user manual

Chapter 4 Menu Settings 4-59
Chapter 4 Menu Settings
PF2 menu display
PF2 menu (factory settings)
4-6 PF2 Menu (Factory Settings)
The PF2 menu is used to register frequently used menu
items.
When shipped from the factory, the PF2 menu contains
the adjustment menu for audio signals. If you later use
the PF2 menu to register items from other menus, you
can restore the PF2 menu to its original factory settings
by recalling SETUP BANK F from the VTR memory
banks.
For details on registration methods, see Section 4-1-3,
“Registering Items to the PF1/2 Menus” on page 4-3, and
on restoring factory-set menu items, see Section 4-1-4,
“VTR Memory Bank Function” on page 4-4.
To activate the PF2 menu screen
Press the PF2 button.
ÅIN --:--:--:-- ÅOUT --:--:--:--
PLAY LOCK
Å-IN
CH1
AES/EBU
CH.COND PF2
TCR 2FD F1
IN --:--:--:-- OUT --:--:--:--
00 Ó 00 µ 00 ß 00 ƒ
Å-IN
CH2
AES/EBU
Å-IN
CH3
AES/EBU
Å-IN
CH4
AES/EBU
EMPHÅ-
SIS
off
MON-L
SEL
1____
MON-R
SEL
_2___
REMAIN-T
L 113min
Button Indication Function Settings
[F1] A-IN CH1 Selects the audio input signal for audio channel 1. SDI, AES/EBU, analg, [SDTI]
Note
When the dubbing signal input to the
SDTI (OPTION) IN connector is
selected for the input video signal, the
SDTI signal input to the SDTI (OPTION)
IN connector is automatically selected
for the input audio signal as well. The
setting can not be changed.
[F2] A-IN CH2 Selects the audio input signal for audio channel 2.
[F3] A-IN CH3 Selects the audio input signal for audio channel 3.
[F4] A-IN CH4 Selects the audio input signal for audio channel 4.
[F7] EMPHASIS Sets the emphasis. off, on
[F9] MON-L SEL Selects the monitor output signal for channel L. Combination of 1, 2, 3, 4, 5
[F10] MON-R SEL Selects the monitor output signal for channel R. Combination of 1, 2, 3, 4, 5