User's Guide / Troubleshooting
Table Of Contents
- IMPORTANT SAFEGUARDS
- Read this first
- Notes on using your camera
- Before your operation
- Using the shooting functions
- Using the viewing functions
- Using the menu
- Using your computer
- Enjoying your computer
- Connecting the camera and your computer
- Copying images to your computer
- Image file storage destinations and file names
- Copying images stored on a computer to amemory card and viewing the images
- Using the software (supplied)
- Installing the software
- Using the “Picture Motion Browser”
- Using the “Image Data Converter SR”
- Using the “Image Data Lightbox SR”
- Using the “Remote Camera Control”
- Printing images
- Troubleshooting
- Others
- Index
129
Using your computer
Connecting the camera and your computer
You can copy images from the camera to
your computer as follows.
For directly inserting the memory card
in a computer
Remove the memory card from the camera
and insert it in the computer and copy the
images.
For connecting the camera with the
memory card inserted to a computer
using the USB connection
Follow the procedure on pages 130 to 132
to copy images.
• Check that [USB connection] in the Setup
menu is set to [Mass Storage] (page 124).
1 Insert a memory card with
recorded images into the camera.
2 Insert the sufficiently charged
battery pack in the camera, or
connect the camera to a wall
outlet (wall socket) with the AC
Adaptor/charger (not supplied).
• When you copy images to your computer
using insufficient battery pack, copying may
fail or image data may become corrupted if
the battery pack shut down too soon.
3 Turn on the camera and the
computer.
4 Connect the camera and your
computer.
USB cable
2 To the USB
terminal
1 To the USB
terminal