4-208-677-12 (1) For your safety Digital Photo Frame Let’s get the photo frame ready Let’s view an image DPF-E710 Try using various functions Troubleshooting Additional information Operating Instructions Before operating this unit, please read this manual thoroughly and retain it for future reference.
WARNING To reduce fire or shock hazard, do not expose the unit to rain or moisture. Do not expose the batteries to excessive heat such as sunshine, fire or the like. CAUTION Replace the battery with the specified type only. Otherwise, fire or injury may result. Dispose of used batteries according to the instructions. For the Customer in Europe This product has been tested and found compliant with the limits set out in the EMC Directive for using connection cables shorter than 3 meters (9.8 feet).
Notice for users Read this before using Program © 2010 Sony Corporation Documentation © 2010 Sony Corporation Notes on playback All rights reserved. This manual or the software described herein, in whole or in part, may not be reproduced, translated or reduced to any machine readable form without prior written approval from Sony Corporation.
Table of Contents Read this before using ......................................................................................3 For your safety Checking included items ...................................................................................6 Identifying the parts ..........................................................................................7 Digital photo frame .................................................................................................... 7 Remote control .....
Troubleshooting If an error message appears .......................................................................... 21 If trouble occurs ............................................................................................. 21 Additional information Precautions .................................................................................................... 23 Installation ...............................................................................................................
For your safety Checking included items Make sure that the following items are included. Digital photo frame (1) Stand (1) Attaching to the screw hole (.page 9) , Removing the protective sheet (. page 9) Remote control (1) , AC adaptor (1) Connecting to the AC power source (.page 11) , Exchangeable panels (3)* Operating Instructions (this manual) (1) CD-ROM (Digital Photo Frame Handbook) (1) Warranty (1) * One of the 3 panels is already attached to the digital photo frame.
Identifying the parts x Digital photo frame Front For your safety LCD screen Remote sensor Rear BACK button ENTER button Direction (v/V) buttons Direction (B/b) buttons MENU button VIEW MODE button (.page 14) 1 (on/standby) button Standby indicator USB mini B connector (.page 20) Memory card slot (.page 13) Access lamp Holes for hanging unit on the wall DC IN 5 V jack (.page 11) Stand (.
x Remote control VIEW MODE buttons 1 (on/standby) button SLIDE-SHOW ( ) button CLOCK ( ) button SINGLE button INDEX ( ) button MENU button Zoom in ( ) button Direction (B/b/v/V) buttons BACK button ENTER ( ) button Zoom out ( ) button SELECT DEVICE button ROTATE ( ) button IMPORT ( ) button DELETE ( ) button About descriptions in this manual The operations described in this manual are based on remote control operation.
Let’s get the photo frame ready P Notes Remote control Pull out the protective sheet before use as shown in the figure. Protective sheet • If the remote control stops working: Replace the battery (CR2025 lithium battery) with a new one. • When the lithium battery becomes weak, the operating distance of the remote control may shorten, or the remote control may not function properly. In this case, replace the battery with a Sony CR2025 lithium battery.
PNotes • Use screws suitable for the quality of the material of the wall. The screws may be damaged, depending on the type of material used in the wall. Set the screws in a pillar or stud in the wall. • When you want to re-insert the memory card, remove the photo frame from the wall, then eject and re-insert the memory card while the photo frame is placed on a stable surface. • Remove the stand when you hang the photo frame on the wall.
Turning the photo frame on 1 2 Insert the plug of the AC adaptor into the DC IN 5 V jack on the rear of the photo frame. Connect the AC adaptor to the wall outlet. The photo frame is automatically turned on. DC plug • The socket outlet should be as close as possible to the unit, and easily accessible. • Do not place the photo frame on an unsteady or tilted surface. • Connect the AC adaptor to an easily accessible wall outlet close by.
Operations in an initial state zTips x If the photo frame is not operated When the photo frame is turned on, the initial display appears. If the photo frame is not operated for 10 seconds, the demo mode is displayed. x Releasing the demonstration mode If any other button than the power button is pressed, the screen returns to the initial display. Setting the current time P Tip The B/b buttons become activated only when the Clock and calendar view mode (page 14) is not selected.
Let’s view an image Inserting a memory card Insert a memory card firmly into the corresponding slot with its label side facing toward you (when you are facing the back side of the photo frame). PNote When using a memory card of the following types, make sure to insert it in an appropriate adaptor. If you insert it without an adaptor, you may be unable to remove it.
Changing the display 1 Press the button corresponding to view mode you want to select. VIEW MODE buttons PNote If you do not operate the photo frame for a certain period of time, the style indicated by the cursor is automatically selected. The display changes to the selected view mode. 2 Press B/b/v/V to select a desired style, and then press (ENTER). The view mode screen is displayed. z Tip Style descriptions: .
About the information displayed on the LCD screen 4 Setting information Icons Meaning Protect indication Associated file indication (Displayed when there is an associated file such as a motion file or a miniature e-mail image file.) 5 Image number (folder-file number) Icons PNote Only alphanumeric characters can be displayed.
Try using various functions z Tips x Importing The number of images to be saved in the internal memory: • Resize: approx. 250 images • Original: the number of images may vary, depending on the original image file size. x Exporting Any memory card that is not recognized by this photo frame is shown in gray and you cannot select it. PNotes x During exporting/deleting Avoid doing the following.
Specifying the playback device Press SELECT DEVICE. Press v/V to select the playback device, and then press (ENTER). z What is “playback device”? A memory card or the internal memory. P Note During Clock and calendar display, you cannot select the (Select device) tab. P Note Enlarging an image may reduce the quality depending on the image size. Enlarging/Reducing Press (zoom in) or (zoom out) on the remote control.
Changing the settings of the auto power on/off function z Tips x During operation The power is turned off automatically at the time you set for [Power-OFF timer]. x During the standby mode The power is turned on automatically at the time you set for [Power-ON timer]. 1 2 3 Press MENU, B/b to select the (Settings) tab. Press v/V to select [Auto Power ON/OFF], and press (ENTER). Press v/V to select [Setup method], and then press (ENTER).
1 Press V to select [Time setting] , (ENTER). 2 Press v/V to select the desired period after which you want to turn the photo frame off automatically: 2 hours, 4 hours, or OFF. Then press (ENTER). 4 Press MENU. Changing the settings Press MENU, then B/b to select the (Settings) tab. Press v/V to select the item and setting value, and then press (ENTER). PNotes • Depending on the status on the photo frame, some settings of some items cannot be changed.
Connecting to a computer P Notes • Use a mini B-Type USB cable.* * When you use a commerciallyavailable USB cable, use a USB cable with a mini B-type plug (for the USB mini B connector of this unit, frameside connector type) shorter than 3 meters. • If multiple USB devices are connected to a computer or if a hub is used, a problem may occur. In such a case, simplify the connection. • You cannot operate the photo frame from another USB device being used simultaneously.
Troubleshooting If an error message appears Error message Meaning/Solutions Cannot delete a protected file. • To delete a protected file, cancel the protection on your digital camera or computer. Memory card is protected. Remove • The memory card is write-protected. Slide the writeprotection then try again. protect switch to the enable position. (.Digital Photo Frame Handbook, page 43) Error reading the Memory Stick. / Error reading the SD Memory Card. /Error reading the iternal memory.
Symptom Check item Some images are not displayed. • Did you rename the file with c If you named or renamed the file on your a computer or other device? computer and the file name includes characters other than alphanumeric characters, the image may not be able to be displayed on the photo frame. Cause/Solutions • Is there a folder with more than 8 levels in its hierarchy on the memory card? c The photo frame cannot display images saved in a folder that is more than 8 levels deep.
Additional information Precautions Installation • Avoid placing the photo frame in a location subject to: – vibration – humidity – excessive dust – direct sunlight – extremely high or low temperatures • Do not use electrical equipment near the photo frame. The photo frame will not work properly in electromagnetic fields. • Do not place heavy objects on the photo frame.
Specifications x Photo frame LCD screen LCD panel: 18cm/7inch, TFT active matrix Total number of dots: 336,960 dots (480 × 3(RGB) × 234) dots Effective display area Display aspect ratio: 16:10 LCD screen area: 16.3cm/6.
x AC adaptor On trademarks and copyrights Power requirements - 100 V to 240 V, 50 Hz/60 Hz 0.4 A Rated output voltage 5 V 2.2 A Dimensions Approx. 79 mm × 34 mm × 65 mm (width/height/depth) (excluding the protruding parts) Mass Approx. 105 g See the label of AC adaptor for more details. • • Design and specifications are subject to change without notice. • *1 Customer support home page The latest support information is available at the following home page address: http://www.sony.
Memo 26 GB
Memo 27 GB
Printed using VOC (Volatile Organic Compound)-free vegetable oil based ink.
