User's Guide / Troubleshooting
Table Of Contents
- IMPORTANT SAFEGUARDS
- Read this first
- Notes on using your camera
- Before your operation
- Using the shooting functions
- Using the viewing functions
- Using the menu
- Using your computer
- Enjoying your computer
- Connecting the camera and your computer
- Copying images to your computer
- Image file storage destinations and file names
- Copying images stored on a computer to amemory card and viewing the images
- Using the software (supplied)
- Installing the software
- Using the “Picture Motion Browser”
- Using the “Image Data Converter SR”
- Using the “Image Data Lightbox SR”
- Using the “Remote Camera Control”
- Printing images
- Troubleshooting
- Others
- Index
41
Using the shooting functions
Manual exposure
You can manually adjust the shutter speed and aperture values.
This mode is useful when you maintain the setting of the shutter speed and the aperture value
or when you use an exposure meter.
1 Set the mode dial to M.
2 Select a shutter speed using the front control dial and an aperture value using the rear control
dial.
• “BULB” (Bulb shooting) is indicated next to “30” (page 43).
• In the manual exposure mode, even when [ISO sensitivity] (page 64) is set to [AUTO], it is fixed to ISO
200.
• You can exchange their functions of the front and rear control dials with [Ctrl dial setup] in the Custom
menu (page 107).
• When the flash is pulled up, the flash fires regardless of the amount of ambient light (page 73).
• The (Camera-shake warning) indicator does not appear in the manual exposure mode.
Shooting with manual exposure mode – M
Front control dial
Mode dial
Rear control dial
Front control
dial
Rear control
dial