user manual

Chapter 4 Menu Settings 4-53
Chapter 4 Menu Settings
Inserting a new line
1 Use the cursor buttons to move the cursor to the
line that will be under the new line to be inserted.
To move the cursor using the numeric
buttons
With the cursor specifying Time, Mrk, IN, OUT or
the recording starting point section in the TELE
FILE menu display, enter the line number using
the numeric buttons. Then press the [F9]
(CUENUM POINT) button. The cursor will move
to the line specified by the numeric buttons.
Note
If the movement of the cursor (”) is not linked
with the cursor buttons, the cursor (”) will not
move when the cursor buttons are pressed.
To link the cursor (”) with the cursor
buttons
Press the center cursor button. Each press of the
button alternately links and unlinks the cursor (”).
2 Press the ENTRY button while pressing down the
SFT button.
A new line is inserted above the line where the
cursor (”) is located, and the current time code is
entered on the new line.
Moving a line
Press the cursor buttons to move the cursor to the Time
data of the line to be moved. Then press the + or –
button. Each press of the + button moves the line up,
while each press of the – button moves the line down.
Note
If you perform the procedure above while the cursor is
on any other data other than the Time data, only the
contents selected by the cursor will be moved. To
move the entire line, be sure that the cursor is placed
on the Time data.
Deleting a line
Press the cursor button to move the cursor to the line to
be deleted, and then press the [F5] (DEL POINT)
button while pressing down the SFT button. The line
is deleted and all proceeding lines move up by one.
Displaying other information saved to the
memory label
Press the [F8] (TAPE INFO) button. The TAPE
INFORMATION window appears, showing other
information concerning the videocassette.
To close the window
Press the [F8] (TAPE INFO) button again.
To change ID or ADMIN data
1 Press the ALT/[F3] (ATTRIB EDIT) buttons.
(Continued)
6 2,34
1
2
CUE
SCAN
CH.COND TELE FILE
TCR 00:00:00:00
COMMNT
EDIT
ENTRY
POINT
CHANGE
DATA
DEL
POINT
MARK PRO-
TECT
TAPE
INFO
CUENUM
POINT
WRITE/
EXIT
REC DATE[1998/02/10] Rest 50%
No. Time Mrk Tk Cut Scn
0 00:01:02:03 NG 1 0015 A01
1 --:--:--:-- KP 2 0015 A01
2 00:03:04:03 OK @ 3 0015 A01
3 00:04:05:03 OK 1 017~ A01
4 00:05:06:03 NG 1 B20
5 00:06:07:03 OK 2 B20
6 --:--:--:--
TITLE[NAGANO JUMP LARGE HILL]
TAPE INFORMATION
ID: 001234567 TITLE
ADMIN: Kanrisha
MODEL: HDW-700
SERIAL NUMBER:000123
WRITE PROTECT: ON
TAPE THREAD COUNT: 123
CUE POINT NUMBER: 5
CONTROL MODE: panel
SIZE: 1024 USED: 234