Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. MUSIC SYSTEM FOR iPod ® and iPhone TM MODEL DK-AP8P Accessories Please confirm that only the following accessories are included. AC/DC adaptor x 1 RADPAA059AWZZ OPERATION MANUAL iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
DK-AP8P SPECIAL NOTES CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Important Instruction WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. “Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards.
IMPORTANT SAFETY INSTRUCTIONS 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel.
DK-AP8P IMPORTANT SAFETY INSTRUCTIONS (continued) Important Instruction 18) Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a) When the AC cord or plug is damaged, b) If liquid has been spilled, or objects have fallen into the product, c) If the product has been exposed to rain or water, d) If the product does not operate normally by following the operating instructions.
Contents DK-AP8P Page Products that have earned the ENERGY STAR ® are designed to protect the environment through superior energy efficiency. ENERGY STAR® is a U.S. registered mark. ■ General Information Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Controls and indicators . . . . . . . . . . . . . . . . . . 7 - 8 ■ Preparation for Use System connections . . . . . . . . . . . . . . . . . . . . 9 - 10 Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . .
DK-AP8P Precautions ■ General ● Do not remove the outer ● Please ensure that the equipment is positioned in a well-ventilated area and ensure that there is at least 4" (10 cm) of free space along the sides, top and back of the equipment. 4" (10 cm) cover, as this may result in electric shock. Refer internal service to your local SHARP service facility. ON/STAND-BY ESOUND 4" (10 cm) General Information ● Use the unit on a firm, level surface free from vibration.
Controls and indicators DK-AP8P 4 5 6 2 3 7 8 ESOUND ON/STAND-BY 9 Main Unit 1 2 3 9 4 5 6 7 8 SKIP PLAY MODE MENU TV DISPLAY SHUFFLE ENTER ON/STAND-BY CUE/ REVIEW ESOUND CURSOR VOLUME 10 11 12 13 Remote Control with touch panel ■ Precaution in using the touch panel ● Use soft cloth to gently clean the touch panel. ● Always place the remote control face up to avoid damage to the touch pad. ● Do not press the pad too hard, it can damage the touch sensor.
DK-AP8P Controls and indicators (continued) ■ Main unit back view 1. 2. 3. General Information 1 2 Reference page Video Out Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Audio Input Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 DC Input Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 3 The model name/serial no. label (*) The spec label (*) DK-AP8P S/NO.
System connections DK-AP8P Make sure to unplug the AC/DC adaptor before making any connections. ● Please make sure to set iPod or iPhone unit to either NTSC or PAL to match your TV signal. Please visit Apple’s home page for further information. ● Customer should also refer iPod or iPhone operation manual ■ Connecting iPod or iPhone to TV before making video out setting. ■ Using with the AC/DC adaptor 1 Plug the AC/DC adaptor cable into the DC IN jack on the unit.
DK-AP8P System connections (continued) ■ Using with the batteries Use 4 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar). Batteries are not included. Precautions for battery use: ● Installing the batteries incorrectly may cause the unit to malfunction. ● Insert the batteries according to the direction indicated in the Preparation for Use battery compartment. 1 Open the battery cover. Slide the cover in the direction of the arrow.
Remote control DK-AP8P This product contains a CR Coin Lithium Battery which contains Perchlorate Material – special handling may apply. California residents, see www.dtsc.ca.gov/hazardouswaste/perchlorate/. 1 While pushing the locking tab toward the center of the remote control, slide out the battery holder. Back of remote control Notes concerning use: ● Replace the batteries if the operating distance is reduced or if the operation becomes erratic. Purchase 2X “CR 2032”, coin lithium battery.
DK-AP8P General control ■ Volume control Press the VOLUME (+ or –) button on the main unit or touch VOLUME (+ or –) pad on the remote control to increase or decrease the volume. POWER indicator will be blinking when the volume reaches maximum or minimum level.
Listening to the iPod or iPhone equipped Click Wheel model) ● iPod (4th generation) (software 3.0.2 above) (Dock ● ● ● ● ● ● ● ● connector equipped Click Wheel model) iPod nano (2nd generation) (software 1.0.0 above) iPod nano (3rd generation) (software 1.0.3 above) iPod nano (4th generation) (software 1.0.3 above) iPod classic (software 1.0.3 above) iPod touch (software 1.1 above) iPod touch (2nd generation) (software 2.1 above) iPhone (software 2.2.1 above) iPhone 3G (software 2.2.
DK-AP8P Listening to the iPod or iPhone (continued) ■ To insert iPod or iPhone adaptor 1. Open the docking station by sliding out the top cover at the area marked. ON/STAND-BY ESOUND ON/STAND-BY ESOUND iPod and iPhone 2. Insert the iPod or iPhone adaptor into unit and connect your iPod or iPhone. iPhone (bottom) iPhone Dock connector ■ To remove iPod or iPhone adaptor Insert the tip of a screwdriver (“-” type, small) into the adaptor hole as shown and lift upward to remove.
DK-AP8P Simply remove the iPod or iPhone from the dock. It is safe to do so even during playback. ■ Navigating the iPod and iPhone menus with the remote control 1 2 Touch the MENU pad to view the menu on iPod or iPhone unit. Touch it again to go back to previous menu. iPod and iPhone Function Pause Main unit ____ Skip up/ down ____ Fast forward/ reverse ____ TV Display ____ Remote control Touch in the playback mode.
DK-AP8P Enhancing your system The audio cable is not included. Purchase a separate audio cable as shown below. Portable audio player Advanced Feature AUDIO IN Computer To the line output jack ■ Listening to the audio/video sounds from portable audio player, computer/notebook, etc. 1 Use Audio cable to connect the portable audio player, computer etc. to the AUDIO IN jack. When using video equipment, connect the audio output to this unit and the video output to a television.
Troubleshooting chart Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorized SHARP dealer or service center. DK-AP8P Symptom Possible cause ● iPod or iPhone will ● The iPod or iPhone is not making full not charge. ■ General power supply. ● When a button is ● Set the unit to the power stand-by ● No sound is heard.
DK-AP8P Maintenance ■ Cleaning the unit Periodically wipe the unit with a clean soft cloth. Speaker Caution: ● Do not use chemicals for cleaning (gasoline, paint thinner, etc.). It may damage the unit finishing. ● Do not apply oil to the inside of the unit. It may cause malfunctions. Speaker maximum Front speaker: 2.
MEMO
CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
