User's Guide / Troubleshooting
Table Of Contents
- IMPORTANT SAFEGUARDS
- Read this first
- Notes on using your camera
- Before your operation
- Using the shooting functions
- Using the viewing functions
- Using the menu
- Using your computer
- Enjoying your computer
- Connecting the camera and your computer
- Copying images to your computer
- Image file storage destinations and file names
- Copying images stored on a computer to amemory card and viewing the images
- Using the software (supplied)
- Installing the software
- Using the “Picture Motion Browser”
- Using the “Image Data Converter SR”
- Using the “Image Data Lightbox SR”
- Using the “Remote Camera Control”
- Printing images
- Troubleshooting
- Others
- Index
55
Using the shooting functions
Drive mode
You can use continuous shooting, self-timer, bracket, and shooting using the Remote
Commander, with the DRIVE button.
1 Press DRIVE to display the drive mode screen.
2 Select the desired mode with v/V on the multi-selector, then select the
desired setting with b/B on the multi-selector.
3 Press the center of the multi-selector to turn off the screen.
( : The default setting)
• You can substitute the Fn (Function) button for the DRIVE button (page 30).
Single-shot adv.
• Also used for canceling other drive modes.
Continuous adv. (page 56)
Self-timer (page 57)
Bracket: Cont. (page 57)
Bracket: Single (page 58)
WB bracket (page 59)
DRO adv. bracket (page 59)
Remote Commander (page 60)
DRIVE button
Multi-selector
Select the mode
Select the setting