User's Guide / Troubleshooting
Table Of Contents
- IMPORTANT SAFEGUARDS
- Read this first
- Notes on using your camera
- Before your operation
- Using the shooting functions
- Using the viewing functions
- Using the menu
- Using your computer
- Enjoying your computer
- Connecting the camera and your computer
- Copying images to your computer
- Image file storage destinations and file names
- Copying images stored on a computer to amemory card and viewing the images
- Using the software (supplied)
- Installing the software
- Using the “Picture Motion Browser”
- Using the “Image Data Converter SR”
- Using the “Image Data Lightbox SR”
- Using the “Remote Camera Control”
- Printing images
- Troubleshooting
- Others
- Index
100
For details on the operation
1
page 32
You can select the amount of light when [Flash control] is set to [Manual flash].
• Under the condition in meter at ISO 100
For details, see page 75.
You can select the upper limit of an ISO AUTO value when the mode dial is set to P, A, or S,
and ISO is set to [AUTO].
You can select the lower limit of an ISO AUTO value when the mode dial is set to P, A, or S,
and ISO is set to [AUTO].
Power ratio
1/1
Guide number approx. 12
1/2
Guide number approx. 8.4
1/4
Guide number approx. 6
1/8
Guide number approx. 4.2
1/16
Guide number approx. 3
Flash compens.
ISO Auto max.
1600
Automatically adjusts ISO with the selected value set to the
upper limit.
800
400
ISO Auto min.
400
Automatically adjusts ISO with the selected value set to the
lower limit.
200