Camera Operations Guide

Troubleshooting
Troubleshooting
123
Warning messages
If messages appear on the screen, check the following. See the page in parentheses for details.
Subjects Indications Corrective Actions/
References
Battery Use the “InfoLITHIUM” battery pack. cSee page 131.
Battery level is low. cCharge the battery (p. 16).
Old battery. Use a new one. cSee page 131.
Z Re-attach the power source. –
Moisture
condensation
% Z Moisture condensation. Eject the cassette. c See page 134.
% Moisture condensation. Turn off for 1H. cSee page 134.
Cassette/Tape Q Insert a cassette. cSee page 23.
Z Reinsert the cassette. cCheck if the cassette is damaged, etc.
Q Z The tape is locked - check the tab. cSee page 127.
Q The tape has reached the end. –
Use a cassette with Cassette Memory. c See page 127.
“Memory Stick
Duo”
Insert a Memory Stick. cSee page 24.
Reinsert the Memory Stick. c Reinsert the “Memory Stick Duo” a
few times. If even then the indicator
flashes, the “Memory Stick Duo”
might be damaged. Try with another
“Memory Stick Duo.”
Do not eject the Memory Stick during writing. –
This is a read-only Memory Stick. c Insert a writable “Memory Stick
Duo.”
Incompatible type of Memory Stick. c The type of “Memory Stick Duo”
incompatible with your camcorder is
inserted (p. 128).
This Memory Stick is not formatted correctly. c Check the format, then format the
“Memory Stick Duo” as necessary
(p. 73).
Cannot record. The Memory Stick is full. c Delete unnecessary images (p. 107).
- The Memory Stick is locked - check the tab. c See page 128.
Cannot playback. Reinsert the Memory Stick. –
Cannot record. Reinsert the Memory Stick. –
No file. • No file is recorded or there is no
readable file on the “Memory Stick
Duo.”
NO FILE AVAILABLE. • There is no file in the selected folder.
,continued