Operating Instructions

20
(10)Select [Exit], then execute it.
The Network Menu appears again.
When the registration was failed
Carry out the procedure “When using the Modem Adaptor with Bluetooth Function ”
on page xx again from step 4.
Displaying self information
You can display your camcorder information.
(1) Open the Network Menu.
For details on how to open the Network Menu, refer to the section “Accessing
to the network” in the operating instructions supplied with your camcorder.
<illustration>
(2) Select [
Setup], then execute it.
The Setup screen appears.
<illustration>
(3) Select [Bluetooth Setup], then execute it.
The Bluetooth Setup screen appears.
<illustration>
(4) Select [Self information], then execute it.
The Bluetooth: Self information screen appears.
<illustration>
Registering a Bluetooth device
This is the unique address equipped
with each camcorder at the factory. This
is used when exchanging information
between the devices. This cannot be
modified.
The model name