Operating Guide

Recording/Playback

Recording

e images are recorded on the media selected on the media setting (p. 11).

In the default setting, both movies and still images are recorded on the hard disk.

1 Turn the POWER switch until the respective lamp lights up.

Press the green button only when the POWER switch is in the OFF (CHG) position.

2 Start recording.

Movies

Press START/STOP  (or ).

To stop recording, press START/STOP

again.

Still Images

Press PHOTO  lightly to adjust the

focus  (a beep sounds), then press it

fully  (a shutter click sounds).

appears beside or . When

disappears, the image has been recorded.

Tips



You can check the recordable time and the

remaining capacity, etc., by touching

(HOME)  (MANAGE MEDIA) 

[MEDIA INFO].



You can capture still images by pressing

PHOTO  during movie recording.



e maximum continuous recordable time is



approximately 13 hours.



When a movie le exceeds 2 GB, the next movie

le is created automatically.

POWER switch

: To record movies

: To record still images

START/STOP 

START/STOP 

[STBY]  [REC]

PHOTO 

Flashing  Lights up

(HOME)

(p.

20)