Operating Instructions

18
(2) Select [ Setup], then execute it.
The Setup screen appears.
<illustration>
(3) Select [Bluetooth Setup], then execute it.
The Bluetooth Setup screen appears.
<illustration>
(4) Select [Select], then execute it.
The Bluetooth devices list appears. When making a registration for the first
time, only [Return] and [New] are indicated. The list shows up to three
Bluetooth devices. When selecting the Bluetooth device listed on it, see the
section “Selecting other Bluetooth devices from the list” on page XX.
<illustration>
Tip
The last-used Bluetooth equipped device is listed next to [New].
(5) Select [New], then execute it.
The camcorder starts searching Bluetooth devices. When the searching is
completed, the available Bluetooth devices list appears.
<illustration>
Notes
•The searching time is for about 10 to 60 seconds. This time depends on the number
of Bluetooth devices around the camcorder.
•If the Bluetooth device you want to register is not searched, carry out the
procedure again from step 4.
Registering a Bluetooth device