Operating Instructions
Table Of Contents
- Before you begin
- Getting started
- Basic operations
- Advanced operations
- Using alternative power sources
- Changing the mode settings
- Photo recording
- Shooting with all the pixels ﾐ PROG. SCAN
- Using the FADER function
- Shooting with backlighting
- Using the wide mode function
- Enjoying picture effect
- Recording with various effects ﾐ digital effect
- Shooting with manual adjustment
- Using the PROGRAM AE function
- Focusing manually
- Interval recording
- Cut recording
- Superimposing a title
- Making a custom title
- Labeling a cassette
- Watching on a TV screen
- Viewing the picture with the picture effect
- Viewing the picture with the digital effect
- Searching the boundaries of recorded tape with date ﾐ date search
- Searching the boundaries of recorded tape with title ﾐ title search
- Searching for a photo ﾐ photo search/photo scan
- Returning to a pre-registered position
- Displaying recording data ﾐ data code function
- Editing onto another tape
- Editing partially on a mini DV tape ﾐ DV synchro-editing
- Recording from a VCR or TV
- Replacing recording on a tape ﾐ insert editing
- Audio dubbing
- Memory card slot operations
- Using the memory card slot ﾐ introduction
- Recording an image from a mini DV tape as a still image
- Copying still images from a mini DV tape ﾐ photo save
- Recording still images on PC cards (not supplied) ﾐ memory photo recording
- Viewing a still picture ﾐ memory photo playback
- Preventing accidental erasure ﾐ PROTECT
- Deleting images
- Copying the image recorded with the memory card slot to mini DV tapes
- Playing back images in a continuous loop ﾐ SLIDE SHOW
- Additional information
- Usable cassettes and playback modes
- Charging the vanadium-lithium battery in the camcorder
- Resetting the date and time
- Simple setting of clock by time difference
- Tips for using the battery pack
- Maintenance information and precautions
- Using your camcorder abroad
- Trouble check
- Self-diagnosis function
- Specifications
- Identifying the parts
- Warning indicators
- Index
15
Basic operations
Camera recording
Zooming of more than 12x – digital zoom
• If you set the D ZOOM function to ON in the menu system, you can perform zooming of
more than 12x performed digitally. It is set to OFF at the factory.
•You cannot use the digital zoom when you set PROG. SCAN to ON in the menu system.
•The right side [a] of the power zoom indicator shows the digital zooming zone, and the left
side [b] shows the optical zooming zone. If you set the D ZOOM function to ON, the [a]
zone appears.
Selecting the start/stop mode
Your camcorder has two modes besides normal start/stop mode. These modes enable you to
take a series of quick shots resulting in a lively video.
(1) While pressing OPEN, open the LCD panel.
(2) Set START/STOP MODE to the desired mode.
: Recording starts when you press START/STOP, and stops when you press it
again (factory setting).
ANTI GROUND SHOOTING : The camcorder records only while you press down
START/STOP so that you can avoid recording unnecessary scenes.
5SEC : When you press START/STOP, the camcorder records for 5 seconds and
then stops automatically.
(3) Press START/STOP. Recording starts.
If you selected 5SEC, five dots appear on the LCD screen or in the viewfinder. The dots
disappear at a rate of one per second as illustrated below. When five seconds elapse and all
the dots disappear, the camcorder switches to Standby mode automatically.
To extend the recording time in 5SEC mode
Press START/STOP again before all the dots disappear. Recording continues for about 5
seconds from the moment you press START/STOP.
Notes on 5SEC recording
•If you have turned off the indicators on the LCD screen, the dots do not appear.
•When selecting “ ANTI GROUND SHOOTING” or “5SEC,” the fader function does not
work.
•When selecting “5SEC,” the time code is not displayed.
W
T
W
T
[a]
[b]
3
1
2
5SEC
ANTI GROUND SHOOTING
START/STOP
MODE
POWER
OFF
CAMERA
MEMORY
VTR
REC REC