Operating Instructions

34
(2) Enter the telephone number of your access point.
For details on how to input characters, see “How to input characters” on page
XX.
(3) Select [Enter], then execute it.
The Provider Setting: Sony Style Connect screen appears again.
<illustration>
Tip
You can also register the telephone numbers of access points into [TEL2] and
[TEL3]. If necessary, enter the numbers into [TEL2] and [TEL3].
(4) Select [OK], then execute it.
The telephone numbers registration is complete.
Go to “4 Setting other preferences” on page XX.
3 Setting your provider preferences manually
This setup is only for using general providers. For details, consult your provider.
(1) Display the PPP screen following from step 3 in “1 Selecting your provider
type” on page XX.
If the PPP screen is not displayed, select the PPP tab.
<illustration>
(2) Set up the following items:
ID: Enter your login name for accessing your provider using a dial-up
connection.
Tip on “ID”
This “ID” is also referred to as a “user ID,” “login name,” “PPP login name,”
“network ID,” “account name,” “logon name,” “user name,” etc.
Password: Enter your password for accessing your provider using a dial-up
connection.
Tip on “Password”
This “Password” is also referred to as a “PPP password,” “network
password,” “connection password,” etc.
Setting network preferences