Operating Instructions

This section describes making a registration with a Bluetooth device. Here describes the

procedure when registering the Sony Modem Adaptor with Bluetooth Function. Once

the registration is made, the camcorder can connect with the Bluetooth device without

deleting its registration. Up to three Bluetooth devices can be registered. Also, refer to

the operating instructions supplied with the Bluetooth device.

Notes

•When using the Sony BTA-NW1 Modem Adaptor with Bluetooth Function, install it

on a location that has no obstacles between the camcorder and the device, and the

distance must be within 10 m (3.3 feet).

•The connection may be interrupted depending on the communication condition.

When using the Modem Adaptor with Bluetooth Function

1 Preparing the Modem Adaptor with Bluetooth Function

Set the Modem Adaptor with Bluetooth Function into the connection standby state

(BONDING). For details, refer to the operating instructions supplied with the Modem

Adaptor with Bluetooth Function.

2 Specifying the Modem Adaptor with Bluetooth Function as the

connection device

(1) Open the Network Menu.

For details on how to open the Network Menu, refer to the section “Accessing

to the network” in the operating instructions supplied with your camcorder.

– Preparation –

Registering a Bluetooth device