Computer Applications Guide
Table Of Contents
- Read this first
- Read this first 2
- Connecting to a Windows computer
- Introduction to editing pictures on a computer 6
- Step 1: Installing the USB driver on a computer 8
- Step 2: Installing the image editor software (ImageMixer Ver.1.5 for Sony) 9
- Step 3: Installing the image exchange software (Image Transfer) 11
- Step 4: Connecting your camcorder to a computer 13
- Step 5: Checking the connection 17
- Managing pictures on a Windows computer
- Connecting to a Macintosh computer (“Memory Stick” only)
- Other functions
- Additional information
- Connecting to a Windows computer
- Introduction to editing pictures on a computer
- Step 1: Installing the USB driver on a computer
- Step 2: Installing the image editor software (ImageMixer Ver.1.5 for Sony)
- Step 3: Installing the image exchange software (Image Transfer)
- Step 4: Connecting your camcorder to a computer
- Step 5: Checking the connection
- Managing pictures on a Windows computer
- Connecting to a Macintosh computer (“Memory Stick” only)
- Other functions
- Additional information
Connecting to a Windows computer
12
DCR-PC330/IP1
3-084-946-11(1)
G:\BackUP(E)\PC(3084946111)\0729PC_GB\3084946111\3084946111_PC\01US02WIN1.fm
master:Right
3 Click [Image Transfer].
4 Select the language for the installation,
then click [OK].
5 Click [Next].
6 Follow the on-screen instructions.
Make sure [Image Transfer] is indicated on
the program folder, then click [Next].
Normally, a new program folder [Image
Transfer] will be created.
7 Make sure that [YES] is checked for
[Launch Image Transfer
automatically when the camera, etc., is
connected.], then click [Next].
8 Click [Finish] to complete the
installation of Image Transfer.
The installation screen is closed.
Short-cut icons for Image Transfer and the
Image Transfer folder appear on the
desktop.
9 Remove the CD-ROM from the disc
drive of your computer.