Computer Applications Guide
Table Of Contents
- Read this first
- Read this first 2
- Connecting to a Windows computer
- Introduction to editing pictures on a computer 6
- Step 1: Installing the USB driver on a computer 8
- Step 2: Installing the image editor software (ImageMixer Ver.1.5 for Sony) 9
- Step 3: Installing the image exchange software (Image Transfer) 11
- Step 4: Connecting your camcorder to a computer 13
- Step 5: Checking the connection 17
- Managing pictures on a Windows computer
- Connecting to a Macintosh computer (“Memory Stick” only)
- Other functions
- Additional information
- Connecting to a Windows computer
- Introduction to editing pictures on a computer
- Step 1: Installing the USB driver on a computer
- Step 2: Installing the image editor software (ImageMixer Ver.1.5 for Sony)
- Step 3: Installing the image exchange software (Image Transfer)
- Step 4: Connecting your camcorder to a computer
- Step 5: Checking the connection
- Managing pictures on a Windows computer
- Connecting to a Macintosh computer (“Memory Stick” only)
- Other functions
- Additional information
Connecting to a Windows computer
8
DCR-PC330/IP1
3-084-946-11(1)
G:\BackUP(E)\PC(3084946111)\0729PC_GB\3084946111\3084946111_PC\01US02WIN1.fm
master:Right
Step 1: Installing the
USB driver on a
computer
You need to install the USB driver on your
computer to connect your camcorder via a
USB cable (supplied). The installation is
required only for the first time. From the
second time on, you only need to connect the
USB cable.
To transfer pictures with more precision, use
an i.LINK cable (optional) instead of the
USB cable (DV format models only).
In that case, operations in Step 1 are not
necessary.
For Windows 2000/Windows XP
Log on as Administrators.
b Note
• Do not connect the USB cable (supplied) before
installing the driver.
1 Start up the computer.
Close down all applications running on the
computer before installing the USB driver.
2 Place the supplied CD-ROM in the
disc drive of your computer.
The application software starts up.
If the screen does not appear
1 Double-click [My Computer].
2 Double-click [ImageMixer] (Disc
drive)*.
* Drive names (such as (E:)) may vary
depending on the computer.
3 Click [Handycam].
4 Click [USB Driver].
5 Click [Next].