Operating Instructions

70
Choosing images to
print
– Print (DPOF) mark
Mode selector:
You can designate certain images to be
printed.
This mark is convenient when you want to
print images at a shop that conforms with
the DPOF (Digital Print Order Format)
standard.
• You cannot mark movies (MPEG movie) or
images recorded in Clip Motion mode.
• In E-Mail mode, the print (DPOF) mark is
marked on the normal size image that was
recorded at the same time.
• When you mark images shot in Multi Burst
mode, all the images are printed on one sheet
divided into 16 panels.
On the single screen
a Set the mode selector to .
b Display the image you want to
print with b/B.
c Press MENU.
The menu appears.
d Select [DPOF] with b/B, then
press z.
The mark is indicated on this
image.
e To mark other images, display
the image you want to mark
with b/B, then press z.
To delete the mark
In Step 4 or 5, press z again. The
mark disappears.
On the Index (nine-image)
screen
a Set the mode selector to
and press the zoom W (index)
button once to switch to the
Index (nine-image) screen.
b Press MENU.
The menu appears.
c Select [DPOF] with B, then
press z.
d Select [Select] with b/B, then
press z.
• You cannot mark using the [All In Folder]
option.
e Select the images you want to
print with v/V/b/B, then press
z.
The green mark is indicated on the
selected image.
f To mark other images, repeat
Step 5 for each of them.
Mode selector
Zoom buttons
Control button
MENU
VGA
101
2/9
DPOF
Exit
BACK/NEXTOK
TO NEXT
MENU
MOVESELECT