Operating Instructions

(4) Select [Enter], then execute it.

The Send screen appears again.

4 Sending e-mail

Tip

You can send the e-mail message with your signature. For details, see “Attaching your

signature to the message” on page XX.

(1) Select whether you attach images or not.

When attaching images, see “Attaching images to e-mail” on page XX.

(2) Check the message.

When you check or modify the message, see “Checking or modifying the

message” on page XX.

(3) Select [Send], then execute it.

The screen for verifying the connection appears. Set the Bluetooth device into

connection standby with the camcorder beforehand. For details, refer to the

operating instructions supplied with the Bluetooth device.

(4) Check the telephone number.

When dialing to other telephone numbers

Select [TEL No.], then execute it. The registered telephone number list appears.

Select the desired telephone number, then execute it. The selected telephone

number is specified.

(5) Select [Connect], then execute it.

The camcorder starts dialing to the selected telephone number. After the

sending is completed, the message “Sending Mail Complete” appears. The

phone line is automatically disconnected.

Using e-mail