User's Guide / Troubleshooting
Table Of Contents
- IMPORTANT SAFEGUARDS
- Read this first
- Notes on using your camera
- Before your operation
- Using the shooting functions
- Using the viewing functions
- Using the menu
- Using your computer
- Enjoying your computer
- Connecting the camera and your computer
- Copying images to your computer
- Image file storage destinations and file names
- Copying images stored on a computer to amemory card and viewing the images
- Using the software (supplied)
- Installing the software
- Using the “Picture Motion Browser”
- Using the “Image Data Converter SR”
- Using the “Image Data Lightbox SR”
- Using the “Remote Camera Control”
- Printing images
- Troubleshooting
- Others
- Index
142
Using the “Remote Camera Control”
When the camera is connected to a PC, you
can use “Remote Camera Control” to take
pictures or change settings on the camera
from the PC.
You can also save recorded images directly
on the PC.
• For details, refer to the Help.
To start the Help from the Start menu, click
[Start]
t [All Programs] t [Sony Image
Data Suite]
t [Help] t [Remote Camera
Control].
x Windows
To start up
Click [Start] t [All Programs] t [Sony
Image Data Suite]
t [Remote Camera
Control].
To exit
Click the button on the upper-right of
the screen.
x Macintosh
To start up
Double-click [Remote Camera Control] in
the [Sony Image Data Suite] folder from the
[Application] folder.
To exit
Click [Quit Remote Camera Control] from
the [Remote Camera Control] menu.
1 Press MENU to display the menu.
2 Select (Setup) t [2] t [USB
connection] with the multi-
selector (page 32).
3 Select [Remote PC] with v/V, then
press the center of the multi-
selector.
The USB mode is set to [Remote PC].
4 Turn the camera off.
Overview of “Remote Camera
Control”
Starting up or exiting “Remote
Camera Control”
Setting the camera
Multi-
selector
MENU
button