Operating Instructions

66
(1) Open the Network Menu.
For details on how to open the Network Menu, refer to the section “Accessing
to the network” in the operating instructions supplied with your camcorder.
<illustration>
(2) Select [
Mail], then execute it.
If the Receive screen is not displayed, select the Receive tab. The Receive
screen appears.
<illustration>
(3) Select [Receive], then execute it.
The screen for verifying the connection appears. Set the Bluetooth device to
connection standby with the camcorder beforehand. For details, refer to the
operating instructions supplied with the Bluetooth device.
<illustration>
(4) Check the telephone number.
When dialing to other telephone numbers
Select [TEL No.], then execute it. The registered telephone number list appears.
Select the desired telephone number, then execute it. The selected telephone
number is specified.
(5) Select [Connect], then execute it.
The camcorder starts dialing to the selected telephone number. When e-mail
has been sent, the message “Receiving Mail Complete” appears. Select [OK],
then execute it. The phone line is automatically disconnected.
<illustration> <illustration>
Using e-mail