User's Guide / Troubleshooting
Table Of Contents
- IMPORTANT SAFEGUARDS
- Read this first
- Notes on using your camera
- Before your operation
- Using the shooting functions
- Using the viewing functions
- Using the menu
- Using your computer
- Enjoying your computer
- Connecting the camera and your computer
- Copying images to your computer
- Image file storage destinations and file names
- Copying images stored on a computer to amemory card and viewing the images
- Using the software (supplied)
- Installing the software
- Using the “Picture Motion Browser”
- Using the “Image Data Converter SR”
- Using the “Image Data Lightbox SR”
- Using the “Remote Camera Control”
- Printing images
- Troubleshooting
- Others
- Index
87
Using the viewing functions
1 Display the image you want to enlarge, then press the (Enlarge) button.
The center of the image is enlarged.
2 Scale up or down the image with the rear control dial.
3 Select the portion you want to enlarge with v/V/b/B on the multi-selector.
• Each time you press the center of the multi-selector, the screen changes between the enlarged screen
and the whole screen.
• You can select an image with the front control dial.
4 Press the (Enlarge) or (Playback) button so that enlarged playback is canceled and the
screen returns to the screen that was displayed before enlarging.
The scaling range is as follows.
Image size Scaling range
L Approx. ×1.1 – ×13
M Approx. ×1.1 – ×10
S Approx. ×1.1 – ×6.7
The portion to be
enlarged if the
center is pressed
The map of the enlarged portion