Operating Instructions

Advanced Recording Operations

Using the fader function

When the OVERLAP, WIPE or DOT indicator appears

Your camcorder automatically stores the image recorded on a tape. At this stage, the

picture may not be recorded clearly, depending on the tape condition.

While using the bounce function, you cannot use the following functions:

–Exposure

–Focus

–Zoom

–Picture effect

Note on the bounce function

The BOUNCE indicator does not appear in the following mode or functions:

–D ZOOM is set to 20× or 120× in the menu settings

–16:9 wide

–Picture effect

–PROGRAM AE

While in MEMORY mode

You cannnot use the fader function.