.
prst, 0.0 to 141.3%
ALT/[F5] VIDEO LEVEL (D2) Adjusts the video level.
prst, 0.0 to 141.3%
ALT/[F6] CHROMA LEVEL (D2) Adjusts the chroma level.
prst, 0.0 to 141.3%
ALT/[F7] HUE (D2) Adjusts the hue.
prst, –30 to +30
ALT/[F8]
SETUP LEVEL (D1/D2)
Adjusts the setup level.
prst, 0 to +10.0
ALT/[F9] SYNC PHASE (SD) Adjusts the sync phase.
prst, –128 to +127
ALT/[F10] FINE (SD) Fine adjustment of the sync phase
prst, 0 to 1024
ÅIN --:--:--:-- ÅOUT --:--:--:--
PLAY LOCK
VIDEO
IN
SDI
CH.COND PF1
TCR 2FD F1
IN --:--:--:-- OUT --:--:--:--
00
Ó
00
µ
00
ß
00
ƒ
SERVO
REF
input
MASTER
(HD)
prst
Y
(HD)
prst
PB
(HD)
prst
PR
(HD)
prst
SETUP
(HD)
prst
H PHAS
(HD)
prst
FINE
(HD)
prst
REMAIN-T
L 113min