user manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Locations and Functions of Parts and Controls
- Chapter 3 Setting Up the VTR
- Chapter 4 Menu Settings
- 4-1 Registering and Storing Menu Settings
- 4-2 HOME Menu
- 4-2-1 Selecting the Output Signals(PB/EE)
- 4-2-2 Record Inhibit Mode (REC INH)
- 4-2-3 Selecting the Edit Mode and Edit Channel (ASSEMBLE or INS CUE)
- 4-2-4 Preread Settings (PRE READ)
- 4-2-5 Still-Picture Output (FREEZE)
- 4-2-6 Selecting the Capstan Servo Lock Mode (CAP LOCK)
- 4-2-7 Setting the Preroll Time (PREROLL TIME)
- 4-2-8 Selecting DMC Playback (DMC)
- 4-2-9 Recalling Edit Points (LAST EDIT)
- 4-3 TC Menu
- 4-3-1 Setting the Time Data (TIMER SEL/RESET/SET/HOLD)
- 4-3-2 Setting the Time Code Reader (TCR SEL)
- 4-3-3 Setting the Time Code Generator (TCG SOURCE/MODE)
- 4-3-4 Selecting the Time Code Running Mode (RUN MODE)
- 4-3-5 Selecting the Drop Frame Mode (DF/NDF)
- 4-3-6 Inserting VITC input source (VITC)
- 4-3-7 Selecting CTL Display Mode (TAPE TIMER)
- 4-3-8 Presetting Pull Down Time Code (PDPSET MENU)(when HKDV-507/507D is installed)
- 4-3-9 Presetting for Conversion From 24-frame Into 25-frame Time Code
- 4-3-10 Conversion of Time Code During Playback in 25F Mode (TC CONV)
- 4-3-11 Displaying the Pull Down Time Code (when HKDV-507/507D is installed)
- 4-3-12 Superimposition of Character Information (PD CHARA/CHARA SUPER/H-POS/V-POS)
- 4-3-13 Setting the VITC Insertion Line (VITC POS-1/POS-2)
- 4-3-14 Presetting for Conversion From 25-frame Into 24-frame Time Code
- 4-3-15 Conversion of Time Code During Playback in 24F Mode (TC CONV)
- 4-4 CUE Menu
- 4-5 PF1 Menu (Factory Settings)
- 4-6 PF2 Menu (Factory Settings)
- 4-7 SET UP Menu
- Chapter 5 Recording/Playback
- 5-1 Preparing for Recording
- 5-2 Recording
- 5-3 Preparing for Playback
- 5-3-1 Setting Switches and Menus
- 5-3-2 Adjusting the Audio Playback Level
- 5-3-3 Selecting the HD-SD Conversion Mode (when HKDV-501A is installed)
- 5-3-4 Selecting the Conversion Mode of the Effective Scanning Line Number
- 5-3-5 Improving the Vertical Resolution during Slow-Motion Playback (when HKDV-502 is installed)
- 5-4 Playback
- Chapter 6 Editing
- Appendix
- Maintenance
- Specifications
- Operation Information Display
- Error Messages and Warning Messages
- Glossary
- Menu List
- Items Related to the Hours Meter (H01~)
- Items Related to VTR Operations (001~)
- Items Related to Operation Panels (101~)
- Items Related to Remote Interface (201~)
- Items Related to Editing (301~)
- Items Related to Prerolling (401~)
- Items Related to Recording Protection (501~)
- Items Related to the Time Code (601~)
- Items Related to the Video Control (701~)
- Items Related to the Audio Control (801~)
- Items Related to Digital Processing (901~)
- Items Related to the Pull Down Control (A01~)
- Other Items (T01~)
- Index
- Table of Functions (Factory Default Settings)
Menu List
A-22 Appendix
Appendix
FunctionItem Settable rangeItem number
120 WARNING
DISPLAY
[off]
on
Selects whether warning messages should be displayed in
the lower part of the timecode display for the HOME menu,
the TC menu, the PF1 menu, and the PF2 menu.
off: Do not display warning messages.
on: Display warning messages.
Sub items
121 INFORMATION
DISPLAY
Selects items to be displayed in the operation information.
SYSTEM
FREQUENCY
[off]
diff
ever
off: Does not display the field frequency of both the unit and
the tape.
diff: Displays the field frequency of the unit and the tape only
when they do not match.
ever: Always displays the field frequency of the unit and the
tape.
VIDEO INT SG [off]
on
off: Does not display the type of the test signal generated by
the internal video test signal generator.
on: Display the type of the test signal generated by the
internal video test signal generator.
AUDIO INT SG [off]
on
off: Does not display the operating status of the internal
audio test signal generator.
on: Displays the operating status of the internal audio test
signal generator.
122
MULTI CUE
CLEAR by inject
[on]
off
Selects whether to erase cue point data in multi-cue mode
when a cassette is inserted.
on : Erase cue point data.
off : Do not erase cue point data.
ACTIVE LINE (HD)
[off]
diff
ever
off: Does not display the effective scanning line number to
be input or played back, and to be output.
diff: Displays the effective scanning line number to be input
and to output only when they do not match.
ever: Always displays the effective scanning line number to
be input and output.
123
Tele-File
CONTROL MODE
[controlpanel]
RS-232C
Selects the device to be used for TELE FILE menu
operations.
control panel: The control panel of the VTR is used.
RS-232C: A personal computer connected to the RS-232C
connector of the VTR is used.
124 Tele-File MENU
auto popup
[off]
on
Specifies whether or not the TELE FILE menu appears
automatically when a cassette with a memory label is
inserted.
off: The TELE FILE menu does not appear.
on: The TELE FILE menu appears.
125
Tele-File THREAD
COUNTER clear
mode
[notclear]
when format
Specifies whether or not the thread counter is reset when a
memory label is formatted.
not clear: The thread counter is not reset.
when format: The thread counter is reset.
EOS DISPLAY [off]
on
off: Does not display EOS.
on: Displays EOS.
META DATA [off]
on
Selects whether the reception setting (bank name) for the
meta data multiplexed in the HD SDI packet is displayed or
not.
off: The bank name is not displayed.
on: The bank name is displayed.
Notes
• No warning messages are displayed for the CUE menu, so
check by viewing a menu other than the CUE menu.
• If LOST LOCK occurs during playback or recording, a
LOST LOCK warning message is always displayed.