user manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Locations and Functions of Parts and Controls
- Chapter 3 Setting Up the VTR
- Chapter 4 Menu Settings
- 4-1 Registering and Storing Menu Settings
- 4-2 HOME Menu
- 4-2-1 Selecting the Output Signals(PB/EE)
- 4-2-2 Record Inhibit Mode (REC INH)
- 4-2-3 Selecting the Edit Mode and Edit Channel (ASSEMBLE or INS CUE)
- 4-2-4 Preread Settings (PRE READ)
- 4-2-5 Still-Picture Output (FREEZE)
- 4-2-6 Selecting the Capstan Servo Lock Mode (CAP LOCK)
- 4-2-7 Setting the Preroll Time (PREROLL TIME)
- 4-2-8 Selecting DMC Playback (DMC)
- 4-2-9 Recalling Edit Points (LAST EDIT)
- 4-3 TC Menu
- 4-3-1 Setting the Time Data (TIMER SEL/RESET/SET/HOLD)
- 4-3-2 Setting the Time Code Reader (TCR SEL)
- 4-3-3 Setting the Time Code Generator (TCG SOURCE/MODE)
- 4-3-4 Selecting the Time Code Running Mode (RUN MODE)
- 4-3-5 Selecting the Drop Frame Mode (DF/NDF)
- 4-3-6 Inserting VITC input source (VITC)
- 4-3-7 Selecting CTL Display Mode (TAPE TIMER)
- 4-3-8 Presetting Pull Down Time Code (PDPSET MENU)(when HKDV-507/507D is installed)
- 4-3-9 Presetting for Conversion From 24-frame Into 25-frame Time Code
- 4-3-10 Conversion of Time Code During Playback in 25F Mode (TC CONV)
- 4-3-11 Displaying the Pull Down Time Code (when HKDV-507/507D is installed)
- 4-3-12 Superimposition of Character Information (PD CHARA/CHARA SUPER/H-POS/V-POS)
- 4-3-13 Setting the VITC Insertion Line (VITC POS-1/POS-2)
- 4-3-14 Presetting for Conversion From 25-frame Into 24-frame Time Code
- 4-3-15 Conversion of Time Code During Playback in 24F Mode (TC CONV)
- 4-4 CUE Menu
- 4-5 PF1 Menu (Factory Settings)
- 4-6 PF2 Menu (Factory Settings)
- 4-7 SET UP Menu
- Chapter 5 Recording/Playback
- 5-1 Preparing for Recording
- 5-2 Recording
- 5-3 Preparing for Playback
- 5-3-1 Setting Switches and Menus
- 5-3-2 Adjusting the Audio Playback Level
- 5-3-3 Selecting the HD-SD Conversion Mode (when HKDV-501A is installed)
- 5-3-4 Selecting the Conversion Mode of the Effective Scanning Line Number
- 5-3-5 Improving the Vertical Resolution during Slow-Motion Playback (when HKDV-502 is installed)
- 5-4 Playback
- Chapter 6 Editing
- Appendix
- Maintenance
- Specifications
- Operation Information Display
- Error Messages and Warning Messages
- Glossary
- Menu List
- Items Related to the Hours Meter (H01~)
- Items Related to VTR Operations (001~)
- Items Related to Operation Panels (101~)
- Items Related to Remote Interface (201~)
- Items Related to Editing (301~)
- Items Related to Prerolling (401~)
- Items Related to Recording Protection (501~)
- Items Related to the Time Code (601~)
- Items Related to the Video Control (701~)
- Items Related to the Audio Control (801~)
- Items Related to Digital Processing (901~)
- Items Related to the Pull Down Control (A01~)
- Other Items (T01~)
- Index
- Table of Functions (Factory Default Settings)
Appendix A-25
Appendix
ItemItem number Settable range
The follwing items specifies the allocation of each channel
for the analog audio preset of the editor or remote controller
when the digital audio signals from the VTR is edited on an
editor (BVE-600, etc.) or remote controller with digital audio
edit preset control functions.
311 no definition
[analogch1]
analog ch 2
analog ch 1 + ch 2
Items 311 through 315 describe the analog audio edit preset
during editing mentioned on right.
Sets the channel-1 edit preset of the VTR to ON or OFF
according to the analog audio preset specified on an editor
or remote controller.
no definition: Not defined.
analog ch 1: As determined by analog channel 1 edit preset.
analog ch 2 : As determined by analog channel 2 edit
preset.
analog ch 1 + ch 2 : As determined by analog channel 1 or
analog channel 2 preset.
no definition
analog ch 1
[analogch2]
analog ch 1 + ch 2
Sets the channel-2 edit preset of the VTR to ON or OFF
according to the analog audio preset specified on an editor
or remote controller.
no definition: Not defined.
analog ch 1: As determined by analog channel 1 edit
preset.
analog ch 2: As determined by analog channel 2 edit
preset.
analog ch 1 + ch 2: As determined by analog channel 1 or
analog channel 2 preset.
Sets the channel-3 edit preset of the VTR to ON or OFF
according to the analog audio preset specified on an editor
or remote controller.
no definition: Not defined.
analog ch 1: As determined by analog channel 1 edit preset.
analog ch 2: As determined by analog channel 2 edit preset.
analog ch 1 + ch 2: As determined by analog channel 1 or
analog channel 2 preset.
[nodefinition]
analog ch 1
analog ch 2
analog ch 1 + ch 2
313
Sets the channel-4 edit preset of the VTR to ON or OFF
according to the analog audio preset specified on an editor
or remote controller.
no definition: Not defined.
analog ch 1: As determined by analog channel 1 edit preset.
analog ch 2: As determined by analog channel 2 edit preset.
analog ch 1 + ch 2 : As determined by analog channel 1 or
analog channel 2 preset.
[nodefinition]
analog ch 1
analog ch 2
analog ch 1 + ch 2
314 ANALOG AUDIO
EDIT PRESET
REPLACE FOR
CH 4
Sets the analog audio channel (longitudinal) edit preset of
the VTR to ON or OFF according to the analog audio preset
specified on an editor or remote controller.
no definition: Not defined.
analog ch 1: As determined by analog channel 1 edit preset.
analog ch 2: As determined by analog channel 2 edit preset.
analog ch 1 + ch 2: As determined by analog channel 1 or
analog ch 2 preset.
315 [nodefinition]
analog ch 1
analog ch 2
analog ch 1 + ch 2
ANALOG AUDIO
EDIT PRESET
REPLACE FOR
CUE
ANALOG AUDIO
EDIT PRESET
REPLACE FOR
CH 1
ANALOG AUDIO
EDIT PRESET
REPLACE FOR
CH 3
ANALOG AUDIO
EDIT PRESET
REPLACE FOR
CH 2
312
Function