User Guide
Table Of Contents
- English
- Quick Start Guide
- Getting started
- Recording ﾐ Basics
- Playback ﾐ Basics
- Advanced Recording Operations
- Advanced Playback Operations
- Editing
- Customizing Your Camcorder
- ﾒMemory Stickﾓ Operations
- Using a ﾒMemory Stickﾓ ﾐ introduction
- Recording still images on ﾒMemory Stickﾓs ﾐ Memory photo recording
- Superimposing a still picture in a ﾒMemory Stickﾓ on a moving picture ﾐ MEMORY MIX
- Recording an image from a mini DV tape as a still image
- Copying still images from a mini DV tape ﾐ Photo save
- Viewing a still picture ﾐ Memory photo playback
- Copying the image recorded on ﾒMemory Stickﾓs to mini DV tapes
- Playing back images continuously ﾐ SLIDE SHOW
- Preventing accidental erasure ﾐ Image protection
- Deleting images
- Writing a print mark ﾐ PRINT MARK
- Additional Information
- Quick Reference
- 浅住・！
49
Advanced Recording Operations/Уcовepшeнcтвовaнныe опepaции cъeмки
To cancel the fader function
After the fade in/out is carried out : Your
camcorder automatically returns to the normal
mode.
Before the fade in/out is carried out : Before
pressing START/STOP, press FADER until the
indicator disappears.
Note
You cannot use the following functions while
using the fader function. Also, you cannot use
the fader function while using the following
functions.
–Digital effect
–Low lux mode of PROGRAM AE (Overlap
function only)
–NightShot +Slow shutter
–Photo recording
When the OVERLAP indicator appears
Your camcorder automatically stores the image
recorded on a tape. As the image is being
stored, the OVERLAP indicator flashes fast,
and the playback picture is displayed.
At this stage, the picture may not be recorded
clearly, depending on the tape condition.
When START/STOP MODE is set to or
5SEC
You cannot use the fader function.
While in MEMORY mode
You cannot use the fader function.
Using the fader function
Для отмeны фyнкции фeйдepa
Поcлe выполнeния опepaции появлeния/
иcчeзновeния изобpaжeния : Bидeокaмepa
aвтомaтичecки вepнeтcя в обычный peжим.
Пepeд выполнeниeм опepaции появлeния/
иcчeзновeния изобpaжeния : До нaжaтия
кнопки START/STOP нaжмитe кнопкy
FADER, покa нe иcчeзнeт индикaтоp.
ПPИMEЧAHИE
Пpи иcпользовaнии фyнкции фeйдepa
нeвозможно иcпользовaть нижecлeдyющиe
фyнкции. Taкжe пpи иcпользовaнии
yкaзaнныx нижe фyнкций нeвозможно
иcпользовaть фyнкцию фeйдepa.
– Цифpовой эффeкт
– Peжим низкой оcвeщeнноcти PROGRAM
AE (только фyнкция нaложeния)
– Hочнaя cъeмкa +мeдлeнный зaтвоp
– Фотоcъeмкa
Пpи появлeнии индикaтоpa OVERLAP
Bидeокaмepa aвтомaтичecки cоxpaнит
изобpaжeниe, зaпиcывaeмоe нa лeнтy. Bо
вpeмя cоxpaнeния изобpaжeния индикaтоp
OVERLAP бyдeт чacто мигaть, и бyдeт
отобpaжaтьcя воcпpоизводимоe
изобpaжeниe.
Ha этом этaпe изобpaжeниe можeт быть
зaпиcaно нe cовceм чeтко в зaвиcимоcти от
cоcтояния лeнты.
Ecли комaндa START/STOP MODE
ycтaновлeнa в положeниe или 5SEC
Фyнкцию фeйдepa нeвозможно
иcпользовaть.
Пpи иcпользовaнии peжимa MEMORY
Фyнкцию фeйдepa нeвозможно
иcпользовaть.
Иcпользовaниe фyнкции
фeйдepa