3-080-162-12(1) Digital Video Camera Recorder Operating Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. Owner’s Record The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. DCR-TRV Model No. AC- Serial No. Serial No.
Welcome! Congratulations on your purchase of this Sony Handycam. With your Handycam, you can capture life’s precious moments with superior picture and sound quality. Your Handycam is loaded with advanced features, but at the same time it is very easy to use. You will soon be producing home video that you can enjoy for years to come. WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. For customers in the U.S.A.
For customers in the U.S.A. If you have any questions about this product, you may call: Sony Customer Information Center 1-800-222SONY (7669) The number below is for the FCC related matters only. Regulatory Information Declaration of Conformity Trade Name: Model No.: Responsible Party: Address: SONY DCR-TRV80 Sony Electronics Inc. 680 Kinderkamack Road, Oradell, NJ07649 U.S.A. Telephone No.: 201-930-6972 This device complies with Part 15 of the FCC Rules.
Main Features Recording moving pictures or still images, and playing them back •Recording moving pictures on the tape (p. 25) •Playing back the tape (p. 37) •Recording still images on the “Memory Stick” (p. 44, 107) •Recording moving pictures on the “Memory Stick” (p. 120) •Viewing still images recorded on the “Memory Stick” (p. 128) •Viewing moving pictures recorded on the “Memory Stick” (p. 130) Main Features •Viewing moving pictures recorded on the tape using the USB cable (p.
Main Features Functions for adjusting exposure during recording •Back light function (p. 32) •NightShot/Super NightShot/Color Slow Shutter (p. 32) •PROGRAM AE (p. 57) •Manual exposure (p. 59) •Flexible Spot Meter (p. 60) •Recording images with the flash (p. 111) Main Features Other uses Getting Started Accessing the network and using BIP (DCR-TRV80 only) •You can access the Internet using a Bluetooth device (optional) or a dedicated accessory that serves as a USB Network Adaptor (optional) etc.
Table of contents Main Features ...................................... 4 Quick Start Guide – Recording on tape ................................ 8 – Recording on “Memory Stick” ......... 10 Getting Started Using this manual ................................. 12 Checking supplied accessories ............ 14 Step 1 Preparing the power source ..... 15 Installing the battery pack ............. 15 Charging the battery pack ............. 16 Connecting to a wall outlet ...........
Table of contents Viewing images with a computer Viewing images with a computer – Introduction ............................... 141 Connecting your camcorder to a computer using the USB cable (For Windows users) .................... 144 Viewing pictures recorded on tape on a computer – USB Streaming (For Windows users) .................... 154 Viewing images recorded on “Memory Stick” on a computer (For Windows users) ....................
Quick Start Guide – Recording on tape Connecting the power cord Use the battery pack when using your camcorder outdoors (p. 15). Open the DC IN jack cover. AC Adaptor (supplied) Connect the plug with its v mark facing up. Inserting the cassette Quick Start Guide 1 Slide OPEN/ EJECT in the direction of the arrow and open the lid. 2 Push the center of the cassette back to insert the cassette. Insert the cassette straight as far as possible into the cassette compartment with the window facing up.
Recording a picture on the tape (p. 25) 2 Set the POWER switch 1 Remove the lens cap. to CAMERA while pressing the small green button. 3 Press OPEN to open the LCD panel. The picture appears on the screen. POW ER VCR OFF(CHG) CAMERA MEMORY/ NETWORK 4 Press START/STOP. Your Viewfinder When the LCD panel is closed, use the viewfinder with your eye against the eyecup. Adjust the viewfinder lens to your eyesight (p. 30). camcorder starts recording. To stop recording, press START/ STOP again.
Quick Start Guide – Recording on “Memory Stick” Connecting the power cord Use the battery pack when using your camcorder outdoors (p. 15). Open the DC IN jack cover. AC Adaptor (supplied) Connect the plug with its v mark facing up. Quick Start Guide Inserting the “Memory Stick” (p. 102) Insert the “Memory Stick” in the “Memory Stick” slot as far as it can go with the B mark facing up as illustrated. Access lamp B mark Press the “Memory Stick” once lightly to eject it.
Recording still images on the “Memory Stick” 1 Remove the lens cap (p. 25). (p. 107) 2 Set the POWER switch to MEMORY while pressing the small green button. Make sure that the LOCK switch is set to the left (unlock) position. 3 Press OPEN to open the LCD panel. The picture appears on the screen. VCR PO WE R OFF(CHG) CAMERA MEMORY/ NETWORK 4 Press PHOTO lightly. 5 Press PHOTO deeply. When the green ● mark stops flashing, then lights up, you can record a still image.
— Getting Started — Using this manual The instructions in this manual are for the two models listed in the table below. Before you start reading this manual and operating your camcorder, check the model number by looking at the bottom of your camcorder. The DCR-TRV80 is the model used for illustration purposes. Otherwise, the model name is indicated in the illustrations. Any differences in operation are clearly indicated in the text, for example, “DCR-TRV80 only.
Using this manual Note on connecting to other devices Precautions on camcorder care Lens and LCD screen/finder (on mounted models only) •The LCD screen and the finder are manufactured using extremely high-precision technology, so over 99.99% of the pixels are operational for effective use. However, there may be some tiny black points and/or bright points (white, red, blue or green in color) that constantly appear on the LCD screen and the finder.
Checking supplied accessories Make sure that the following accessories are supplied with your camcorder. 1 2 3 4 5 6 7 8 9 q; qa qs qd qf 1 AC-L15A/L15B AC Adaptor (1), Power cord (1) (p. 16) 2 NP-FM50 rechargeable battery pack (1) (p. 15, 16) 3 A/V connecting cable (1) (p. 42) 4 Wireless Remote Commander (1) (p. 215) 5 Size AA (R6) battery for Remote Commander (2) (p. 215) 6 Shoulder strap (1) 7 Lens cap (1) (p. 25) 8 Lens hood (1) (p. 30) 9 “Memory Stick” (1) (p. 100) 0 USB cable (1) (p.
Step 1 Preparing the power source Installing the battery pack (1) Lift up the viewfinder. (2) Slide the battery pack down until it clicks. Getting Started 1 2 To remove the battery pack (1) Lift up the viewfinder. (2) Slide the battery pack out in the direction of the arrow while pressing BATT down. 1 2 BATT release button 2 If you use the large capacity battery pack If you install the NP-FM70/QM71/QM71D/FM91/QM91/QM91D battery pack on your camcorder, extend its viewfinder.
Step 1 Preparing the power source Charging the battery pack Use the battery pack after charging it for your camcorder. Your camcorder operates only with the “InfoLITHIUM” battery pack (M series). See page 197 for details of “InfoLITHIUM” battery pack. (1) Install the battery pack on your camcorder. (2) Connect the AC Adaptor supplied with your camcorder to the DC IN jack with the DC plug’s v mark facing up. (3) Connect the power cord to the AC Adaptor. (4) Connect the power cord to a wall outlet.
Step 1 Preparing the power source Note Prevent metallic objects from coming into contact with the metal parts of the DC plug of the AC Adaptor. This may cause a short-circuit, damaging the AC Adaptor. Remaining battery time indicator The remaining battery time indicator in the display window indicates the approximate recording time when recording with the viewfinder. Getting Started When you use the AC Adaptor Place the AC Adaptor near a wall outlet.
Step 1 Preparing the power source Playing time Battery pack NP-FM50 (supplied) Playing time with the LCD panel closed 200 Playing time on the LCD screen 140 NP-FM70 415 295 NP-QM71/QM71D 485 340 NP-FM91/QM91/QM91D 725 520 Approximate minutes when you use a fully charged battery pack Note Approximate recording time and continuous playing time at 25°C (77°F). The battery life will be shorter if you use your camcorder in a cold environment.
Step 1 Preparing the power source Battery Info The number displayed as Battery Info is the approximate recording time. While the remaining battery time is being calculated “CALCULATING BATTERY INFO...” is displayed. Getting Started Note The BATTERY INFO indicator is not displayed in the following cases: – The battery pack is not properly installed. – Something is wrong with the battery pack. – The battery pack is fully discharged.
Step 2 Setting the date and time Set the date and time when you use your camcorder for the first time. The “CLOCK SET” indicator will appear each time you set the POWER switch to CAMERA or MEMORY unless you set the date and time settings. If you do not set the date and time, “--- -- ----” and “--:--:--” are recorded on the tape or the “Memory Stick” as the data code.
Step 2 Setting the date and time To return to FN (Function) Press EXIT. If you use your camcorder in an area where daylight saving time is used Set DST SET in to ON in the menu settings. Note on the time indicator The internal clock of your camcorder operates on a 12-hour cycle. • 12:00 AM stands for midnight. • 12:00 PM stands for noon. Getting Started When using your camcorder abroad Set the clock to the local time (p. 22).
Step 2 Setting the date and time Simple setting of clock by time difference You can easily set the clock to the local time by setting a time difference. Select AREA SET and DST SET* in in the menu settings. See page 181 for details. * Instead of DST, SUMMERTIME is displayed on the screen for some models.
Step 3 Using the touch panel Your camcorder has operation buttons on the LCD screen. Touch the LCD screen directly with your finger or the supplied stylus (DCR-TRV80 only) to operate each function. Getting Started (1) Press OPEN to open the LCD panel. (2) Set the POWER switch to CAMERA to record, VCR to play back or MEMORY to use the “Memory Stick.” (3) Press FN. Operation buttons on PAGE1 are displayed on the LCD screen. (4) Press PAGE2/PAGE3 to display PAGE2/PAGE3.
Step 3 Using the touch panel Operation buttons on each display When the POWER switch is set to CAMERA PAGE1 SPOT FOCUS, MENU, FADER, END SCH, SPOT METER, EXPOSURE PAGE2 SELFTIMER, DIG EFFT, LCD BRT, VOL, MEM MIX PAGE3 SUPER NS, COLOR SLW S, PRGRE REC, RMT CAM* When the POWER switch is set to VCR PAGE1 MENU, LCD BRT, VOL, END SCH PAGE2 PB ZOOM, DIG EFFT, DATA CODE PAGE3 V SPD PLAY, A DUB CTRL, REC CTRL When the POWER switch is set to MEMORY During memory camera PAGE1 SPOT FOCUS, MENU, PLAY, PB F
— Recording – Basics — Recording a picture See relevant “Step 1” and “Step 2.” 3 1 LOCK switch POW ER Recording – Basics (1) Remove the lens cap and pull the lens cap string to fix it. (2) Prepare the power source (p. 15 to 19) and insert the cassette (p. 8). (3) Set the POWER switch to CAMERA while pressing the small green button. This sets your camcorder to standby. (4) Press OPEN to open the LCD panel. The picture appears on the screen. (5) Press START/STOP. Your camcorder starts recording.
Recording a picture Note on recording Your camcorder records and plays back in the SP (standard play) mode and in the LP (long play) mode. Select SP or LP in the menu settings (p. 179). In the LP mode, you can record 1.5 times as long as in the SP mode. When you record the tape in the LP mode on your camcorder, we recommend playing back the tape on your camcorder.
Recording a picture Indicators displayed during recording Indicators are not recorded on the tape. Remaining battery time Recording mode STBY/REC 50min REC 0:00:01 60min Time code/Tape counter Recording – Basics Cassette Memory This appears when using the cassette with Cassette Memory. Remaining tape This appears after you insert the cassette. JUL 4 2003 12:05:56PM FN FN button Press this button to display operation buttons on the LCD screen.
Recording a picture After recording (1) (2) (3) (4) Set the POWER switch to OFF (CHG). Close the LCD panel. Eject the cassette. Remove the power source. Adjusting the LCD screen 180° 90° When you adjust the LCD panel, make sure if the LCD panel is opened up to 90 degrees. Note When using the LCD screen except in the mirror mode, the viewfinder automatically turns off.
Recording a picture Shooting with the mirror mode This feature allows the camera subject to view him-or herself on the LCD screen. The subject uses this feature to check his or her own image on the LCD screen while you look at the subject in the viewfinder. Recording – Basics (1) Set the POWER switch to CAMERA or MEMORY. (2) Rotate the LCD panel 180 degrees. Picture in the mirror mode The picture on the LCD screen is a mirror-image. However, the picture will be normal when recorded.
Recording a picture Adjusting the viewfinder If you record pictures with the LCD panel closed, check the picture with the viewfinder. Adjust the viewfinder lens to your eyesight so that the images in the viewfinder come into sharp focus. Lift up the viewfinder and move the viewfinder lens adjustment lever. The viewfinder lens adjustment lever Viewfinder backlight You can change the brightness of the backlight. Select VF B.L. in settings when using the battery pack (p. 175).
Recording a picture Using the zoom feature Move the power zoom lever a little for a slower zoom. Move it further for a faster zoom. Using the zoom sparingly results in better-looking recordings. W : Wide-angle (subject appears farther away) T : Telephoto (subject appears closer) W T T Recording – Basics W T W To use zoom greater than 10× Zoom greater than 10× is performed digitally. Digital zoom can be set to 20× or 120×.
Recording a picture Shooting backlit subjects – Back light function When you shoot a subject with the light source behind the subject or a subject with a light background, use the back light function. (1) Set the POWER switch to CAMERA or MEMORY. (2) Press BACK LIGHT. The . indicator appears on the screen. BACK LIGHT To cancel the back light function Press BACK LIGHT again. When shooting backlit subjects If you press MANUAL of EXPOSURE (p. 59) or SPOT METER (p.
Recording a picture Using Super NightShot Super NightShot makes subjects more than 16 times brighter than those recorded in NightShot. Recording – Basics (1) Set the POWER switch to CAMERA. (2) Slide NIGHTSHOT to ON. and ”NIGHTSHOT” indicators flash on the screen. The (3) Press FN and select PAGE3. (4) Press SUPER NS. indicator lights up on the screen. The (5) Press EXIT to return to FN. To cancel Super NightShot Press SUPER NS again to return to NightShot.
Recording a picture While using Super NightShot, you cannot use the following functions: – White balance – Fader – Digital effect – PROGRAM AE – Manual exposure – Flexible Spot Meter – Progressive Recording Mode – Recording with the flash When the POWER switch is set to MEMORY You cannot use the following functions: – Super NightShot – Color Slow Shutter NightShot Light The NightShot Light rays are infrared and so are invisible. The maximum shooting distance using the NightShot Light is about 3 m (10 feet).
Checking recordings – End search/Edit search/Rec Review You can use these buttons to check the recorded picture or shoot so that the transition between the last recorded scene and the next scene you record is smooth. FN Recording – Basics EDITSEARCH End search You can go to the end of the recorded section after you record. (1) Set the POWER switch to CAMERA. (2) Press FN to display PAGE1. (3) Press END SCH.
Checking recordings – End search/Edit search/Rec Review Edit search You can search for the next recording start point. You cannot monitor the sound. (1) Set the POWER switch to CAMERA. (2) Hold down the EDITSEARCH. The recorded portion is played back. Release EDITSEARCH to stop playback. If you press START/STOP, recording begins from the point you released EDITSEARCH. 7 – : To go backwards + : To go forwards Rec Review You can check the last recorded section. (1) Set the POWER switch to CAMERA.
— Playback – Basics — Playing back tape You can monitor the recorded tape on the LCD screen. If you close the LCD panel, you can monitor the playback picture in the viewfinder. You can also control playback using the Remote Commander supplied with your camcorder. Press the POWER switch to VCR while pressing the small green button. Press OPEN to open the LCD panel. to rewind the tape. Press to start playback. Press Adjust the volume following the steps below. 1 Press FN to display PAGE1. 2 Press VOL.
Playing back tape To return to FN Press EXIT. To cancel playback Press . To rewind the tape Press during playback stop. To fastforward the tape Press during playback stop. To view a still image (playback pause) Press during playback. To resume playback, press again. If you leave the power on for a long time Your camcorder gets warm. This is not a malfunction.
Playing back tape About date/time and various settings Your camcorder automatically records not only images on the tape but also the recording data (date/time or various settings when recorded) (Data code). Follow the steps below to display the data code using the touch panel or the Remote Commander. Using the touch panel Set the POWER switch to VCR, then play back the tape. During playback, press FN and select PAGE2. Press DATA CODE. OK. Select CAM DATA or DATE DATA, then press Press EXIT.
Playing back tape Various playback modes To operate video control buttons, set the POWER switch to VCR. Using the touch panel (1) Press FN and select PAGE3. (2) Press V SPD PLAY to display video control buttons. To change the playback direction Press during playback to reverse the playback direction.1) To locate a scene while monitoring the picture (picture search) Keep pressing button. or during playback.
Playing back tape Video control buttons Marks on your camcorder are different from those on the Remote Commander supplied with your camcorder.
Viewing a recording on TV Connect your camcorder to a TV with the A/V connecting cable supplied with your camcorder to watch the playback pictures on the TV screen. You can operate the playback control buttons in the same way as when you view playback pictures on the LCD screen. When viewing the playback picture on the TV screen, we recommend that you power your camcorder from a wall outlet using the AC Adaptor. Refer to the operating instructions of your TV. Open the jack cover.
Viewing a recording on TV If the device you want to connect to has an S video jack •Pictures can be reproduced more faithfully by using an S video cable (optional). With this connection, you do not need to connect the yellow (video) plug of the A/V connecting cable. Connect the S video cable (optional) to the S video jacks on both your camcorder and the device you want to connect to. This connection produces higher quality DV format pictures.
— Advanced Recording Operations — Recording still images on “Memory Stick” during tape recording standby or tape recording During tape recording standby The POWER switch should be set to . (1) Keep pressing PHOTO lightly until a still image appears. The CAPTURE indicator appears. Recording does not start yet. To change the still image, release PHOTO, select a still image again, then press and hold PHOTO lightly. (2) Press PHOTO deeply. Recording is complete when the bar scroll indicator disappears.
Recording still images on “Memory Stick” during tape recording standby or tape recording Note You cannot record still images on the “Memory Stick” during following operations indicator flashes): (The – End search – Wide mode – During fading in with BOUNCE – Progressive Recording Mode – MEMORY MIX Still images • The image size will be 640 × 480. • If the POWER switch is set to CAMERA, image quality cannot be changed. Images will be recorded with image quality as set when the POWER switch is set to MEMORY.
Self-timer recording START/STOP PHOTO PHOTO START/STOP Recording on the tape The POWER switch should be set to Operate by touching the panel. . (1) During standby, press FN and select PAGE2. (2) Press SELFTIMER. (self-timer) indicator appears on the screen. The (3) Press EXIT to return to FN. (4) Press START/STOP. The self-timer starts counting down from about 10 while beeping. In the last two seconds of the countdown, the beep gets faster, then recording starts automatically.
Adjusting the white balance manually Normally white balance is automatically adjusted. The POWER switch should be set to Operate by touching the panel. or . (1) Press FN to display PAGE1. (2) Press MENU to display the menu. , then press EXEC (p. 173). (3) Select WHT BAL in EXIT AUTO HOLD OUTDOOR INDOOR EXEC RET. (4) Select a desired mode, then press EXEC.
Using the wide mode If you move the power zoom lever to “W” side, you can record with a wider angles than normal tape recording. You can record a 16:9 wide picture to watch on the 16:9 wide-screen TV (16:9WIDE). Black bands appear on the screen during recording in the 16:9WIDE mode [a]. The picture during playing back in the 4:3 mode on a wide-screen TV [b] or a normal TV [c]* are compressed in the widthwise direction.
Using the wide mode Notes •In the wide mode, you cannot operate the following functions: – Recording still images on the “Memory Stick” during tape recording or tape recording standby – BOUNCE – OLD MOVIE – Progressive Recording Mode •Pictures recorded on the tape in wide mode cannot be returned to normal size. ID-1 system The ID-1 system sends aspect ratio information (16:9, 4:3, or letter box) with video signals.
Using the fader function You can fade in or out to give your recording a professional appearance. [a] STBY REC NORM. FADER (normal) MOSC. FADER (mosaic) BOUNCE1) 2) OVERLAP2) WIPE2) DOT2) [b] STBY REC MONOTONE When fading in, the picture gradually changes from black-and-white to color. When fading out, the picture gradually changes from color to black-and-white. 1) 2) 50 You can use BOUNCE when D ZOOM in You can fade in only. is set to OFF in the menu settings.
Using the fader function The POWER switch should be set to Operate by touching the panel. . START/STOP 2 FADER Advanced Recording Operations (1) When fading in [a] Press FN to display PAGE1 during recording standby. When fading out [b] Press FN to display PAGE1 during recording. (2) Press FADER. The screen to select the fader mode appears. (3) Press a desired mode. OK to return to PAGE1. (4) Press (5) Press EXIT to return to FN. The fader indicator you selected flashes. (6) Press START/STOP.
Using the fader function Note You cannot use the following functions while using fader. Also, you cannot use fader while using following functions: – Super NightShot – Color Slow Shutter – Digital effect – Interval Recording – Frame recording – Recording with the flash When you select OVERLAP, WIPE or DOT Your camcorder automatically stores the image recorded on the tape. As the image is being stored, the indicator becomes fast flashing, then the playback picture disappears.
Using special effects – Picture effect NEG. ART [a] : SEPIA : B&W : SOLARIZE [b] : PASTEL [c] : MOSAIC [d] : The color and brightness of the picture are reversed. The picture is sepia. The picture is monochrome (black-and-white). The picture looks like an illustration with a strong contrast. The picture looks like a pale pastel drawing. The picture is mosaic. [a] [b] [c] [d] . (1) Press FN to display PAGE1. (2) Press MENU to display the menu. , then press EXEC (p. 173).
Using special effects – Digital effect STILL You can record a still image so that it is superimposed on a moving picture. FLASH (flash motion) You can record still images successively at regular intervals. LUMI. (luminance key) You can swap the brighter area in a still image with a moving picture. TRAIL You can record a picture so that an incidental image like a trail is left. SLOW SHTR (slow shutter) You can slow down the shutter speed. The SLOW SHTR mode is good for recording dark pictures more brightly.
Using special effects – Digital effect The POWER switch should be set to Operate by touching the panel. . (1) Press FN and select PAGE2. (2) Press DIG EFFT. The screen to select a digital effect is displayed. (3) Press a desired mode. When you select STILL or LUMI., the still image is stored in memory. (4) Press – (to decrease the effect)/+ (to increase the effect) to adjust the effect.
Using special effects – Digital effect Notes •While using digital effect, you cannot use the following functions: – Super NightShot – Color Slow Shutter – Fader •PROGRAM AE does not work in the SLOW SHTR mode. •The following functions do not work in the OLD MOVIE mode: – Wide mode – Picture effect – PROGRAM AE When recording in the SLOW SHTR mode Auto focus may not be effective. Focus manually using a tripod.
Using PROGRAM AE SPOTLIGHT1) This mode prevents people’s faces, for example, from appearing excessively white when shooting subjects lit by strong light in the theater. PORTRAIT (soft portrait) This mode brings out the subject while creating a soft background for subjects such as people or flowers. SPORTS (sports lesson)1) This mode minimizes shake on fast-moving subjects such as in tennis or golf.
Using PROGRAM AE The POWER switch should be set to Operate by touching the panel. or . (1) Press FN to display PAGE1. (2) Press MENU to display the menu. , then press EXEC (p. 173). (3) Select PROGRAM AE in MANUAL SET PROGRAM AE P EFFECT RED EYE R FLASH LVL WHT BAL SHARPNESS AUTO SHTR EXIT AUTO SPOTLIGHT PORTRAIT SPORTS BEACH&SKI SUNSETMOON LANDSCAPE EXEC RET. (4) Select a desired mode, then press EXEC. To return to FN Press EXIT. To cancel PROGRAM AE Set PROGRAM AE to AUTO in the menu settings.
Adjusting the exposure manually We recommend adjusting the exposure manually in the following cases: – When the subject is backlit – When the subject is too bright against the background – When recording dark pictures (e.g. night scenes) faithfully The POWER switch should be set to Operate by touching the panel. . Press FN to display PAGE1. Press EXPOSURE. The screen to adjust the exposure appears. Press MANUAL. Adjust the exposure using – (to dim)/+ (to brighten). OK to return to PAGE1.
Using spot light-metering function – Flexible Spot Meter You can take a picture with the appropriate exposure automatically for just the point you want to focus on and with its exposure fixed. Use Flexible Spot Meter in the following cases: – The subject is backlit. – When there is strong contrast between the subject and background such as with a subject that is on stage and lit by a spotlight. The POWER switch should be set to Operate by touching the panel. or . (1) Press FN to display PAGE1.
Focusing manually The POWER switch should be set to or . Advanced Recording Operations You can gain better results by manually adjusting the focus in the following cases. Normally, focus is automatically adjusted. When the POWER switch is set to MEMORY, you can adjust the focus manually with the image enlarged to twice the size (Expanded focus).
Focusing manually To focus precisely It is easier to focus on the subject if you adjust the zoom to shoot at the “W” (wideangle) position after focusing at the “T” (telephoto) position. When you shoot close to the subject Focus at the end of the “W” (wide-angle) position.
Using spot focus function – Spot Focus You can take a picture with the appropriate focus automatically for just the point you want to focus on and with its focus fixed. The POWER switch should be set to Operate by touching the panel. or . 2 SPOT FOCUS SPOT FOCUS AUTO Advanced Recording Operations (1) Press FN to display PAGE1. (2) Press SPOT FOCUS. The SPOT FOCUS screen appears. (3) Press the desired area in the frame. The SPOT FOCUS indicator flashes on the screen.
Interval Recording You can make a time-lapse recording by setting your camcorder to automatically record and standby sequentially. You can achieve an excellent recording for flowering, emergence, etc. with this function. Example 1s [a] 1s 9 min 59 s 9 min 59 s [a] [b] [b] 10 min 10 min [a] REC TIME [b] INTERVAL There may be a discrepancy in recording time of up to +/– six frames from the selected time. The POWER switch should be set to Operate by touching the panel. .
Frame by frame recording – Frame recording You can make a recording with a stop-motion animated effect using frame recording. To create this effect, alternately move the subject a little and make frame recording. We recommend that you use a tripod, and operate your camcorder using the Remote Commander after step 6. The POWER switch should be set to Operate by touching the panel. . TAPE SET REC MODE AUD I O MODE REMAIN OFF FRAME REC ON I NT. REC EXIT EXEC RET. (4) Select ON, then press EXEC.
Recording with all the pixels – Progressive Recording Mode To import moving pictures to a computer to view still images, we recommend you record in Progressive Recording Mode. To use Progressive Recording Mode, follow the procedure below. Still images produced this way are more stable than those recorded in normal mode, and thus are more suitable for analyzing high-speed action such as sports scenes.
Using the viewfinder Turn the LCD panel over and move it back to your camcorder body with the LCD screen facing out. You can operate with the touch panel using the viewfinder. Use the viewfinder when operating camera brightness and fader on the touch panel. The POWER switch should be set to Operate by touching the panel. or . EXPOSURE: Adjust the exposure by pressing –/+. FADER: Press FADER until a desired fader mode appears. The indicator changes as follows: FADER t M.
Using the viewfinder Note When the POWER switch is set to VCR or during memory playback, you cannot operate with the touch panel using the viewfinder. To operate the items that do not appear Set the LCD panel back to the previous position. Operate the items using the LCD screen. Available recording time This is the time when you record pictures using the viewfinder (p. 17).
— Advanced Playback Operations — Playing back tape with picture effect The POWER switch should be set to Operate by touching the panel. . (1) During playback or playback pause, press FN to display PAGE1. (2) Press MENU to display the menu. , then press EXEC (p. 173). (3) Select P EFFECT in MANUAL SET P EFFECT EXIT OFF NEG. ART SEPIA B&W SOLARIZE RET. (4) Select a desired mode, then press EXEC. You can use NEG. ART, SEPIA, B&W and SOLARIZE. See page 53 for details of each mode.
Playing back tape with digital effect The POWER switch should be set to Operate by touching the panel. . (1) During playback or playback pause, press FN and select PAGE2. (2) Press DIG EFFT. The screen to select a digital effect is displayed. (3) Select a desired mode. You can use STILL, FLASH, LUMI. and TRAIL. See page 54 for details of the each mode. When you select STILL or LUMI., the picture that you select the mode to is stored in memory as a still image. (4) Press –/+ to adjust the effect.
Enlarging images recorded on tape – Tape PB ZOOM Besides the operation described here, your camcorder can enlarge still images recorded on the “Memory Stick” (p. 133). The POWER switch should be set to Operate by touching the panel. . 2 PB ZOOM Advanced Playback Operations (1) During playback or playback pause, press FN and select PAGE2. (2) Press PB ZOOM. The PB ZOOM screen appears. (3) Press the area you want to enlarge in the frame.
Quickly locating a scene – Zero set memory Your camcorder automatically searches for a desired scene having the tape counter value of “0:00:00.” Use the Remote Commander for this operation. The POWER switch should be set to . (1) During playback, press ZERO SET MEMORY on the Remote Commander at the point you want to locate later. The tape counter shows “0:00:00,” then starts counting. If the indicators do not appear, press DISPLAY. The ZERO SET MEMORY indicator flashes.
Searching the boundaries of recorded tape by title – Title search Use the cassette with Cassette Memory for this operation. Use the Remote Commander for this operation. Before operation Set CM SEARCH in to ON in the menu settings. (The default setting is ON.) The POWER switch should be set to . (2) Press . or > on the Remote Commander to select the title for playback. Your camcorder automatically starts playback of the scene having the title that you selected.
Searching a recording by date – Date search •DATE SEARCH by using Cassette Memory c Cue by selecting the recording date on the screen •DATE SEARCH without using Cassette Memory c Cue to changing point of recording date Use the Remote Commander for this operation. Searching for the date by using Cassette Memory Before operation •You can use this function only when playing back the cassette with Cassette Memory. •Set CM SEARCH in to ON in the menu settings. (The default setting is ON.
Searching a recording by date – Date search Searching for the date without using Cassette Memory The POWER switch should be set to Operate by touching the panel. . (1) Press FN to display PAGE1. (2) Press MENU to display the menu. , then press EXEC (p. 178). (3) Select CM SEARCH in EXIT ON OFF EXEC RET. (4) Select OFF, then press EXEC. (5) Press SEARCH MODE on the Remote Commander, until the DATE SEARCH indicator appears. (6) Press .
— Editing — Dubbing tape You can dub or edit on the VCR connected to your camcorder using your camcorder as a player. You can connect either the A/V connecting cable (supplied) or i.LINK cable (optional). If you connect with the i.LINK cable (optional), video and audio signals are transmitted in digital form for high-quality editing. Titles, screen indicators, Cassette Memory contents, and “Memory Stick” index screen lettering cannot be recorded.
Dubbing tape Dubbing a tape Before operation for connecting with the A/V connecting cable •Set DISPLAY in to LCD in the menu settings. (The default setting is LCD.) •Press the following buttons to make the indicator disappear so that they will not be superimposed on the edited tape: On your camcorder: DISPLAY/BATTERY INFO, DATA CODE On the Remote Commander: DISPLAY, DATA CODE, SEARCH MODE The POWER switch should be set to .
Dubbing only desired scenes – Digital program editing (on tape) You can duplicate selected scenes (programs) for editing onto the tape without operating the VCR. Scenes can be selected by frame. You can set up to 20 programs. Your camcorder can dub on the “Memory Stick.” See page 125 for details. Unwanted scene Unwanted scene Switch the order Before operating Digital program editing on the tape recorded on other equipment Step 1 Step 2 Step 3 Connecting to the VCR (p. 78). Setting the VCR to operate (p.
Dubbing only desired scenes – Digital program editing (on tape) Step 2: Setting the VCR to operate To connect using the A/V connecting cable, send the control signal by infrared rays to the remote sensor on the VCR. The POWER switch should be set to Operate by touching the panel. . 4 EXIT OTHERS DATA CODE BEEP COMMANDER D I SPL AY V I DEO ED I T RETURN TAPE MEMORY EXEC RET. V I DEO ED I T ED I T SET IR CONTROL i. L I NK ADJ TEST ”CUT - I N” ”CUT -OUT” I R SETUP PAUSEMODE I R TEST END EXEC RET.
Dubbing only desired scenes – Digital program editing (on tape) (11) Select PAUSEMODE, then press EXEC. (12) Select the mode to cancel recording pause on the VCR, then press EXEC. The correct button depends on your VCR. Refer to the operating instructions of your VCR. 11 12 END V I DEO ED I T ED I T SET CONTROL ADJ TEST ”CUT - I N” ”CUT -OUT” I R SETUP PAUSE PAUSEMODE REC I R TEST PB EXEC V I DEO ED I T ED I T SET CONTROL ADJ TEST ”CUT - I N” ”CUT -OUT” I R SETUP PAUSEMODE PAUSE I R TEST RET.
Dubbing only desired scenes – Digital program editing (on tape) Note When you connect with an i.LINK cable, you may not be able to operate the dubbing function correctly, depending on the VCR. Set CONTROL to IR in the menu settings of your camcorder. About the IR SETUP code The IR SETUP code is stored in the memory of your camcorder. Be sure to set the correct code, depending on your VCR. Default setting is code number 3.
Dubbing only desired scenes – Digital program editing (on tape) When the VCR does not operate correctly •After checking the code in “About the IR SETUP code” (p. 81), set the IR SETUP or the PAUSEMODE again. •Place your camcorder at least 30 cm (12 in.) away from the VCR. •Refer to the operating instructions of your VCR. Step 3: Adjusting the synchronization of the VCR You can adjust the synchronization of your camcorder and the VCR. Prepare a pen and paper for notes.
Dubbing only desired scenes – Digital program editing (on tape) 2 3 V I DEO ED I T ED I T SET CONTROL ADJ TEST ”CUT - I N” ”CUT -OUT” I R SETUP PAUSEMODE I R TEST END END V I DEO ED I T ED I T SET CONTROL COMPLETE ADJ TEST ”CUT - I N” ”CUT -OUT” I R SETUP PAUSEMODE I R TEST RETURN EXECUTE ENGAGE REC PAUSE EXEC RET. EXEC RET. 8 6 END 0 EXEC V I DEO ED I T ED I T SET CONTROL ADJ TEST ”CUT - I N” ”CUT -OUT” I R SETUP PAUSEMODE I R TEST RET.
Dubbing only desired scenes – Digital program editing (on tape) Operation 1: Making a Program The POWER switch should be set to Operate by touching the panel. . (1) Insert the cassette for playback into your camcorder, and insert the tape for recording into the VCR. (2) Press FN to display PAGE1. (3) Press MENU to display the menu. , then press EXEC (p. 182). (4) Select VIDEO EDIT in (5) Select TAPE, then press EXEC.
Dubbing only desired scenes – Digital program editing (on tape) Note You cannot operate recording during Digital program editing. On a blank portion of the tape You cannot set IN or OUT. If there is a blank portion between the IN point and the OUT point on the tape The total time may not be displayed correctly. Erasing the program you have set Erase OUT mark first, and then IN mark of the last set program. Editing (1) Press UNDO. (2) Press ERASE 1 MARK.
Dubbing only desired scenes – Digital program editing (on tape) Operation 2: Performing Digital program editing (Dubbing the tape) (1) When you use a digital video camera recorder, set the power switch of VCR to VCR/VTR. (2) Make sure your camcorder and the VCR are connected, and that the VCR is set to recording pause. When you use an i.LINK cable the following procedure is not necessary. (3) Press FN to display PAGE1. (4) Press MENU to display the menu. , then press EXEC (p. 182).
Recording video or TV programs You can record the tape from another VCR or a TV program from a TV that has video/ audio outputs. Use your camcorder as a recorder. You can connect either the A/V connecting cable (supplied) or i.LINK cable (optional). If you connect with the i.LINK cable (optional), video and audio signals are transmitted in digital form for high-quality editing.
Recording video or TV programs Recording video or TV programs Before operation for connecting with the A/V connecting cable Set DISPLAY in to LCD in the menu settings when using the A/V connecting cable. (The default setting is LCD.) The POWER switch should be set to Operate by touching the panel. . (1) Insert the blank tape (or the tape you want to record over) into your camcorder. If you are recording the tape from the VCR, insert the recorded tape into the VCR. (2) Press FN and select PAGE3.
Inserting a scene from a VCR – Insert editing You can insert a new scene with sound from a VCR onto the originally recorded tape by specifying the insert start and end points. Use the Remote Commander for this operation. Connections are the same as on page 87. Insert a cassette containing the desired scene to insert into the VCR.
Inserting a scene from a VCR – Insert editing 3 ZERO SET MEMORY 0:00:00 ZERO SET MEMORY To change the insert end point Press ZERO SET MEMORY on the Remote Commander again after step 4 to erase the ZERO SET MEMORY indicator and begin from step 2. Using the Remote Commander In step 5 to 7, press z REC and MARK simultaneously, then immediately press X. In step 8, press X at the scene where you want to start recording from. To insert a scene without setting the insert end point Skip step 2 and 3.
Audio dubbing You can record additional audio to the original sound on the tape by connecting audio equipment or a microphone. If you connect the audio equipment, you can add sound to the tape already recorded in the 12-bit mode by specifying starting and ending points. The original sound will not be erased.
Audio dubbing Connecting the microphone (optional) to the intelligent accessory shoe Install the Microphone after removing the shoe cover. Shoe cover Intelligent accessory shoe Microphone (optional) Connecting the A/V connecting cable to the AUDIO/VIDEO jack Audio equipment AUDIO L LINE OUT R L White Do not connect the video (yellow) plug.
Audio dubbing Adding an audio sound on the recorded tape Choose a connection mentioned on page 91, and connect audio equipment or microphone to your camcorder. Then follow the procedure below using the touch panel or the Remote Commander supplied with your camcorder. Using the touch panel The POWER switch should be set to Operate by touching the panel. . Editing (1) Insert the recorded tape into your camcorder. to start playing back. To pause (2) Locate the recording start point.
Audio dubbing You cannot audio dubbing in the following cases: •The tape recorded in the 16-bit mode •The tape recorded in the LP mode •Connecting with the DV Interface •The blank portions of the tape •The cassette set the write-protect tab to lock To add new sound more precisely Press ZERO SET MEMORY at the point where you want to stop recording later during playback. Follow the step 2 in “Using the touch panel.” Recording automatically stops at the point where ZERO SET MEMORY was pressed.
Superimposing a title on a cassette with Cassette Memory VACATION One cassette can have up to about 20 titles, if one title consists of five characters. However, if the Cassette Memory is full with date and cassette label data, one cassette can have only up to about 11 titles with five characters each. Cassette Memory capacity is as follows: – Six date data (maximum) – One cassette label (maximum) or . Editing The POWER switch should be set to Operate by touching the panel.
Superimposing a title on a cassette with Cassette Memory To use the custom title If you want to use the custom title, select in step 5. The titles superimposed with your camcorder •They appear only by DV format video equipment with index titler function. •The point you superimposed the title may be detected as an index signal when searching a recording with other video equipment. To not display title Set TITLE DSPL to OFF in the menu settings (p. 178).
Making your own titles You can make up to two titles and store them in the memory of your camcorder. Each title can have up to 20 characters. The POWER switch should be set to Operate by touching the panel. or . (1) (2) (3) (4) (5) (6) 4 5 TITLE SET CUSTOM1 SET CUSTOM2 SET r R EXIT EXEC 7 TITLE SET EXIT [____________________] t &? ! ABC DEF T RET. Editing Press FN to display PAGE1. Press MENU to display the menu. , then press EXEC (p. 178). Select TITLE in , then press EXEC.
Labeling a cassette on a cassette with Cassette Memory The label can consist of up to 10 characters and are stored in Cassette Memory. When you insert the labeled cassette with the POWER switch set to CAMERA, or the POWER switch is set to VCR, the label is displayed for about five seconds. The POWER switch should be set to Operate by touching the panel. or . (1) (2) (3) (4) Insert the cassette with Cassette Memory you want to label. Press FN to display PAGE1. Press MENU to display the menu.
Erasing all the data in Cassette Memory The following data saved in Cassette Memory can be completely erased once: – Date data – Title data – Cassette label The POWER switch should be set to Operate by touching the panel. or . (1) (2) (3) (4) 3 Editing Press FN to display PAGE1. Press MENU to display the menu. , then press EXEC (p. 178). Select ERASE ALL in Select OK, then press EXEC. The OK indicator changes to EXECUTE. (5) Select EXECUTE, then press EXEC. The ERASING indicator flashes on the screen.
— “Memory Stick” Operations — Using “Memory Stick” – Introduction The “Memory Stick” is a new light and small recording media which, despite of the size, can store greater data than a floppy disk.
Using “Memory Stick” – Introduction Image data may be damaged in the following cases. Damaging image data is not guaranteed – If you eject the “Memory Stick” or turn off your camcorder while reading the image file from the “Memory Stick” or recording data onto the “Memory Stick” (while the access lamp is lit or flashing). – If you use the “Memory Stick” near magnets or magnetic fields such as those of speakers and TV. We recommend backing up important data on the hard disk of a computer.
Using “Memory Stick” – Introduction •The “Memory Stick,” and “MagicGate Memory Stick” are trademarks of Sony Corporation. •“Memory Stick Duo” and are trademarks of Sony Corporation. •“MagicGate” and are trademarks of Sony Corporation. •All other product names mentioned herein may be the trademarks or registered trademarks of their respective companies. Furthermore, “™” and “®” are not mentioned in each case in this manual.
Selecting the quality and size of image data Selecting still image quality The default setting is FINE. The POWER switch should be set to Operate by touching the panel. (1) (2) (3) (4) (5) or . Press FN to display PAGE1. Press MENU to display the menu. , then press EXEC (p. 176). Select STILL SET in Select QUALITY, then press EXEC. Select a desired image quality, then press EXEC. 3 4 EXIT OFF MEM SET 1 STILL SET BURST QUALITY IMAGESIZE EXIT FINE STANDARD REMAIN 12 EXEC RET. EXEC RET.
Selecting the quality and size of image data Selecting the still image size You can select image size 1600 × 1200 or 640 × 480 (When the POWER switch is set to CAMERA or VCR, the image size is automatically set to 640 × 480.). The default setting is 1600 × 1200. The POWER switch should be set to Operate by touching the panel. (1) (2) (3) (4) (5) . Press FN to display PAGE1. Press MENU to display the menu. , then press EXEC (p. 176). Select STILL SET in Select IMAGESIZE, then press EXEC.
Selecting the quality and size of image data Selecting the moving picture size You can select picture size 320 × 240 or 160 × 112. The default setting is 320 × 240. The POWER switch should be set to Operate by touching the panel. (1) (2) (3) (4) (5) or . Press FN to display PAGE1. Press MENU to display the menu. , then press EXEC (p. 176). Select MOVIE SET in Select IMAGESIZE, then press EXEC. Select a desired image size, then press EXEC.
Selecting the quality and size of image data Approximate number of still images and time of moving pictures that can be recorded on one “Memory Stick” The number of still images and the time of moving pictures you can record vary depending on which image quality mode you select and the complexity of the subject.
Recording still images on “Memory Stick” – Memory Photo recording The POWER switch should be set to . (1) Keep pressing PHOTO lightly and check the image. The green z indicator stops flashing, then lights up. The brightness of the image and the focus are adjusted and fixed while your camcorder targets at the middle of the image. Recording does not start yet. (2) Press PHOTO deeply. Recording is complete when the bar scroll indicator disappears.
Recording still images on “Memory Stick” – Memory Photo recording You can record still images on the “Memory Stick” during tape recording or tape recording standby See page 44 for details. When the POWER switch is set to MEMORY The following functions do not work: – Digital zoom – Super NightShot – Color Slow Shutter – Wide mode – Fader – Picture effect – Digital effect – SPORTS of PROGRAM AE (The indicator flashes.
Recording still images on “Memory Stick” – Memory Photo recording Recording images continuously You can record still images continuously. Before recording, select a desired mode described below in the menu settings. NORMAL [a] ( ) Your camcorder shoots up to four still images in 1600 × 1200 size or 25 still images in 640 × 480 size at about 0.5 sec intervals. HIGH SPEED [a] ( ) Your camcorder shoots up to 32 still images in 640 × 480 size at about 0.07 sec intervals.
Recording still images on “Memory Stick” – Memory Photo recording The number of still images in continuous shooting The number of still images you can shoot continuously varies depending on the image size and the capacity of the “Memory Stick.” During continuous recording of images The flash does not work. When shooting with the self-timer or the Remote Commander Your camcorder automatically records up to the maximum number of still images. When selecting HIGH SPEED Flickering or changes in color may occur.
Recording still images on “Memory Stick” – Memory Photo recording Recording images with the flash The POWER switch should be set to or . If you press PHOTO, the flash automatically pops up to strobe. The default setting is auto (no indicator). To change the flash mode, press (flash) repeatedly until the flash mode indicator appears on the screen. You cannot use this function during recording moving pictures. (flash) When you set RED EYE R in changes as follows: t t to ON in the menu settings (p.
Recording still images on “Memory Stick” – Memory Photo recording Notes •Clean any dirt from the flash surface before use. With the heat from the flash firing, dirt can cause discoloration or stick to the flash surface so that the flash does not give off a sufficient amount of light. •The recommended shooting distance using the built-in flash is 0.3 m to 2.5 m (31/32 feet to 8 1/3 feet). •Attaching the lens hood (supplied) or a conversion lens (optional) causes lens shadow to appear.
Recording still images on “Memory Stick” – Memory Photo recording Shooting with an auxiliary light – HOLOGRAM AF The POWER switch should be set to . The HOLOGRAM AF is an auxiliary light source used for focusing on subjects in dark places. Set HOLOGRAM F in to AUTO in the menu settings. (The default setting is AUTO.) appears on the screen in a dark place, press PHOTO lightly. Then the When auxiliary light will automatically emit until the subject is focused.
Recording an image from tape as a still image Your camcorder can read moving picture data recorded on a tape and record it as a still image on the “Memory Stick.” Image size is automatically set to 640 × 480. Before operation Insert the “Memory Stick” and the recorded tape into your camcorder. The POWER switch should be set to Operate by touching the panel. . (1) Press . The picture recorded on the tape is played back. (2) Keep pressing PHOTO lightly and check the image.
Recording an image from tape as a still image Recording a still image from other equipment You can use either A/V connecting cable or i.LINK cable. Connect the devices as illustrated on page 87. When connecting with the A/V connecting cable, set DISPLAY in to LCD in the menu settings. (The default setting is LCD.) The POWER switch should be set to . (1) Play back the recorded tape, or turn the TV on to see a desired program.
Superimposing a still image in “Memory Stick” on an image – MEMORY MIX You can superimpose a still image you have recorded on the “Memory Stick” on top of the moving picture you are recording. (However you cannot superimpose a still image onto the moving picture you have finished recording.) You can record the superimposed images on the tape or the “Memory Stick.” (However, you can record only superimposed still images on the “Memory Stick.”) M.
Superimposing a still image in “Memory Stick” on an image – MEMORY MIX The “Memory Stick” supplied with your camcorder stores 20 images: – For M. CHROM: 18 images (such as a frame) 101-0001 to 101-0018 – For C. CHROM: two images (such as a background) 101-0019 to 101-0020 Sample images Sample images stored in the “Memory Stick” supplied with your camcorder are protected (p. 135). Notes •You cannot use MEMORY MIX for moving pictures recorded on the “Memory Stick.
Superimposing a still image in “Memory Stick” on an image – MEMORY MIX 2 4 MEM MIX MEM MIX MEM MIX OFF MCCAM OVER– LUMI LAP OFF OK CAMCM MCCAM CHROM CHROM Still image M. LUMI 101 101–0001 – OK + – 101 + 101–0001 – + To change the still image to be superimposed Press –/+ in the lower right corner before step 5. To cancel MEMORY MIX Press OFF to return to PAGE2. Note During recording you cannot reselect the mode. Press OFF to return to PAGE2. When you select M.
Interval Photo Recording You can carry out a time-lapse recording by setting the camcorder to automatically record still images. Example [a] [a] [b] [a] [b] [a] Memory Photo recording [b] INTERVAL 10min The POWER switch should be set to Operate by touching the panel. . Press FN to display PAGE1. Press MENU to display the menu. , then press EXEC (p. 177). Select INT. R -STL in Select SET, then press EXEC. Select INTERVAL, then press EXEC. Select a desired interval time, then press EXEC. RET.
Recording moving pictures on “Memory Stick” – MPEG MOVIE recording The picture and sound are recorded up to the full capacity of the “Memory Stick” (MPEG MOVIE EX). The POWER switch should be set to . Press START/STOP Your camcorder starts recording. The camera recording lamp located on the front of your camcorder lights up. The picture and sound are recorded up to the capacity of the “Memory Stick.” See page 106 for details of recording time.
Recording moving pictures on “Memory Stick” – MPEG MOVIE recording Note Sound is recorded in monaural. When the POWER switch is set to MEMORY The following functions do not work: – Digital zoom – Super NightShot – Color Slow Shutter – Wide mode – Fader – Picture effect – Digital effect – SPORTS of PROGRAM AE (The indicator flashes.) – Title – SteadyShot Recording date/time The date/time do not appear during recording. However, they are automatically recorded onto the “Memory Stick.
Self-timer recording You can record still images and moving pictures on the “Memory Stick” with the selftimer. You can also use the Remote Commander for this operation. START/STOP PHOTO PHOTO START/STOP Recording a still image The POWER switch should be set to Operate by touching the panel. . (1) Press FN and select PAGE2. (2) Press SELFTIMER. (self-timer) indicator appears on the screen. The (3) Press EXIT to return to FN. (4) Press PHOTO deeply.
Recording a picture from tape as a moving picture Your camcorder can read moving picture data recorded on a tape and record it as a moving picture on the “Memory Stick.” Before operation Insert the recorded tape into your camcorder. The POWER switch should be set to Operate by touching the panel. . (1) Press . The picture recorded on the tape is played back. again to pause playback at the scene where you want to start (2) Press recording from. (3) Press START/STOP.
Recording a picture from tape as a moving picture Recording a moving picture from other equipment You can use either A/V connecting cable or i.LINK cable. Connect the devices as illustrated on page 87. When connecting with the A/V connecting cable, set DISPLAY in to LCD in the menu settings. (The default setting is LCD.) The POWER switch should be set to . (1) Play back the recorded tape on the VCR, or turn the TV on to see a desired program.
Recording edited pictures from tape as a moving picture – Digital program editing (on “Memory Stick”) You can duplicate selected scenes (programs) for editing onto the “Memory Stick.” Making the program The POWER switch should be set to Operate by touching the panel. . 4 5 EXIT OTHERS DATA CODE BEEP COMMANDER DISPLAY V I DEO ED I T RETURN TAPE MEMORY EXEC V I DEO ED I T 320 MARK IN START 0:32:30:14 15sec UNDO IMAGE SIZE TOTAL 0:00:00 SCENE 0 RET.
Recording edited pictures from tape as a moving picture – Digital program editing (on “Memory Stick”) Performing the program (Dubbing the “Memory Stick”) The POWER switch should be set to Operate by touching the panel. (1) (2) (3) (4) (5) (6) . Press FN to display PAGE1. Press MENU to display the menu. , then press EXEC (p. 182). Select VIDEO EDIT in Select MEMORY, then press EXEC. Press START. Press EXEC. Your camcorder searches for the beginning of the first program, then starts dubbing.
Changing the recording folder You can create folders up to “999MSDCF” in the “Memory Stick.” The default setting is “101MSDCF” folder to record. Creating a new folder The POWER switch should be set to Operate by touching the panel. . (1) Press FN to display PAGE1. (2) Press MENU to display the menu. , then press EXEC (p. 176). (3) Select NEW FOLDER in EXIT MEM SET 1 STILL SET MOVIE SET NEW FOLDER ADD REC FOLDER RETURN FILE NO. ADD FOLDER 102MSDCF RET. (4) Select ADD, then press EXEC.
Viewing a still image – Memory Photo playback You can play back still images recorded on the “Memory Stick.” You can also play back six images including moving pictures at a time arranged in the same order of recording on the “Memory Stick” by selecting the index screen. You can also use the Remote Commander for this operation. The POWER switch should be set to Operate by touching the panel. . (1) Press PLAY. The last recorded image is displayed.
Viewing a still image – Memory Photo playback Playing back six recorded images at a time (index screen) This function is especially useful when searching for a particular image. Press INDEX to display the index screen A red B mark appears above the image that appears before changing to the index screen mode.
Viewing a moving picture – MPEG MOVIE playback You can play back moving pictures recorded on the “Memory Stick.” You can also play back six images including still images in order of recording on the “Memory Stick” at a time by selecting the index screen. The POWER switch should be set to Operate by touching the panel. . (1) Press PLAY. The last recorded image appears. (2) Press – (to see the previous picture)/+ (to see the next picture) to select a desired moving picture.
Viewing a moving picture – MPEG MOVIE playback Playback picture from desired part The moving picture recorded on the “Memory Stick” is divided into parts. It is divided into a maximum of 60. You can select every each one point and playback pictures. The POWER switch should be set to Operate by touching the panel. . (1) Follow the step 1 and 2 on page 130. (2) Press < (to see previous part)/, (to see next part) to select the point where you want to play back.
Choosing playback folder You can change the folder currently chosen for playback. The currently chosen folder is displayed in the upper right on the screen. The POWER switch should be set to Operate by touching the panel. . (1) Press FN to display to PAGE1. (2) Press PB FOLDR. (3) Press –/+ to select the folder number you want to play back, then press END to return to PAGE1.
Enlarging still images recorded on “Memory Stick” – Memory PB ZOOM You can enlarge still images recorded on the “Memory Stick.” The POWER switch should be set to Operate by touching the panel. . (1) (2) (3) (4) Power zoom lever 3 PB ZOOM PB ZOOM MEMORY PLAY END “Memory Stick” Operations Play back the image to enlarge in the frame. Press FN and select PAGE2. Press PB ZOOM. The PB ZOOM screen appears. Press the area you want to enlarge in the frame.
Playing back images continuously – Slide show You can play back all the images in the “Memory Stick” or in the specified folder using slide show. The POWER switch should be set to Operate by touching the panel. . (1) Press FN to display PAGE1. (2) Press MENU to display the menu. , then press EXEC (p. 177). (3) Select SLIDE SHOW in EXIT MEM SET 2 SLIDE SHOW RETURN INT. R –STL ALL FILES DELETE ALL FOLDER 101 FORMAT r R EXEC RET. (4) Select ALL FILES or FOLDER sss*, then press EXEC.
Preventing accidental erasure – Image protection To prevent accidental erasure of important images, you can protect selected images. The POWER switch should be set to Operate by touching the panel. . (1) Press INDEX to display the index screen. (2) Press - MARK. The screen to protect the image appears. (3) Press the image you want to protect. The - indicator appears above the protected image. 1 2,3 RET.
Deleting images – DELETE You can delete all images or selected images. Deleting selected images The POWER switch should be set to Operate by touching the panel. (1) (2) (3) (4) . Play back the image you want to delete. Press FN to display PAGE1. Press DEL. The DELETE? indicator appears on the screen. Press OK. The selected image is deleted. 3 DELETE 101–0003 DEL 3/40 101 DELETE? OK CAN– CEL To return to FN Press EXIT. To cancel deleting an image Press CANCEL in step 4.
Deleting images – DELETE Deleting selected images on the index screen The POWER switch should be set to Operate by touching the panel. . (1) Press INDEX to display the index screen. (2) Press DEL. Then press the image you want to delete. The number of the selected image is highlighted. (3) Press EXEC. The DELETE? indicator appears on the screen. (4) Press OK. The selected images are deleted. 1 2 RET.
Deleting images – DELETE Deleting all the images You can delete all the unprotected images in the “Memory Stick.” The POWER switch should be set to Operate by touching the panel. . (1) Press FN to display PAGE1. (2) Press MENU to display the menu. , then press EXEC (p. 177). (3) Select DELETE ALL in MEM SET 2 EXIT SLIDE SHOW INT. R –STL DELETE ALL RETURN FORMAT ALL FILES FOLDER 101 r R EXEC RET. (4) Select ALL FILES or FOLDER sss*, then press EXEC.
Changing image size – Resize You can change the image size of recorded still images to 640 × 480 or 320 × 240. Reducing the image size is convenient for use in attachments to e-mail. The original image is retained even after resizing. The POWER switch should be set to Operate by touching the panel. . (1) During memory playback, press FN and select PAGE2. (2) Press RESIZE. The RESIZE screen appears.
Writing a print mark – Print mark This function is useful for printing out still images later. (You cannot specify the number for printouts.) Your camcorder conforms with the DPOF (Digital Print Order Format) standard for specifying the still images to print out. The POWER switch should be set to Operate by touching the panel. . (1) Press INDEX to display the index screen. (2) Press MARK. The screen to write a print mark appears. (3) Press the image you want to write a print mark.
— Viewing images with a computer — Viewing images with a computer – Introduction There are following ways of connecting your camcorder to a computer in order to view images saved on the “Memory Stick” or recorded on the tape on a computer. To view images on a computer which has a Memory Stick slot, first eject the “Memory Stick” from your camcorder, then insert it into your computer’s Memory Stick slot.
Viewing images with a computer – Introduction When connecting to a computer with the DV port The computer must have a DV port and editing software installed that can read video signals. DV Interface i.LINK : Signal flow i.LINK cable (optional) Viewing images recorded on the “Memory Stick” When connecting to a computer with the USB port See page 144 when using Windows and page 164 when using Macintosh.
Viewing images with a computer – Introduction Notes on using a computer “Memory Stick” •“Memory Stick” operations on your camcorder cannot be assured if the “Memory Stick” formatted on a computer is used on your camcorder, or if the “Memory Stick” in your camcorder was formatted from the computer when the USB cable was connected. •Do not compress the data on the “Memory Stick.” Compressed files cannot be played back on your camcorder.
Connecting your camcorder to a computer using the USB cable (For Windows users) Complete installation of the USB driver before connecting your camcorder to a computer. If you connect your camcorder to a computer first, you will not be able to install the USB driver correctly. When connecting to a computer with the USB port You must install a USB driver onto the computer in order to connect your camcorder to the computer’s USB port.
Connecting your camcorder to a computer using the USB cable (For Windows users) Recommended computer usage environment when connecting with USB cable and viewing the “Memory Stick” images on a computer Recommended Windows environment OS: Microsoft Windows 98, Windows 98SE, Windows Me, Windows 2000 Professional, Windows XP Home Edition or Windows XP Professional Standard installation is required. However, operation is not assured if the above environment is an upgraded OS.
Connecting your camcorder to a computer using the USB cable (For Windows users) Installing the USB driver Start the following operation without connecting the USB cable to the computer. Connect the USB cable according to “Making the computer recognize your camcorder.” If you are using Windows 2000, log in with permission of administrators. If you are using Windows XP, log in with permission of computer administrators. (1) Turn on a computer and allow Windows to load.
Connecting your camcorder to a computer using the USB cable (For Windows users) Installing Image Transfer Make sure USB driver installation is complete. This function enables image data recorded on the “Memory Stick” to be automatically transferred (copied) to a computer. If you are using Windows 2000, log in with permission of administrators. If you are using Windows XP, log in with permission of computer administrators. (1) Turn on the computer and allow Windows to load.
Connecting your camcorder to a computer using the USB cable (For Windows users) Installing ImageMixer Make sure USB driver installation is complete. “ImageMixer Ver.1.5 for Sony” is an application that can capture or edit images, or create video CDs. To install and use this software in Windows 2000, you must be authorized as administrators. For Windows XP, you must be authorized as computer administrators. (1) Turn on a computer and allow Windows to load.
Connecting your camcorder to a computer using the USB cable (For Windows users) MEMORY MIX album Once “ImageMixer” is installed, the MEMORY MIX album is created in “Album” of “ImageMixer” and sample images are stored in there. Those sample images can be transferred from the MEMORY MIX album to a “Memory Stick” so that they can be used in MEMORY MIX (p. 116). Refer to the on-line help for details on the operation procedure.
Connecting your camcorder to a computer using the USB cable (For Windows users) Viewing images recorded on the “Memory Stick” (1) Insert the “Memory Stick” into your camcorder. (2) Connect the AC Adaptor, then set the POWER switch to MEMORY. (3) Connect the (USB) jack on your camcorder to the USB port on the computer using the supplied USB cable. The USB MODE indicator appears on the LCD screen of your camcorder. The computer recognizes your camcorder, and the Add Hardware Wizard starts.
Connecting your camcorder to a computer using the USB cable (For Windows users) If you cannot install the USB driver The USB driver has been registered incorrectly as a computer was connected to your camcorder before installation of the USB driver was complete. Follow the procedure below to correctly install the USB driver. Viewing pictures recorded on the tape Step 1: Uninstall the incorrect USB driver 1 Turn on the computer and allow Windows to load.
Connecting your camcorder to a computer using the USB cable (For Windows users) Windows 2000 Windows XP 6 Set the POWER switch to OFF (CHG) on your camcorder, then disconnect the USB cable. 7 Restart the computer. Step 2: Install the USB driver on the supplied CD-ROM Follow the entire procedure in “Installing the USB driver” on page 146.
Connecting your camcorder to a computer using the USB cable (For Windows users) Viewing images recorded on the “Memory Stick” Step1: Uninstall the incorrect USB driver Turn on the computer and allow Windows to load. Insert the “Memory Stick” into your camcorder. Connect the AC Adaptor, then set the POWER switch to MEMORY. Connect the USB port on the computer to the (USB) jack on your camcorder using the USB cable supplied. 5 Open the computer’s “Device Manager.” 1 2 3 4 6 Select “Other devices.
Viewing pictures recorded on tape on a computer – USB Streaming (For Windows users) Capturing images with “ImageMixer Ver.1.5 for Sony” You need to install the USB driver and ImageMixer to view pictures recorded on the tape on a computer (p. 146, 148). Viewing pictures recorded on the tape (1) (2) (3) (4) (5) (6) (7) (8) Turn on the computer and allow Windows to load. Connect the AC Adaptor, then insert the cassette into your camcorder. Set the POWER switch to VCR. Press FN to display PAGE1.
Viewing pictures recorded on tape on a computer – USB Streaming (For Windows users) (11) Connect the (USB) jack on your camcorder to the USB port on the computer using the supplied USB cable. (USB) jack USB port USB cable (supplied) to start playback. (12) Click You can control video operations with the buttons on the screen. The picture from the tape appears on the monitor window on the computer.
Viewing pictures recorded on tape on a computer – USB Streaming (For Windows users) Capturing still images Monitor window (1) Click Thumbnail list window . (2) Looking at the monitor window, move the cursor to point you want to capture. The still image on the screen is captured. Captured images appear in the thumbnail list window. and click it at the Capturing moving pictures Monitor window Thumbnail list window Video control buttons (1) Click . (2) Click to start playback.
Viewing pictures recorded on tape on a computer – USB Streaming (For Windows users) To close “ImageMixer” Click in the upper right corner of the screen. If image data cannot be transferred by the USB connection The USB driver has been registered incorrectly as the computer was connected to your camcorder before installation of the USB driver was complete. Reinstall the USB driver following the procedure on page 151. If any trouble occurs Close all running applications, then restart the computer.
Viewing pictures recorded on tape on a computer – USB Streaming (For Windows users) Making Video CDs – Easy Video CD This function makes it simple to create a video CD by capturing images recorded on a tape or images live from your camcorder. Capturing images recorded on a tape onto a CD-R (1) Follow the step 1 to 8 on page 154. after choosing the point on the tape from which you want to (2) Press capture images onto the CD-R. .
Viewing pictures recorded on tape on a computer – USB Streaming (For Windows users) Capturing images live from your camcorder onto a CD-R Eject the cassette before operation. Your camcorder automatically turns off after about five minutes if the cassette is inserted. (1) (2) (3) (4) Follow the step 1 and 2 on page 154. Set the POWER switch to CAMERA on your camcorder. Follow the step 4 to 8 on page 154. Follow the step 3 to 7 in “Capturing images recorded on a tape onto a CD-R.
Viewing pictures recorded on tape on a computer – USB Streaming (For Windows users) Seeing the on-line help (operating instructions) of ImageMixer A “ImageMixer Ver.1.5 for Sony” on-line help site is available where you can find the detailed operating method of “ImageMixer Ver.1.5 for Sony.” (1) Click located in the upper-right corner of the screen. The ImageMixer’s Manual screen appears. (2) You can find the information you need from the list of contents.
Viewing images recorded on “Memory Stick” on a computer (For Windows users) The image data recorded on the “Memory Stick” is automatically transferred (copied) to a computer with Image Transfer. You can view images with ImageMixer. You need to install the USB diver, Image Transfer and ImageMixer to view the “Memory Stick” images on a computer (p. 146 to 148). (1) Turn on the computer and allow Windows to load. (2) Insert the “Memory Stick” into your camcorder, then connect the AC Adaptor to your camcorder.
Viewing images recorded on “Memory Stick” on a computer (For Windows users) Viewing images without Image Transfer Before operation •You need to install the USB driver to view the “Memory Stick” images on a computer (p. 146). •An application such as Windows Media Player must be installed to play back moving pictures in Windows environment. (1) Turn on the computer and allow Windows to load. (2) Insert the “Memory Stick” into your camcorder, then connect the AC Adaptor to your camcorder.
Viewing images recorded on “Memory Stick” on a computer (For Windows users) Image file storage destinations and image files Image data recorded with your camcorder is stored in a folder in the “Memory Stick.” The meanings of the file names are as follows. ssss stands for any number within the range from 0001 to 9999. Example: For Windows Me users (The drive recognizing your camcorder is [F:].
Connecting your camcorder to a computer using the USB cable (For Macintosh users) When connecting to a computer with the USB cable You must install a USB driver onto a computer in order to connect your camcorder to the computer’s USB port. The USB driver can be found on the CD-ROM supplied, along with the application software required for viewing images. Recommended Macintosh environment Mac OS 8.5.1/8.6/9.0/9.1/9.2 or Mac OS X (v10.0/v10.1/v10.2) standard installation is required.
Connecting your camcorder to a computer using the USB cable (For Macintosh users) Installing the USB driver Do not connect the USB cable to a computer before installation of the USB driver is complete. For Mac OS 8.5.1/8.6/9.0 users (1) Turn on the computer and allow the Mac OS to load. (2) Insert the supplied CD-ROM in the CD-ROM drive of the computer. The application software screen appears. (3) Select “Handycam” on the screen. The title screen appears.
Viewing images recorded on “Memory Stick” on a computer (For Macintosh users) Viewing images Before operation •You need to install the USB driver to view the “Memory Stick” images on a computer (p. 165). •QuickTime 3.0 or later must be installed to play back moving pictures. (1) Turn on the computer and allow Mac OS to load. (2) Insert the “Memory Stick” into your camcorder, then connect the AC Adaptor to your camcorder. (3) Set the POWER switch to MEMORY.
Capturing images from an analog video unit on a computer – Signal convert function You can capture images and sound from an analog video unit connected to a computer which has the DV port to your camcorder. Before operation Set DISPLAY in to LCD in the menu settings. (The default setting is LCD.) The POWER switch should be set to Operate by touching the panel. (1) (2) (3) (4) (5) (6) . White Viewing images with a computer Press FN to display PAGE1. Press MENU to display the menu.
Capturing images from an analog video unit on a computer – Signal convert function Notes •You need the software and computer that support the exchange of digital video signals. •Depending on the condition of the analog video signals, the computer may not be able to output the images correctly when you convert video signals into digital video signals via your camcorder. Depending on the analog video unit, the image may contain noise or incorrect colors.
— Using the Network function — Accessing the network – DCR-TRV80 only You can access the Internet using a Bluetooth device (optional) or a dedicated accessory that serves as a USB Network Adaptor (optional) etc. Once the access is made, you can view a Web page, send/receive your e-mail, etc. This section describes only how to open the network menu. The POWER switch should be set to Operate by touching the panel. . Press NETWORK. The network menu appears.
Accessing the network How to hold your camcorder when operating network functions Hold your camcorder with your hand through the grip belt to keep from dropping it. The operation buttons needed for network functions appear on the LCD screen. Press the buttons with the stylus supplied. After using the stylus Put it back in the stylus holder. Hold the stylus correctly as illustrated and insert it until it clicks.
Using applications – DCR-TRV80 only Using your camcorder as a Remote Camera, you can operate your camcorder remotely from a computer or a PDA with Bluetooth (optional) etc. You can also transfer a still image (Image Transport) between your camcorder and a computer or a PDA with Bluetooth (optional) etc. Using as a Remote Camera The POWER switch should be set to Operate by touching the panel. . (1) Press FN and select PAGE3. (2) Press RMT CAM. Your camcorder is set to connecting standby.
— Customizing Your Camcorder — Changing the menu settings To change the mode settings in the menu settings, select the menu items with r/R . The default settings can be partially changed. First, select the icon, then the menu item and the mode. The POWER switch should be set to Operate by touching the panel. (1) (2) (3) (4) (5) (6) , or . Press FN to display PAGE1. Press MENU to display the menu. Press r/R to select a desired icon, then press EXEC. Press r/R to select a desired item, then press EXEC.
Changing the menu settings Menu items are displayed as the following icons: MANUAL SET CAMERA SET VCR SET LCD/VF SET MEM SET 1 MEM SET 2 CM SET TAPE SET SETUP MENU OTHERS Selecting the mode setting of each item z is the default setting. Menu items differ depending on the position of the POWER switch. The screen shows only the items you can operate at the moment. Mode Icon/item POWER switch Meaning MANUAL SET —— To suit your specific shooting requirement (p.
Changing the menu settings Icon/item Mode Meaning z OFF To deactivate the digital zoom. Up to 10× zoom is carried out. POWER switch CAMERA SET D ZOOM EXPANDED F 20× To activate the digital zoom. More than 10× to 20× zoom is performed digitally (p. 31). 120× To activate the digital zoom. More than 10× to 120× zoom is performed digitally. z OFF ON 16:9WIDE z OFF ON STEADYSHOT z ON OFF HOLOGRAM F z AUTO N.S.
Changing the menu settings Icon/item POWER switch Mode Meaning z STEREO To play back the stereo tape or dual sound track tape with main and sub sound (p. 195) VCR SET HiFi SOUND AUDIO MIX 1 To play back the stereo tape with the left sound or the dual sound track tape with main sound 2 To play back the stereo tape with the right sound or the dual sound track tape with sub sound —— To adjust the balance between stereo 1 and stereo 2 (p.
Changing the menu settings Icon/item Mode Meaning z OFF Not to record continuously POWER switch MEM SET 1 STILL SET BURST NORMAL To record from 4 to 25 images continuously (p. 109) HIGH SPEED To record up to 32 images continuously fast EXP BRKTG QUALITY z FINE STANDARD IMAGESIZE z 1600 × 1200 640 × 480 To record three images continuously with different exposure To record still images in the fine image quality mode (p.
Changing the menu settings Icon/item Mode POWER switch Meaning MEM SET 2 SLIDE SHOW RETURN z ALL FILES INT. R -STL To play back all the images in the playback folder you are selecting executing slide show ON To activate Interval Photo Recording (p. 119) SET FORMAT To play back all the images on the “Memory Stick” executing slide show (p.
Changing the menu settings Icon/item Mode Meaning CM SET TITLE —— To superimpose a title or make your own title (p. 95, 97) TITLEERASE —— To erase the title you have superimposed (p. 96) TITLE DSPL z ON OFF CM SEARCH TAPE TITLE ERASE ALL z ON To not display the title To search using Cassette Memory (p. 73, 74) OFF To search without using Cassette Memory —— To label the cassette (p.
Changing the menu settings Icon/item POWER switch Mode Meaning z SP To record in the SP (Standard Play) mode TAPE SET REC MODE AUDIO MODE LP To increase the recording time to 1.5 times the SP mode z 12BIT To record in the 12-bit mode (two stereo sounds) 16BIT qREMAIN z AUTO FRAME REC z OFF ON INT.
Changing the menu settings Icon/item Mode Meaning POWER switch SETUP MENU CLOCK SET USB STREAM —— z OFF ON LANGUAGE z ENGLISH To set the date or time (p.
Changing the menu settings Icon/item Mode POWER switch Meaning OTHERS DATA CODE z DATE/CAM To display date, time and various settings during (On the Remote playback when you press DATA CODE on the Commander) Remote Commander (p.
Changing the menu settings Icon/item Mode Meaning z ON To light up the camera recording lamp at the front of your camcorder POWER switch OTHERS REC LAMP OFF VIDEO EDIT z RETURN To turn the camera recording lamp off so that the person is not aware of the recording To cancel Digital program editing TAPE To make programs and perform Digital program editing on the tape (p. 78) MEMORY To make programs and perform Digital program editing on the “Memory Stick” (p.
— Troubleshooting — Types of trouble and how to correct trouble If you run into any problem using your camcorder, use the following table to troubleshoot the problem. If the problem persists, disconnect the power source and contact your Sony dealer. If “C:ss:ss” appears on the screen, the self-diagnosis display function has activated. See page 191. During recording Symptom START/STOP does not operate. The power goes off. SteadyShot does not work. The autofocusing function does not work.
Types of trouble and how to correct trouble Symptom Cause and/or Corrective Actions • If 10 minutes elapse after you set the POWER switch to CAMERA or DEMO MODE is set to ON in the menu settings without a cassette and the “Memory Stick” inserted, your camcorder automatically starts the demonstration. c Insert a cassette/the “Memory Stick” or press the LCD screen. The demonstration stops. You can also set DEMO MODE to OFF in the menu settings (p. 180).
Types of trouble and how to correct trouble During playback Symptom Cause and/or Corrective Actions • The tape has run out. c Rewind the tape (p. 38). There are horizontal lines on the • The video head may be dirty. picture or the playback picture is not c Clean the head using the cleaning cassette (optional) clear or does not appear. (p. 203). No sound or only a low sound is • The stereo tape is played back with HiFi SOUND set to 2 heard when playing back the tape. in the menu settings.
Types of trouble and how to correct trouble During recording and playback Symptom Cause and/or Corrective Actions • The battery pack is not installed, or is dead or nearly dead. c Install a charged battery pack (p. 15, 16). • The AC Adaptor is not connected to a wall outlet. c Connect the AC Adaptor to a wall outlet (p. 19). End search does not work. • The cassette was ejected after recording when using a cassette without Cassette Memory (p. 35). • You have not recorded on the new cassette yet (p. 35).
Types of trouble and how to correct trouble When operating using the “Memory Stick” Symptom Cause and/or Corrective Actions • The POWER switch is not set to MEMORY. c Set it to MEMORY (p. 107). • The “Memory Stick” is not inserted. c Insert the “Memory Stick” (p. 102). Recording does not function. • The “Memory Stick” has already been recorded to its full capacity. c Delete unnecessary images and record again (p. 136). • The “Memory Stick” formatted incorrectly is inserted.
Types of trouble and how to correct trouble Symptom You cannot write a print mark on the still image. You cannot play back images in actual size. You cannot play back image data. 188 Cause and/or Corrective Actions • The write-protect tab on the “Memory Stick” is set to LOCK. c Release the lock (p. 100). • The index screen does not appear. c Press INDEX to display the index screen, then write a print mark (p. 140). • You are trying to write a print mark on a moving picture.
Types of trouble and how to correct trouble Others Symptom Cause and/or Corrective Actions • The cassette has no Cassette Memory. c Use the cassette with Cassette Memory (p. 95). • The Cassette Memory is full. c Erase unnecessary title (p. 96). • The cassette is set to prevent accidental erasure. c Slide the write-protect tab so that red portion is not visible (p. 195). • The tape has a blank portion in the recorded portion. c Superimpose the title to the recorded position (p. 95).
Types of trouble and how to correct trouble Symptom Cause and/or Corrective Actions • Moisture condensation has occurred. c Eject the cassette and leave your camcorder for at least one hour to acclimatize (p. 202). • Some troubles have occurred in your camcorder. c Eject the cassette and insert it again, then operate your camcorder. No function works though the power c Disconnect the AC Adaptor from a wall outlet or is on. remove the battery pack, then reconnect it in about one minute. Turn the power on.
Self-diagnosis display Your camcorder has a self-diagnosis display function. This function displays the current condition of your camcorder as a 5-digit code (a combination of a letter and figures) on the LCD screen, viewfinder or display window. If a 5-digit code appears, check the following code chart. The last two digits (indicated by ss) will differ depending on the state of your camcorder.
Warning indicators If indicators appear on the screen, check the following: See the page in parentheses “( )” for details. 101-0001 Warning indicator as to file Slow flashing: • The file is corrupted. • The file is unreadable. • You are trying to carry out MEMORY MIX on moving pictures (p. 117). Warning indicator as to incompatible “Memory Stick”* Slow flashing: •An incompatible “Memory Stick” is inserted. Q C:21:00 Self-diagnosis display (p.
Warning messages If messages appear on the screen, check the following. See the page in parentheses “( )” for details. • CLOCK SET • FOR ”InfoLITHIUM” BATTERY ONLY • CLEANING CASSETTE Set the date and time (p. 20). Use an “InfoLITHIUM” battery pack (p. 197). 1) 2) Troubleshooting The video heads are dirty (p. 203). The x indicator and “ CLEANING CASSETTE“ message appear one after another on the screen. • COPY INHIBIT You tried to record a picture that has a copyright control signal (p. 194).
— Additional Information — Usable cassettes Selecting cassette types You can use the mini DV cassette only.* You cannot use any other 8 mm , Hi8 , Digital8 , VHS , VHSC , S-VHS , S-VHSC , Betamax ED Betamax , DV or MICROMV cassette. , * There are two types of mini DV cassettes: with Cassette Memory and without Cassette Memory. Cassettes with Cassette Memory have (Cassette Memory) mark. We recommend that you use cassettes with Cassette Memory. IC memory is mounted on this type of cassette.
Usable cassettes Audio mode 12-bit mode: The original sound can be recorded in stereo 1, and the new sound in stereo 2 in 32 kHz. The balance between stereo 1 and stereo 2 can be adjusted by selecting AUDIO MIX in the menu settings during playback. Both sounds can be played back. 16-bit mode: A new sound cannot be recorded but the original sound can be recorded in high quality. Moreover, it can also play back sound recorded in 32 kHz, 44.1 kHz or 48 kHz.
Usable cassettes When the Cassette Memory function does not work Reinsert a cassette. The gold-plated connector of mini DV cassettes may be dirty or dusty. Cleaning gold-plated connector If the gold-plated connector on the cassette is dirty or dusty, the remaining tape indicator sometimes does not appear correctly, and you may not be able to operate functions using Cassette Memory. Clean up the gold-plated connector with a cotton-wool swab, about every 10 times ejection of a cassette.
About the “InfoLITHIUM” battery pack This unit is compatible with the “InfoLITHIUM” battery pack (M series). Your camcorder operates only with the “InfoLITHIUM” battery pack. “InfoLITHIUM” M series battery packs have the mark. TM SERIES What is the “InfoLITHIUM” battery pack? The “InfoLITHIUM” battery pack is a lithium-ion battery pack that has functions for communicating information related to operating conditions between your camcorder and an optional AC adaptor/charger.
About the “InfoLITHIUM” battery pack How to store the battery pack •If the battery pack is not used for a long time, do the following procedure once per year to maintain proper function. 1. Fully charge the battery pack. 2. Discharge on your electronic equipment. 3. Remove the battery pack from the equipment and store it in a dry, cool place. •To use the battery pack up on your camcorder, leave your camcorder during tape recording standby until the power goes off without a cassette inserted.
About i.LINK The DV Interface on this unit is an i.LINK-compliant DV Interface. This section describes the i.LINK standard and its features. What is i.LINK? i.LINK is a digital serial interface for handling digital video, digital audio and other data in two directions between equipment having the i.LINK, and for controlling other equipment. i.LINK-compatible equipment can be connected by a single i.LINK cable. Possible applications are operations and data transactions with various digital AV equipment.
About i.LINK i.LINK functions on this unit For details on how to dub when this unit is connected to other video equipment having DV Interface, see page 76 and 87. This unit can also be connected to other i.LINK (DV Interface) compatible equipment made by Sony (e.g. VAIO series personal computer) other than video equipment. Before connecting this unit to a computer, make sure that application software supported by this unit is already installed on a computer.
Using your camcorder abroad Using your camcorder abroad Countries and areas where you can use network functions are restricted. For details, refer to the separate Network Function/Application Operating Instructions. (DCRTRV80 only) You can use your camcorder in any country or area with the AC Adaptor supplied with your camcorder within 100 V to 240 V AC, 50/60 Hz. Use a commercially available AC plug adaptor [a], if necessary, depending on the design of the wall outlet [b].
Maintenance information and precautions Moisture condensation If your camcorder is brought directly from a cold place to a warm place, moisture may condense inside your camcorder, on the surface of the tape, or on the lens. In this condition, the tape may stick to the head drum and be damaged or your camcorder may not operate correctly. If there is moisture inside your camcorder, the beep sounds and the % indicator flashes.
Maintenance information and precautions Maintenance information Cleaning the video head To ensure normal recording, clear pictures and sound, clean the video head. The video head may be dirty when: – Mosaic-pattern noise appears on the playback picture. – Playback pictures do not move. – Playback pictures do not appear or the sound breaks off. – The x indicator and “ CLEANING CASSETTE” message appear one after another or the x indicator flashes on the screen during recording.
Maintenance information and precautions Charging the built-in rechargeable battery Your camcorder has a built-in rechargeable battery so that the date, time and other settings are retained even when the POWER switch is set to OFF (CHG). The built-in rechargeable battery is always charged as long as you are using your camcorder. The battery, however, will get discharged gradually if you do not use your camcorder. It will be completely discharged in about three months if you do not use your camcorder at all.
Maintenance information and precautions Precautions Camcorder operation •Operate your camcorder on 7.2 V (battery pack) or 8.4 V (AC Adaptor). •For DC or AC operation, use the accessories recommended in this operating instructions. •If any solid object or liquid get inside the casing, unplug your camcorder and have it checked by a Sony dealer before operating it any further. •Avoid rough handling or mechanical shock. Be particularly careful of the lens.
Maintenance information and precautions AC Adaptor •Unplug the unit from a wall outlet when you are not using the unit for a long time. To disconnect the power cord, pull it out by the plug. Never pull the power cord itself. •Do not operate the unit with a damaged cord or if the unit has been dropped or damaged. •Do not bend the power cord forcibly, or place a heavy object on it. This will damage the cord and may cause fire or electrical shock.
Maintenance information and precautions Note on dry batteries To avoid possible damage from battery leakage or corrosion, observe the following: – Be sure to insert the batteries with the + – polarities matched to the + – marks. – Dry batteries are not rechargeable. – Do not use a combination of new and old batteries. – Do not use different types of batteries. – Current flows from batteries when you are not using them for a long time. – Do not use leaking batteries.
Specifications Video camera recorder System Video recording system 2 rotary heads Helical scanning system Audio recording system Rotary heads, PCM system Quantization: 12 bits (Fs 32 kHz, stereo 1, stereo 2), 16 bits (Fs 48 kHz, stereo) Video signal NTSC color, EIA standards Usable cassette Mini DV cassette with the mark printed Tape speed SP: Approx. 18.81 mm/s LP: Approx. 12.56 mm/s Recording/playback time (using cassette DVM60) SP: 1 hour LP: 1.
Specifications General Power requirements 7.2 V (battery pack) 8.4 V (AC Adaptor) Average power consumption (when using the battery pack) During camera recording using LCD 5.1 W Viewfinder 4.1 W Operating temperature 0°C to 40°C (32°F to 104°F) Storage temperature –20°C to + 60°C (–4°F to + 140°F) Dimensions (approx.) 73 × 93 × 169 mm (2 7/8 × 3 3/4 × 6 3/4 in.) (w/h/d) Mass (approx.
— Quick Reference — Identifying parts and controls Camcorder 5 1 6 3 7 8 9 4 q; 2 1 LCD/Touch panel screen (p. 23, 28, 29) 2 Speaker 3 OPEN button (p. 25) 4 RESET button If you press RESET, all the settings (DCR-TRV80: except the network settings) including the date and time return to the default. 210 5 Viewfinder lens adjustment lever (p. 30) 6 BATT release button (p. 15) 7 START/STOP button (p. 25) 8 Access lamp 9 “Memory Stick” slot (p. 102) q; DISPLAY/BATTERY INFO button (p.
Identifying parts and controls qg qa qh qj qk qs qd ql qf qa Hooks for shoulder strap qg Cassette compartment qs Battery pack (p. 15) qh Cassette lid (p. 8) qd FOCUS button (p. 61) qj qf BACK LIGHT button (p. 32) qk Lens cap (p. 25) OPEN/EJECT lever (p. 8) Quick Reference ql Tripod receptacle Make sure that the length of the tripod screw is less than 5.5 mm (7/32 inch). Otherwise, you cannot attach the tripod securely, and the screw may damage your camcorder.
Identifying parts and controls wh w; wa wj ws wd wk wf wl wg w; Flash (p. 111) wh Viewfinder (p. 30) wa Focus ring (p. 61) wj Display window (p. 16) ws Lens wk HOLOGRAM AF emitter (p. 113) wd Camera recording lamp (p. 25) wl Remote sensor wf Infrared rays emitter (p. 32, 80) wg Microphone Note on the Carl Zeiss lens Your camcorder is equipped with a Carl Zeiss lens which can reproduce fine images.
Identifying parts and controls e; eg ea eh ej ek es ed el ef e; PHOTO button (p. 44, 107, 114) eg EDITSEARCH button (p. 35) ea Power zoom lever (p. 31, 71, 133) eh Intelligent accessory shoe (p. 92) es NIGHTSHOT switch (p. 32) ej Shoe cover (p. 92) ed Stylus holder (DCR-TRV80 only) (p. 170) ek (flash) button (p.111) Quick Reference el Grip belt ef Stylus (DCR-TRV80 only) (p.
Identifying parts and controls r; rg ra rh rj rs rk rd rl t; rf r; ra DV Interface (p. 76, 87, 167) The DV Interface is i.LINK compatible. rg S VIDEO jack (p. 42) rh (USB) jack (p. 141) (Bluetooth) lamp (DCR-TRV80 only) (p. 169) (LANC) jack (blue) rs LOCK switch (p. 26) rj rd POWER switch (p. 25) rk MIC (PLUG IN POWER) jack (red) Connect an external microphone (optional). This jack also accepts a “plug-in-power” microphone. When the external microphone is connected, it takes precedence.
Identifying parts and controls Remote Commander The buttons that have the same name on the Remote Commander as on your camcorder function identically to the buttons on your camcorder. 8 1 9 2 3 0 qa qs 4 qd 5 6 7 1 PHOTO button (p. 44, 107, 114) qf 4 SEARCH MODE button (p. 73, 74) 9 ZERO SET MEMORY button (p. 72) 5 Video control buttons (p. 40) q; START/STOP button (p. 25) 6 REC button qa DATA CODE button (p. 38) 7 MARK button (p. 84) qs Power zoom button (p.
Identifying parts and controls Operation indicators LCD screen and Viewfinder 1 2 3 4 5 6 7 8 50min – STILL 16:9WIDE NEG. ART AUTO 60 AWB F1.8 9dB STBY + 0:48:00 12min ZERO SET MEMORY END SEARCH DV IN 16BIT 9 0 qa qs 1 Cassette Memory (p. 12, 194) 2 Remaining battery time (p. 27) 3 Zoom (p. 31)/Exposure (p. 59)/ Data file name (p. 128) 4 Digital effect (p. 54, 70)/MEMORY MIX (p. 116)/Fader (p. 50) 5 16:9WIDE (p. 48) 6 Picture effect (p. 53, 69) 7 Data code (p. 39) 8 Volume (p. 37)/Date (p.
Index A, B HOLOGRAM AF .................. 113 AC Adaptor ............................. 16 Adjusting the viewfinder ...... 30 Audio dubbing ........................ 91 AUDIO MIX .......................... 175 AUDIO MODE ...................... 179 Auto red-eye reduction ........ 111 AUTO SHTR .......................... 173 A/V connecting cable ................. 42, 76, 87, 167 BACK LIGHT .......................... 32 Battery Info .............................. 18 Battery pack .............................
Printed on 100% recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink.
