User's Guide / Troubleshooting
Table Of Contents
- IMPORTANT SAFEGUARDS
- Read this first
- Notes on using your camera
- Before your operation
- Using the shooting functions
- Using the viewing functions
- Using the menu
- Using your computer
- Enjoying your computer
- Connecting the camera and your computer
- Copying images to your computer
- Image file storage destinations and file names
- Copying images stored on a computer to amemory card and viewing the images
- Using the software (supplied)
- Installing the software
- Using the “Picture Motion Browser”
- Using the “Image Data Converter SR”
- Using the “Image Data Lightbox SR”
- Using the “Remote Camera Control”
- Printing images
- Troubleshooting
- Others
- Index
89
Using the viewing functions
Viewing images on a TV screen
You can view images on a TV screen by connecting the camera to a TV.
Turn off both your camera and the TV before connecting the camera and the TV.
1 Connect the camera to the TV.
2 Turn on the TV and switch the input.
• See also the operating instructions supplied with the TV.
3 Turn on the camera, and press (Playback).
Images shot with the camera appear on the TV screen.
Select the desired image with b/B on the multi-selector.
• When using your camera abroad, it may be necessary to switch the video signal output to match that
of your TV system (page 121).
• The LCD monitor on the rear of the camera does not turned on.
• The quality of images displayed on a TV connected with a video cable is lower for different systems,
compared to images displayed on an HDTV connected with an HDMI cable or on a PC monitor.
1 To video input
jack
Video cable
2 To the VIDEO
OUT terminal
Multi-selector
(Playback) button