Operation Manual

49
7 Tap [Yes].
The documents are transferred to just below the
layer in the specified destination folder.
Note
 If a document of the same name already exists in
the destination folder, it will be overwritten.
Tip
 Alternatively, press the (Menu) button, then tap
[Send], while the document is displayed.
Sending multiple documents
simultaneously
1 Connect to the Wi-Fi network.
2 Press the (Home) button  tap [Documents].
3 Tap [Folders] and select [Storage] in folder path
view  select a network, then tap the folder that
you want to transfer.
4 Press the (Menu) button  tap [Send].
Boxes appear next to the thumbnails or list
entries.
 Check box Off
 Check box On (Target destination)
 Folder path view
 [Select All]
 [Done]
 [Cancel]
5 Tap to check the document(s) to send.
Tap [Select All] to check all check boxes.
6 Tap [Done].
The destination screen is displayed.
7 Tap the destination and check the check box.
To select all destinations, tap [Select All].
8 Tap [OK].
The confirmation screen is displayed.
9 Tap [Yes].
Returning the document
You can return a document when the Digital Paper
device can identify the sender from the name of the
document (page 48). The returned document will be
stored in the network drive. When the sender
synchronizes with the network drive, the document
will be returned to the sender.
1 Connect to the Wi-Fi network.
2 Press the (Home) button  tap [Documents].
3 Tap [All Documents] or [Folders].
4 Tap and hold the document that you want to
return  tap [Reply] in the option menu.
The confirmation screen is displayed.
5 Tap [Yes].