User's Guide / Troubleshooting
Table Of Contents
- IMPORTANT SAFEGUARDS
- Read this first
- Notes on using your camera
- Before your operation
- Using the shooting functions
- Using the viewing functions
- Using the menu
- Using your computer
- Enjoying your computer
- Connecting the camera and your computer
- Copying images to your computer
- Image file storage destinations and file names
- Copying images stored on a computer to amemory card and viewing the images
- Using the software (supplied)
- Installing the software
- Using the “Picture Motion Browser”
- Using the “Image Data Converter SR”
- Using the “Image Data Lightbox SR”
- Using the “Remote Camera Control”
- Printing images
- Troubleshooting
- Others
- Index
73
Using the shooting functions
Flash
This section explains the various shooting functions with the flash.
If the built-in flash is pulled up, the flash fires automatically when the surroundings are dark in
auto adjustment or Scene Selection mode. You can intentionally change the flash mode.
1 Press the Fn (Function) button to display the Quick Navi screen (page 30).
• When the enlarged display screen is used (page 23), you cannot display the Quick Navi screen. In this
case, set up from the menu.
2 Select a Flash item with the multi-selector.
3 Select the desired mode with the front or rear control dial.
• The flash indicator is displayed only when the flash is pulled up.
• After selecting the flash item in step 2, if you press the center of the multi-selector, the screen switches
to the Exclusive disp screen. On this screen, select the desired mode with v/V on the multi-selector, then
press the center.
• You can also select the flash mode from the Recording menu (page 99).
( : The default setting)
Selecting the flash mode
(Autoflash)
Fires if it is dark or against light.
• This is not selectable when the mode dial is set to P, A, S, or M.
(Fill-flash)
Fires whenever the built-in flash is pulled up.
Multi-selector
Fn (Function) button
Front control dial
Rear control dial