Owner's Record The model and serial cambers are located at the rear. Record these number in the space provided below, Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. Serial No. . To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.
Table of Contents Reading the Supplied CD-ROM Manual System Overview System Configuration — Printouts that Can Be Made with This System .. Flash Modes and Examples of Shooting Conditions .. Preparations Unpacking Preparation of the Camera .. Preparation of the Printer Attaching the Paper Holder Operation Preparations Taking a Picture Printing a Picture .. Reprinting a Picture Stored in Memory of the Printer (COPY PRINT) . Viewing a Picture Deleting a Picture Protecting a Picture (PROTECT) ..
Reading the Supplied CD-ROM Manual The supplied CD-ROM includes manuals for the UPXC200 (in Japanese, English, French, German, Spanish, Italian, Portuguese, Russian, Chinese, and Korea). The copies of these manuals are created in PDF {Portable Document Format) format. Preparation To read the manuals included on the supplied CD-ROM, the Adobe Acrobat Reader is required. Tf the Adobe Acrobat Reader is not installed on your computer, you can copy it from the Acrobat folder on the CD-ROM.
System Overview The Sony LPX-C200 digital printing system is designed to allow you to take pictures with a digital camera and to print them on two types of paper: UPCHUCK or UPCHUCK. The system adopts Bluetooth wireless technology, which enables communication between the camera and printer without using cables. System Configuration Using the Bluetooth function Camera Bluetooth transmission Printer You can send images from the camera to the printer without a cable. Connecting to a computer on page 47.
Printouts that Can Be Made with This System | The system can print 22 types of printouts and twa types images. They do not show the exact size to be printed. | of guide print. When the UPCHUCK is used, all types of Under each image, the size number and size is shown. printouts arc available, while when the UPCHUCK and D8 indicate that there are different used, the types that can be printed are limited.
Guide print | Zag] Guide Print-RIB Guide Print-Dogma When the UPCHUCK is used B® 15 5 Guide Print RGB Guide Print Dogma 0 22 2 3.98% 70 mm 7.60 x 40 mm 6.54% 54mm 2 x 2 inch 11.45% 35 mm 4.80 60 mm 10.47 x 37 min 9.50 x48.5 mm 13.43% 33 mm ! 5.7053 mm 12.45 x 45 min 4.38% 32mm 6.70% SEE doll Ole) Ble eek] Blo] |X is) 15. 34x28 mm 20. 45x Special-1 22. Special-2 16.
Flash Modes and Examples of Shooting Conditions The system offers five types of flash modes. Shooting examples in each mode are introduces here. For details on shooting conditions, refer to “Operating Instructions (Advanced Operations)” Auto flash and auto exposure mode (A%} This is the default mode of the camera, and is suitable for outdoor and indoor portrait shots. When the subject is not bright enough, the flash automatically lights.
No flash and manual exposure mode M®) ‘This mode does not use the built-in flash, but uses an external flash connected with the synchronization cord, or is suitable for shooting under stable light sources such as studio light, video light, fluorescent light, ete. Flash Preparations Unpacking Make sure that the following accessories are supplied with your system.
2 Pall out the button battery case, 3 Tun stall the baton battery CR-2025 in its case, and insert the case. 4 Insert four NH-AA batteries. Preparations 5 Close the lid and lock it by sliding the button to CLOSE with the center projection of the button pressed while pushing the lid. ‘When replacing batteries, they may drop down if the battery compartment lid faces down. To avoid this, turn the grip so that the lid faces up.
Connecting the camera to a wall outlet Connect the DC cord of the PCS-AC08 AC power adapter (supplied) to the DC IN 8.4V jack of the camera. Then connect the AC power adapter to a wall outlet. Now you can use the camera on AC power. Using an AC power adapter, you need not worry about the remaining battery power. to wall outlet PENSACOLA 2 AC power adapter AC power cord {supplied} (supplied) Use the AC power adapter near the wall outlet.
Preparation of the Printer TT Before using the printer for the first time, you need to install a print cartridge and the paper tray, as indicated below. These preparations are not needed for everyday print operations, but are to be done as required. Preparing a print pack You need an optional printing pack (UPCHUCK or UPC X34) designed for the printer. The pack contains a set of print paper and a print cartridge. + Do not rewind the ink ribbon and use the rewound print cartridge for printing.
« Do not rewind the ink ribbon and use the rewound print cartridge for printing. Otherwise, proper Attaching the Paper Holder printing result will not be obtained, or even a Attach the supplied paper holder to the paper tray as breakdown may occur. follows: « If the print cartridge does not click into place, remove it and then re-insert it.
Inserting the print paper 1 Set the print paper into the ray. Print paper Riffle the print paper. Then insert the print paper with its printing surface (the side with ne imprint) facing up and the arrow pointing in the same direction as the arrow in the tray. You can set 25 sheets when the UPCHUCK is used, and 30 sheets when the UPCHUCK is used. 2 Remove the protective sheet on the print paper. : Be sure to keep the protective sheet, which is used for cleaning the inside of the printer.
Connecting the printer to a wall outlet Connect the supplied AC power cord to the AC IN connector of the printer and then to wall outlet, Printer AC power cord (supplied) to wall outlet Operation This section describes the basic procedures for taking and printing a picture, and also displaying a picture. The system has additional functions, which are described in. “Various Functions” on page 31 or in the supplied Operating Instructions (Advanced Operations). Preparations MENU bunion 1 Tum on the printer.
Press any button on the camera, and the Bluetooth display is turned off, and you can start taking a picture. If the printer name and Bluetooth address are still displayed in gray, and “DISCOVERED” does not appear, refer to the Operating Instructions (Advanced Operations). Shooting conditions set at the factory The conditions for taking a picture are set at the factory so that they can be controlled automatically.
“Delete?” appears. 2 Select OK by pressing A of the control button, and press ENTER of the control bunion, The picture on the LCD will be deleted, Display on the LCD in CAMERA mode An example of the display when the PLAY/CAMERA switch is set to CAMERA is shown below. Power source (Battery indicator or AG power adapter) | Resolution Exposure compensation | Focus lock {greengrocer (red) indicator) Remaining number of pictures {The number of pictures to be stored in memory with the set ¢ 0.
3 Select COLOR or B/W by pressing the COLOR/ B/W button. Each time you press the button, the deletion is toggled. COLOR: For printing a picture in color B/W: For printing a picture in black and white 4 press the control button to set the number of sheets is to be printed. 5 Press the PRINT button again. Picture data are transmitted to the printer, and “TRANSMITTING” appears on the LCD. ‘When the data have been transmitted, “TRANSMISSION ACCOMPLISHED. TOUCH ANY KEY TO CONTINUE. appears.
Viewing a Picture ~~ You can view pictures stored in memory on the LCD. —p 5,6 1 Set the PLAY/CAMERA switch to PLAY. 2 Set the POWER switch to ON. 3 Press any button to turn off the Bluetooth display. A picture in memory appears on the LCD. 4 Sega picture displayed on the LCD by pressing «or » of the control button. Displaying the nine-picture multiple display Nine pictures stored in the camera’s memory can be displayed at 2 time on the LCD. Then you can quickly search for a desired picture.
Deleting a Picture Pictures stored in the memory of the camera can be deleted one by one or all at once. Deleting pictures one by one 1 Set the PLAY/CAMERA switch to PLAY. Set the POWER switch to ON. 3 Press the MENU button twice. The Menu display appears. 4 Celesta picture to be deleted by pressing the control button. 5 Select DELETE by pressing the control button. 6 Press ENTER of the control button. The Delete display appears. 7 Select OK by pressing A of the control button.
The picture selected in step 6 is deleted, and the Menu display is retrieved. To cancel deleting a picture Select RETURN by pressing the control button instead of OK on the Delete or Delete All? display, and press ENTER of the control button. ‘The Menu display is retrieved. To finish deleting Press the MENU button. Protecting a Picture (PROTECT) To avoid deleting a picture accidentally, a picture protection function is available. You can protect pictures one by one or all at once.
6 Select a picture to be protected by pressing the control button, and press ENTER of the control button. The Protect display appears. 7 Check that ON is selected, and press ENTER of the control button. I ON is not selected, select ON by pressing A of the control button, then press ENTER of the control button, The protect mark appears on the picture selected in step 6. 8 Select RETURN by pressing ¥ of the control button, and press ENTER of the control button.
Menu Menu Configuration Camera CAMERA mode ExT RESOLUTION HIGH —MiD —8TD ZOOM 7pm : = 15610 19.8 mm [-AUTO ERASE To OFF & (Exposure Mods) AUTO [APERTURE PRIORITY MANUAL EXPOSURE Fd FLASH MODE~—— APERTURE —T—Fx.x Fx.% Fx. 1721ST} to 111000[5] +0,75EV to t0.00EV AUTO acne Push L-3000K fo 7000K OVERLOAD SETTING SETTING SAVE SETTING —CANCEL. [AE AREA oor Center Waited FACE Background LETUP (For details, see “SETUP menu.) bl SHUTTER I EXPOSURE WB.
Printer COLOR ADJUST rr CTN-RED (-7 10 +7) MAG-GEN YELLOWY DARK (7 1047) | LIGHT SHARPNESS (0 to +7) GAMMA SAVE SETTING (12/3) L_ LOAD SETTING (1/213) Bluetooth SETTING —— Bluetooth ADD | PASSKEY INPUT = MY DEVICE NAME = CONNECTION RECORD T t MODULE POWER PRINT SETTING PRINT OFFSET: COPY PRINT COPY PRINT: 1 [110 9] Menu PASSKEY INPUT re Shy UP-DX100 [NONE to 8] 1. Sony D KC-C200X 2. NONE 3.
Functions of the Menu items CAMERA mode Menu item Function Setting EXIT To exit Menu mode. RESOLUTION To select the resolution for recording, Record Resolution HIGH: 2288 x 1712 MID: 1280 x 960 STD: 832 x 624 ZOOM To select the zoom range. Zoom Range =7.50 to 19.8 mm, £=15.6 to 19.8 mm AUTO ARISE To select the recording mode. Auto Erase ON: When memory becomes full, the oldest image is deleted, and a new image is stored in mammary. OFF: When memory becomes full, recording stops.
PLAY mode Menu item Function Setting EXIT To exit Menu mode, PROPERTY To display the information on the selected image. DELETE To delete a picture stored in memory. Delete OK/RETURN DELETE ALL To delete all pictures except the protected | Delete All? ones stored in memory. OK/RETURN PROTECT To set or release the protection of Protect pictures. ON/RETURN PROTECT ALL To st or release the protection of all Protect All pictures stored in memory. ON/OFF/REYURN MOVE Move therapeutic on the multi-picture display.
Meant item Function Setting POWER SAVE “To set and releases power save made. Power Save OFF: No power save operation 3 MINUTES: For entering the power save mode in throe minutes, 10 MINUTES: For entering the power save mode in 10 minutes. VIDEO OUT “To select the format of the signal output | Video Qut from the VIDEO OUT suck. PAL: Supplies a PAL signal (The MONITOR (PAL) switch is enabled.) SCENT: Supplies an SCENT signal SOUND To turn on and off the sound with Sound operations.
Printer Menu item Function Setting COLOR ADJUST You can adjust the print quality, CTN-RED: The cyan and the red arc adjusted. MAG-GEN: The agents and the green are adjusted. YELLOWY: The yellow and the bus are adjusted. DARK: The brightness of a dirk area is adjusted. LIGHT: The brightness of a bright area is adjusted. SHARPNESS: The sharpness of edges of objects in a picture is adjusted. GAMMA: The tone of a picture is adjusted. SAVE SETTING The adjusted values are stored in the built-in memory.
Various Functions Using the Camera with Batteries ‘You can operate the camera with the inserted NI-AA batteries. To use the camera with the batteries, charge the batteries using the supplied battery charger. The batteries may not be fully charged when they are used for the first time or they have not been used for a long period of time. In such a case, repeat charging and discharging a few times.
2 Select BATTERY REFRESH by pressing the control button. 3 Press ENTER of the control button. The Cattery Refresh display appears. 4 Select START by pressing A of the control button. 5 sires ENTER of the control button. Refreshing batteries begins.
