Reference Guide

11
Overview
When using the remote control to operate the transmitter unit and connected external equipment, the
following button operations are available.
Transmitter and External Equipment Button Descriptions
Button Description
1 AV POWER Press to turn the external equipment on and off after
selecting an input using the input select buttons 2.
2 IN 1/2/3/4
HDMI, IN 5
COMPONENT
input select
buttons
Press one of the input select buttons to select and control
equipment connected to the corresponding input. The
input select button indicator lights up momentarily when
pressed to show which external equipment the remote
control is operating. See the Startup Guide for
programming the remote control.
3 IN 1/2/3/4
HDMI, IN 5
COMPONENT
operating
buttons
• &m/M&: Goes to the beginning of the previous/next
title/chapter/scene/track.
• / : Replays the scene/briefly fast forwards the
scene.
• m/M: Fast reverses/fast forwards the disc when
pressed during playback.
• N: Plays a disc at normal speed.
• X: Pauses the playback.
• x: Stops the playback.
6 GUIDE Press to display the Digital Electronic Program Guide
(EPG) when the satellite receiver or cable box is
selected.
7 RETURN Press to go back to the previous screen or exit from the
screen when displaying menu items and settings.
8 HOME (MENU) Press to display menus of selected external equipment.
9 0-9, ENT For a set-top box, press 0-9 to select a channel. Press
ENT to change channels immediately.
For Blu-ray Disc or DVD, etc., press 0-9 as number key
entry. Press ENT to confirm.
0 For a set-top box, use with 0-9 and ENT to select digital
channels. For example, to enter 2.1, press , , ,
and ENT.
For Blu-ray Disc or DVD, etc., use with 0-9.
qd DVR/VCR
record
buttons
REC z: Press to record. Pressing this button alone starts
the recording process.
REC PAUSE
X: Press to pause the recording.
REC STOP x: Press to stop the recording.
qf BD/DVD TOP
MENU/ BD/
DVD MENU
Press to display the top menu of the BD/DVD disc.
Press to display the BD/DVD disc menu.
qg CONNECT Press to switch to another wireless channel if the LINK
LEVEL is low or the picture is noisy or the sound quality
is diminished.
~
• You must setup the IR Blaster before you can use external equipment (see
page 13).
• Button functionality may differ depending on your equipment.
If some functions do not work, then use the remote control supplied with your
equipment.
REC
CONNECT
SETUP
TOP MENU
MENU F1 F2
BD/DVD
REC PAUSE
MUTING JUMP
REC STOP
DISPLAY
WIDE PICTURE CC
MENU
FREEZE
1
4
7
2
5
8
0
3
6
9
ENT
VOL CH
WIRELE
SS LINK
AV POWER TV POWER POWER
COMPO-
NENT
IN 5
IN 1 IN 2 IN 3 IN 4
TV
HDMI
6
1
3
2
7
8
9
0
qg
qd
qf
2
1
(continued)