Deleting images — DELETE You can delete images stored in a “Memory Stick.” You can delete all images or selected images. Before operation Insert a “Memory Stick” into your camcorder. (1) Set the POWER switch to MEMORY or VCR. (2) Press PLAY or £1 PB, then press to select the image you want to delete. {3) Press FN to display PAGE. (4) Press DELETE. “DELETE?” appears on the LCD screen, (5) Press OK. The selected image is deleted. superstore pus Aswan, | = = Tintoretto FN Press EXIT.
Deleting images — DELETE — Lot any wo RE eRe Jetting Sin imam BRR Oder earn Before operation Insert a “Memory Stick” into your camcorder. (1) Set the POWER switch to MEMORY or VCR, | (2) In VCR mode, press MEMORY mode, go to step Press INDEX to display the index. ! {4) Press DEL, then press the image you wart to delete. The number of the selected image is highlighted. (5) If there is other image you want to delete, press the image. (6) After selecting the image ta be deleted, press EXEC.
Deleting images DELETE — A RE You can delete all the unprotected images in a “Memory Stick.” Before operation Insert a “Memory Stick” into your camcorder. (1) Set the POWER switch to MEMORY. (2) Press FN to display PAGE (3) Press MENU, then select DELETE ALL in £7 in the menu settings (p. And press EXEC. (4) Press 1/| to select OK, then press EXEC. . i “OK” changes to "EXECUTE". ! (5) Press EXEC, : DELETING appears on the LCD screen. When all the unprotected images are deleted, COMPLETE is displayed.
I Writing a print mark ¢ ~ PRINT MARK You can specify the recorded still image to pant out by putting marks. This function is useful for printing out still images later. Your camcorder conforms with the POOF (Digital Print Order Format) standard for specifying the still images to print out. Before operation i Insert a “Memory Stick” into your camcorder, ! (1) Set the POWER switch to MEMORY or VCR. VCR mode, press MEMORY mode, go to step Press INDEX to display the index. . (4) Press & MARK.
— Viewing images Using your Computer — Viewing images on your computer Introduction There are the following ways of connecting view mismanages saved on a “Memory Stick” or To view images on a comp: — c— —— your camcorder to a computer in order to recorded on a tape on your computer. uteri which has a Memory Stick slot, first remove the [Memory Stick" from your camcorder and then inset t into the computer's Memory Stick slot. .
Viewing images on your computer introduction nemeses— — — ae “Memory Stick” + “Memory Stick” operations on your camcorder cannot be assured if a "Memory Stick” formatted on your computer is used on your camcorder, or if the “Memory Stick” in your camcorder was formatted from your computerate when the USB cable was connected, ‘ *Da not compress the data on the “Memory Stick.
Connecting your camcorder to your computer using the i.LINK cable = For Windows users r——— — —— You can view or edit the images recorded on a tape using your computer, You can also record images edited with the computer on the tape. To view images on your computer, the application software Movie Shaker Verve for MICRO MY (supplied) and LINK cables require i.LINK (MICRO Interface} Signal flow LINK cable (optional) Before installing the i.
| [a ~ Connecting your camcorder to your computer using the USB cable ~ For. Windows users css Complete installation of the USB driver before connecting your camcorder to your computer. If you connect your camcorder to your computer fist, you will not be able to install the USB driver correctly. When connecting to a computer via the USB jack You must install a USB driver onto your computer in order to connect your camcorder to the computer's USB connector.
J Connecting your camcorder to your computer using the USB cable ~ For Windows users HBr ERRS Rg Age aaa, led Recommended Windows environment os: } Microsoft Windows 98, Windows 98SE, Windows Me, Windows 2000 Professional, Windows XP Home Edition or Windows XP Professional Standard installation is required. However, operation is not assured if the above environment is an upgraded OS, CPU: MMX Pentium 200 Mz or faster ‘The USB connector must be provided as standard.
L ir Connecting your camcorder to your computer using the USB cable , ~For Windows users Hims RE USE SR Stern the following operation without connecting the USE cable to your computer. Connect the USB cable according to “Making the computer recognize your camcorder’, 1£ you are using Windows 2000 Professional, log in with permission of administrators. Tf you are using Windows XP, log in with permission of compute administrators, (1) Turn on your computer and allow Windows to load.
I Connecting your camcorder to your computer using the USB cable ~ For Windows users viewing images recorded on a tape on your computer Refer to page + + for details on viewing the “Memory Stick” images on your computer. You ends to install PIXELS Image Mixer to view images recorded on a tap on your computer. Install it from the CD-ROM supplied with your camcorder. To install and use this software in Windows 2000 Professional, you must be authorized as Power Users or administrators.
Connecting your camcorder to your computer using the USB cable ~ For Windows users (10) Follow the on-screen messages so that the Add Flatware Wizard recognizes that the USB drivers have been installed. The Add Hardware Wizard starts three times because three different USB drivers are installed. Be sure to allow the installation to complete without interrupting it. Far Windows 2000 Professional, Windows XP users: {11} After the “Files Needed” screen appears. Open “Browse...
Connecting your camcorder to your computer using the USB cable For Windows users — Argon TERR TRE The USB driver has been registered incorrectly as your computer was connected to your camcorder before installation of the USB driver was completed. Perform: the following: procedure to correctly install the LSB driver. Viewing images recorded on a tape Step 1: Uninstall the incorrect USB driver @ Tum on your computer and allow Windows to load. @ Connect the AC power adapter, and set the POWER switch to VCR.
Connecting your camcorder to your computer using the USB cable — For Windows users 1 GZ Py divots 83 Foggy di dives GT 10E ANTEDATED! cottars 5 DE APOSTATES contrasts i Key boors 1-4; Net) EZI01BA/SAR ALLY Audio Corralled $8 Sacra outs river | usr commoners eke} DIOCLETIAN UR Universal Host Controvert 2444 65 658 Carports Sos TERI Windows 2000 Professional Windows XP ® Tum the POWER switch to OFF (CHG) on your camcorder, and then disconnect the USB cable. @ Restart your computer.
| I Connecting your camcorder to your computer using the USB cable For Windows users — — Viewing images recorded on a “Memory Stick” Step: Uninstall the Incorrect USB driver © Turn on your computer and allow Windows to load. @ Inserts “Memory Stick” into your camcorder. @ Connect the AC power adapter, and set the POWER switch to MEMORY. @ Connect the USB connector on your computer to the {f (USB) jack on your camcorder using the USB cable supplied with your camcorder.
_ Viewing images recorded on a tape on your computer — For Windows users earthling iE ER SSM Raa You need to install the USB driver and PIXELS Image Mixer to view images recorded on a tape on your computer you are using Windows 2000 Professional, you must be authorized as Power Users or log in with permission of administrators. If you are using Windows XP, log in with permission of managers. Viewing images recorded on a tape {1) Tum on your computer and allow Windows to load.
Viewing images recorded on a tape on your computer ~For Windows users — — Preview window (7) Connect the § (USB) jack on your camcorder to the USB connector on your computer using the supplied USB cable. undulation) nok Burs bemuse] Pumas ¥ (USB) jack USB connector GET USB cable (supplied) (8) Press Bl on the LCD screen to start playback. The picture from the tape appears on preview window on your computer.
Viewing images recorded on a tape on your computer ~ For Windows users Capturing still images — — Preview window Thumbnail list window on Click (ZT). (2) Looking at the preview window, move the cursor to (J) and click it at the point you want to capture. The still image on the screen is captured. Captured images are displayed in the thumbnail list window. Capturing macing pictures Preview window Thumbnail fist window (1) Click .
I F Viewing images recorded on a tape on your computer = For Windows users svm— — — Notes : * PIXELS Image Mixer is only for the DV equipment though it has the Sanction that adopts the § LINK cable. To view images recorded on a MICRO MY tape, usc the application software Movie Shaker Ver.3.1 for MICRO. + When you view images on your computer with the USB connection, the following may occur. This is not a malfunction. ~The image shakes up and down.
Viewing images recorded on a tape on your computer For Windows users —" css Sheathe an Lind Ballplayers: Hon nonskid i mixer Er) SLUR 4 “PIXELS Image Mixer Ver.1.0 for Sony” online help site is available where you can find the detailed operating method of “PIXELS Image Mixer Ver. LO for Sony”, (1) Click (P located in the upper-right comer of the screen. ‘The Image Mixer's Manual screen appears. {2} You can find the information you need from the list of contents.
Viewing images recorded on a “Memory Stick” on your computer For Windows users cn — sii re wr Before operation You need to install the USB driver to view the “Memory Stick” images on your computer application such as Windows Media Player must be installed to play back moving pictures in Windows environment. (1) Tum on your computer and allow Windows to load. {2) Insert a “Memory Stick” inch your camcorder, and connect the AC power adapter tp your camcorder. (3) Set the POWER switch to MEMORY.
1 Viewing images recorded on a “Memory Stick” on your computer For Windows users — sn dBc soar mania Image files recorded with your camcorder are grouped in folders by recording mode. The meanings of the file names are as follows.
tl Connecting your camcorder to your computer using the USB cable For Macintosh users When connecting to a computer via the USB jack ‘You must install a USB driver onto your computer in order to connect your camcorder to the computer's USB connector. The USB driver can be found on the CD-ROM supplied, along with the application software required for viewing images. Mac 0 or Mac 05 X standard installation is required. However, note that the update to Mac should be used for the following models.
Connecting your camcorder to your computer using the USB cable ~ For Macintosh users Iris ERE es Do not connect the USB cable to your computer before installation of the USS driver is completed, : For Mac OS users {1) Turn on your computer and allow the Mac OS to load. (2) Insert the supplied CD-ROM in the CD-ROM drive of your computer. ‘The application software screen appears. 3) Click the "USB Driver” to open the folder containing the six files related to “Driver.
Viewing images recorded on a “Memory Stick” on your computer —For Macintosh users swing imagery Before operation You need to install the USB driver to view the "Memory Stick” images on your computer (p. vs). i Quick Time 3.0 or newer must be installed to play back moving pictures. 1) Turn on your computer and allow Mac OS to load. (2) Insert a “Memory Stick” into your camcorder, and connect the AC power adapter to your camcorder. {3} Set the POWER switch to MEMORY.
—Using the Network function — Accessing the network —~ DC R-IP220 only You can access the Internet using a Bluetooth equipped device that is complied to your camcorder. Once the access is made, you can view a Web page, send /receive your e-mail, etc. This section describes only how to pen the Network Menu. (1) Set the POWER switch to MEMORY/NETWORK. (2) Press NETWORK.
i Accessing the network Howe nee Gr cco When Geriatrics IR NETWORKING HEY When operating the network functions, put your camcorder in stable place. The operation buttons needed in NETWORK med are displayed on the LCD screen. Press the buttons with the supplied stylus. After using the stylus Put it back in the holder on the grip belt. Hold the stylus correctly.as shown in the illustration and insert it until it clicks. 177 ] | 7 00.425.
— Customizing Your Camcorder — Changing the menu settings To change the mode settings in the menu settings, press }/1 to select the menu items. The default settings can be partially changed. First, select the icon, thee the menu item \ and the mode. > (1) Set the POWER switch to CAMERA, MEMORY /NETWORK (DC R-IP220 i only), MEMORY (DC R-IP210 only) or VCR. : (2) Press EN to display PAGE! (3) Press MENU to display the menu. (4) Press | /1 to select a desired icon, then press EXEC.
Changing the menu settings To return to FN Press EXIT. Menu items are displayed as the following icons: BE MANUAL SET CAMERA SET CORSET LCD/VF SET MEMORY SET CM SET TAPE SET SETUP MENU OTHERS ting Menu items differ depending on the position of the POWER switch. The LCD screen shows only the items you can operate at the moment. POWER Contemn Mode Meaning switch KID MANUAL SET : SE PROGRAM AE — To suit your specific shooting requirement (p.
I. = Changing the menu settings POWER minuteman Mode Meaning switch Ho CAMERA SET © ZOOM ® OFF To deactivate the digital zoom. Up to 10x zoom CAMERA i is carried out, 20x To activate the digital zoom. More than 10x to 2x 200m is performed digitally (p. 120% To activate the digital zoom. More than 10x to 120x zoom Is performed digitally (p. EXPANDED F _@ OFF Not to activate the expanded focus MEMORY — CAMERA oN’ While focusing manually, the center of the A screen is displayed at twice the size.
| wd Changing the menu settings POWER leonine Made Meaning switch AF.
IL Changing the menu settings S— POWER recondite Mode Meaning switch 1 MEMORY SET STILL SET BURST OFF Not ta record continuously MEMORY NORMAL To record from fou to 13 images continuously 00) _ HIGH STEED _Ta record up fo 16 images continuously EXPURGATE To record three images continuously with different exposure MULTISTORY To record nine images continuously QUALITY ~~ @SUPERFINE To record still images in the finest image quality MEMORY made (p.
HE | Lo Changing the menu settings POWER malcontent Mode Meaning switch Fo] MEMORY SET SUED SHOW ~~ —— To play back images in a continuous loop (p. MEMORY ss FILE NO. # SERIES To assign numbers to file in sequence even if the MEMORY “Memory Stick” is changed VCR RESET To reset the file numbering each time the “Memory Stick” is changed DELETE ALL — To delete all the unprotected images (p.
Changing the menu settings —— "POWER Confinement Mode Meaning switch (0 cm SET TITLE ERASE — To erase the title you have superimposed {p. CAMERA VCR. SPLATTED ~~ @ON To display the title you have superimposed. VCR OFF Not to display the title TAPE TITLE — To label a cassette (p. CAMERA VCR ERASE ALL — To erase all the data in cassette memory (p. CAMERA VCR £3 FLOODPLAIN @ ON To display the cassette information of the tape CAMERA This is displayed for five seconds in the VCR following cases {p.
I Changing the menu settings POWER Icon/item Mode Meaning switch {ES SETUP MENU CLOCK SET — To set the date or time (p. CAMERA MEMORY USB STREAM @ OFF ‘To deactivate the USE streaming Function. CAMERA ~ VCR ON To activate the USE streaming function (p. 3 LANGUAGE @ ENGLISH" Ta display the following information indicators CAMERA English: min, STY, REC, CAPTURE, VOL, © MEMORY ._ Se H and START .
= F Changing the menu settings . POWER confinement Mode Meaning switch Ef OTHERS DATA CODE @DATE/CAM When you press DATA CODE on the Remote MEMORY {On the Remote Commander, the date, time and various settings VCR Commander) are displayed during playback (p. DATE ‘The date and time are displayed during © playback. AREA SET — “To set your area temporarily when using your CAMERA camcorder in a new location (p.
I — Troubleshooting — Types of trouble and how to correct trouble If you run into any problem Using your camcorder, use the following table to troubleshoot the problem. If the problem persists, disconnect the power source and contact your Sony dealer. [f "CHICHI appears on the LCD screen, the sell-diagnosis display function has activated. See page Symptom Cause and/or Corrective Actions START/STOP does not operate. = The POWER switch is not set to CAMERA. =» Se tit to CAMERA (p. + The tape has run out.
Types of trouble and how to correct trouble Symptom Cause and/or Corrective Actions ‘An unknown picture is displayed on the LCD screen or in the viewfinder. + 1£ 10 minutes elapse after you set the POWER switch to CAMERA without a cassette inserted, your camcorder automatically starts the demonstration. > Insert a cassette or press the LCD screen. The demonstration stops. You can alas cancel DEMO MODE {p. in the menu settings. The picture is recorded in incorrect or unnatural colors.
1 Types of trouble and how to correct trouble EEE RR eae Symptom The POWER switch does not turn on. Cause and/or Corrective Actions « The battery pack is not inserted, oc is dead or nearly dead. = Insert a charged battery pack (p. * The AC power adapter is not connected to a wall outlet, 3 Connect the AC power adapter to a wall outlet (p. ‘Tha battery pack Is quickly discharged. The battery remaining indicator does not indicate the correct time. + The temperature of the environment is too low.
190 Types of trouble and how to correct trouble — Ee GR SEE . Symptom The “Memory Stick” does not function. Recording does not function. The image cannot be deleted. You cannot format the “Memory Stick” Deleting all the images cannot be carried out. You cannot protect the image. You cannot write a print mark on the still image. You cannot play back images actual size. You cannot pay back image data | 190 Cause and/or Corrective Actions « The POWER switch is not set to MEMORY. » Set it to MEMORY (p.
I Types of trouble and how to correct trouble Symptom Cause and/or Corrective Actions A title is not recorded. A cassette label is not recorded. * 20 titles have been recorded. + Erase unnecessary title (p. + The cassette is set to prevent accidental erasure. 5 Slide the write-protect tab so that red portion is not visible (p. * « The tape has a blank portion in the retarded portion. + Superimpose the title to the recorded position (p. «The tape is set to prevent accidental erasure.
Types of trouble and how to correct trouble Symptom Cause and/or Corrective Actions While charging the battery pack + Charging is completed. inserted in your camcorder, the * The hatter pack is nwt properly inserted. battery CHG lamp does not light up. Insert it proper (p. » You cannot charge the battery pack + The POWER switch is nat set to OFF (CHG). inserted in your camcorder. 3 Set it to OFF (CHG). ‘While charging the battery pack + The battery pack is not properly inserted.
Self-diagnosis display Your cardamom has a self-diagnosis display function, ‘This function displays the current condition of — your camcorder as a five-digit code (a combination grieve of a letter and figures) on the LCD screen. Ifa five: digit code is displayed, check the following code chart. The last two digits (indicated by D0) will differ depending on the state of your camcorder. LED screen or Viewfinder 1 Self.diagnosis display” COD You can service your camcorder yourself.
I. Ir HUT Warning indicators and messages If indicators and messages appear on the LCD screen, check the following: 194 See the page in parentheses “{ )" for more information. Warning indicators 100-0001 100-0001 Warning indicator as to file Slow ashing: +The file is corrupted. «The file is unreadable. You are trying to carry out MEMORY MIX function on a moving picture (p. ©:21:00 Selim-diagnosis display (p. +) 3 The battery is dead or neatly dead Slow dashing: The battery is nearly dead.
J Warning indicators and messages Warning messages + CLOCK SET « FOR “Monolithic” BATTERY ONLY « db CLEANING CASSETTE? « COPY INHIBIT = [FULL « $I0n * INTERFILE + INO MEMORY STICK + 5 MEMORY STICK ERROR * 3 FORMAT ERROR = &J 0= DIRECTORY ERROR *» TI PLAY ERROR » £3 REC ERROR « E32 TAPE END * BRNO TAPE « DELETING » FORMATTING + % NOW CHARGING + 2% A CLEANING END . 4 CLEANING TAPE END * 8 TITLE FULL « INPUT ERROR + CHANGE TO "CAM" or. "VCR" Set the date and time (p. Use an “lafolIHIUM” battery pack (p.
E — Additional information — Usable cassettes You con use BAHT MICRON casts onl You cannot use any other 6, Hil Hi8, ©) Digital, 05 VHS, ISLE VHS, SAI 5-VHS, SNR S-VHSC, MH Bernays, ED Beta max, mini DY cassettes. : All of the MICRO MY cassettes have Micro Cassette Memory. J SHEW, MU, and ARMS MICRO are trademarks of Sony Corporation. When you play back : If the tape you play back on your camcorder contains copyright signals, you cannot : copy it with other GOOIER connected to your camcorder.
IL About the “Info Lithium” battery pack What is the “Info Lithium” battery pack? The “Info Lithium” battery pack is a lithium-ion battery pack that has functions for communicating information related to operating conditions between your camcorder. The “Info Lithium" battery pack.calculates the power consumption according to the operating conditions of your camcorder, and displays the remaining battery time in minutes.
About the “Info Lithium” battery pack How to store the battery pack + If the battery pack is not used for a long time, do the following procedure once per year to maintain proper function. 1. Fully charge the battery. 2. Discharge on your electronic equipment. 3. Take out the battery from the equipment and store it in a dry, cool place. * Nose the battery pack up on your camcorder, leave your camcorder in the recording mode until the power goes off without a cassette inserted.
About i.LINK The LINK (MICRO MY Interface) on this unit is an i. LINK-compliant MICRO MY input/output jack. This section describes the | LINK standard and its features. What is i.LINK? i LINK is a digital serial interface for handling digital video, digital audio acd other data in two directions between equipment having the LINK jack, and for controlling other equipment, equipment can be connected by a single i.
Ji | I About i.LINK w— — Sse SEE see 3 . KINE sienna Sr RE GRE For details on how to dub when this unit is connected to other video equipment Having DV jacks, see page This unit can also be connected to other LINK (MICRON Interface) compatible equipment made Ee: VAIN series personal computer) other than video equipment. y Before connecting this unit to your computer, make sure that application software supported by this unit is already installed on your computer.
