User's Guide / Troubleshooting
Table Of Contents
- IMPORTANT SAFEGUARDS
- Read this first
- Notes on using your camera
- Before your operation
- Using the shooting functions
- Using the viewing functions
- Using the menu
- Using your computer
- Enjoying your computer
- Connecting the camera and your computer
- Copying images to your computer
- Image file storage destinations and file names
- Copying images stored on a computer to amemory card and viewing the images
- Using the software (supplied)
- Installing the software
- Using the “Picture Motion Browser”
- Using the “Image Data Converter SR”
- Using the “Image Data Lightbox SR”
- Using the “Remote Camera Control”
- Printing images
- Troubleshooting
- Others
- Index
164
On the battery charger
On the battery charger
• Do not charge any battery pack other than the
“InfoLITHIUM” M series battery pack in the
battery charger (supplied) with your camera.
Batteries other than the specified kind may leak,
overheat, or explode if you attempt to charge
them, posing a risk of injury from electrocution
and burns.
• Remove the charged battery pack from the
battery charger. If you leave the charged battery
pack in the charger, battery life may be
decreased.
• When the CHARGE lamp flashes, this may
indicate a battery error or that a battery pack
other than the specified type have been inserted.
Check that the battery pack is the specified type.
If the battery pack is the specified type, remove
the battery pack, replace it with new one or
another one and check if the battery charger
operates correctly. If the battery charger
operates correctly, a battery error may have
occurred.
• If the battery charger is dirty, charging may not
be performed successfully. Clean the battery
charger with dry cloth, etc.