DST-HD100A.
DST-HD100A.book Page 2 Saturday, September 17, 2005 5:36 AM Safety Information Please follow the precautions below to ensure the safety of your receiver is not compromised in any way. Never push objects of any kind into the receiver as this could result in a fire or electric shock. Never spill liquid of any kind onto the receiver. If any liquid or solid object does get into the receiver, switch off immediately and have it checked by qualified personnel.
DST-HD100A.book Page 3 Saturday, September 17, 2005 5:36 AM Table of contents Thank you for choosing this Sony product. Before operating the receiver, please read this instruction manual thoroughly and retain it for future reference.
DST-HD100A.
DST-HD100A.book Page 5 Saturday, September 17, 2005 5:36 AM Overview of the remote control 1 TV 1 2 3 4 / / qs qd qf qg 1 2 3 4 5 6 7 8 9 5 6 7 0 Note:This button will only work once you have configured the remote control to operate your brand of TV (refer to page 21). 2 qj 3 8 9 0 LIST qk RETURN MENU qa Video Input button t Press to select signals from equipment connected to the TV set.
DST-HD100A.book Page 6 Saturday, September 17, 2005 5:36 AM Overview of the receiver Front View 1 (Power) indicator Remote control sensor Channel information Control pad V (PROG+), v (PROG-), B, b and OK buttons MENU OK 1 (Power) button MENU button Note:When the receiver is turned on, it takes a few seconds for the system to warm up. During this interval, ‘DST-HD500’ will be displayed in the front panel. Please wait until the image shows up on the screen.
DST-HD100A.book Page 7 Saturday, September 17, 2005 5:36 AM Getting Started Connecting the receiver to a TV/display screen Note:Before connecting, ensure all equipment is disconnected from the mains supply. Connecting to an HD TV/display screen via HDMI Rear of TV/display screen (with HDMI input) RF cable (supplied) RF IN To mains AC Cord (supplied) HDMI cable RF IN Y DIGITAL CVBS ANALOG L L R R Pb COAX. Pr RF OUT OPTICAL S-VIDEO ANT.
DST-HD100A.book Page 8 Saturday, September 17, 2005 5:36 AM Getting Started Connecting to an HD TV/display screen via Component output Rear of TV/display screen RF cable (supplied) HD IN Y RF IN Video jack (not required) Pb Pr L R Y/Pb/Pr cable (supplied) To mains AV cable (supplied) AC Cord (supplied) Video jack (not required) RF IN Y DIGITAL CVBS ANALOG L L R R Pb COAX. Pr RF OUT OPTICAL S-VIDEO ANT.
DST-HD100A.book Page 9 Saturday, September 17, 2005 5:36 AM Getting Started Connecting to an SD TV/display screen via S-Video Rear of TV/display screen RF cable (supplied) RF IN Video jack (not required) S-VIDEO AUDIO L R S-Video cable (not supplied) To mains AC Cord (supplied) AV cable (supplied) Video jack (not required) RF IN Y DIGITAL CVBS ANALOG L L R R Pb COAX. Pr RF OUT OPTICAL S-VIDEO ANT.
DST-HD100A.book Page 10 Saturday, September 17, 2005 5:36 AM Getting Started Connecting to an SD TV/display screen via Composite Video Rear of TV/display screen RF cable (supplied) RF IN AV IN V L R AV cable (supplied) To mains AC Cord (supplied) RF IN Y DIGITAL CVBS ANALOG L L R R Pb COAX. Pr RF OUT OPTICAL S-VIDEO ANT. 10 VIDEO OUTPUT RS-232 AUDIO OUTPUT 1 Connect your aerial cable to the socket labelled RF IN on the rear of the receiver.
DST-HD100A.book Page 11 Saturday, September 17, 2005 5:36 AM Getting Started Inserting batteries into the remote control 1 2 Push and lift up the release clip to remove the battery cover. Insert the supplied batteries as indicated inside the battery compartment. Easy Setup procedure Easy Setup screen Easy Setup Time Setup Full Scan Quick Scan VIC 1 Press the 1 (Power) button on the front of the receiver. When the receiver is switched on for the first time, the ‘Easy Setup’ screen is displayed.
DST-HD100A.book Page 12 Saturday, September 17, 2005 5:36 AM Using the menu system General operation All the menus of this receiver are accessed by pressing the MENU button on the remote control or the front panel. 1 Use the following buttons to operate the menu: - Press the V or v button to highlight the required option. - Press the OK or b button to enter the option. - Press the V, v, B and b buttons to alter settings.
DST-HD100A.book Page 13 Saturday, September 17, 2005 5:36 AM Using the menu system Install menu The Install menu allows you to tune in new channels automatically or manually, and set a parental rating for programs. 1 Press the MENU button to display the menu system. Install menu 2 Install Searches all available channels, but takes a longer time. Confirm : symbol. Press the b or OK Full Scan All the available channels were captured and stored when the receiver was first installed.
DST-HD100A.book Page 14 Saturday, September 17, 2005 5:36 AM Using the menu system Install Quick Scan Manual Scan Program Edit Favorite Preset Parental Control Sets a parental rating and changes password. Select : Confirm : BACK : EXIT : Parental Control This option allows you to set a parental guidance level. Programs that exceed the set level can only be viewed after entering the correct password. With the Parental Control option highlighted, press the b or OK button.
DST-HD100A.book Page 15 Saturday, September 17, 2005 5:36 AM Using the menu system Setup menu The Setup menu allows you change various settings. Setup menu 1 Press the MENU button to display the menu system. 2 Press the v button to highlight the symbol. Press the b or OK button to display the Setup menu. Setup Video / Audio Setup Time Setup Restore to Default S/W Update Information Select : Confirm : Video/Audio Setup This option enables you to enjoy video and audio in various environments.
DST-HD100A.book Page 16 Saturday, September 17, 2005 5:36 AM Using the menu system Time Setup This option allows you to set the time zone in which you are using the receiver. This will ensure that the time displayed on the i-Plate is correct. With the Time Setup option highlighted, press the b or OK button to adjust. Press the V or v buttons to highlight the required setting. Press the OK button to confirm. Restore to Default This option allows you to reset all the settings to factory default.
DST-HD100A.book Page 17 Saturday, September 17, 2005 5:36 AM Other Features Teletext If the broadcast program contains teletext, the icon is displayed on the i-Plate display (see below). Press the button to display the teletext. You can now use the teletext service in the same way as if using a traditional analogue TV. Picture In Picture (PIP) This feature allows you to view a different sub-channel in a window and also access multiview services (when available from broadcaster, e.
DST-HD100A.book Page 18 Saturday, September 17, 2005 5:36 AM Additional Information Connecting a VCR/DVD recorder Note: Before connecting, ensure all equipment is disconnected from the mains supply. Connecting to an HD VCR/DVD recorder RF IN Y DIGITAL CVBS ANALOG L L R R Pb COAX. Pr RF OUT OPTICAL S-VIDEO ANT.
DST-HD100A.book Page 19 Saturday, September 17, 2005 5:36 AM Additional Information Connecting to a Composite VCR/DVD recorder RF IN Y DIGITAL CVBS ANALOG L L R R Pb COAX. Pr RF OUT OPTICAL S-VIDEO ANT.
DST-HD100A.book Page 20 Saturday, September 17, 2005 5:36 AM Additional Information Connecting a Hi-Fi, Home Theatre, etc. Notes on connecting Hi-Fi equipment: This receiver can be connected to your Hi-Fi using either a digital optical cable or an audio cable (stereo/mono). Before connecting, ensure all equipment is disconnected from the mains supply. Connecting to a Hi-Fi, Home Theatre, etc. via Optical output or Coaxial output RF IN Y DIGITAL CVBS ANALOG L L R R Pb COAX.
DST-HD100A.book Page 21 Saturday, September 17, 2005 5:36 AM Additional Information Using the remote control to operate other TVs TV l/1 button TV / / 1 2 3 4 5 6 7 8 9 0 1 Find the three-digit code for your brand of TV from the list below. 2 Whilst holding down the TV l/1 button on the remote control, enter the three-digit code using the Numbered buttons. 3 Press the OK button to store, then release the TV l/1 button.
DST-HD100A.
DST-HD100A.book Page 23 Saturday, September 17, 2005 5:36 AM Additional Information Channels Available (as of July 2004) For updated information, please refer to www.dba.org.au or contact you local Sony service centre. City Identifier Channel and Middle Frequency Transmitter Location Start Date Adelaide Digital 7 Digital 9 Digital 10 Digital ABC Digital SBS VHF 6 - 177.5MHz VHF 8 - 191.625MHz VHF 11 - 219.5MHz VHF 12 - 226.5MHz UHF 33 - 564.
DST-HD100A.book Page 24 Saturday, September 17, 2005 5:36 AM Additional Information Troubleshooting Problem Solution (1) The receiver front panel power indicator doesn’t (a) Check the mains lead and make sure it is light up, and no message on the front panel. connected to a stable power outlet. (b) Check if the set top box is in ‘Standby’ mode by pressing the I/1 (Standby) button on the remote control.
DST-HD100A.
DST-HD100A.
DST-HD100A.
DST-HD100A.
