3-074-603-12 (1) Network Function Operating Instructions Registration code (for a detailed explanation of this cord, see page 28.
On trademarks •ImageStation is the registered trademark of Sony Corporation. •“Memory Stick” and are registered trademarks of Sony Corporation. •The BLUETOOTH trademarks are owned by their proprietor and used by Sony Corporation under license. •NetFront by Access Co., Ltd. is adopted for the Internet function of this product. NetFront is a registered trademark of Access Co., Ltd in Japan. Copyright © 1996 – 2002 ACCESS CO., LTD.
Table of contents Introduction Preparation Using the NETWORK functions .............. 18 Overview of the Bluetooth wireless technology ............................................ 19 Registering a Bluetooth device ......... 20 Using your Modem Adaptor with Bluetooth Function ...................... 20 When the registration has failed ...... 24 Displaying information on your camcorder ..................................... 24 Radio wave indication .......................
– Introduction – The network function on the camcorder Congratulations on your purchase of this Sony Handycam. This Handycam can access to the Internet through your provider using a dial-up networking connection with a Bluetooth device. You can view web pages, receive email, and send email with images recorded on your camcorder attached.
The network function on the camcorder Making your album on the Web Introduction You can upload images to your album, and view or edit your album. Easy network preferences (So-net) Using the “So-net” option, you can easily set the required Internet and email preferences. For details on “So-net,” see “Using the recommended provider (So-net)” (p. 32), or the supplied flyer “Getting Online with your Sony Network Handycam® camcorder.” Set the camcorder’s clock setting before using the Network functions.
Basic operations in the NETWORK mode This section describes basic control ways to operate your camcorder, those which are used for network operations. How to use the Network Menu To access the Network Menu, refer to “Accessing the network” in the operating instructions supplied with your camcorder. [a] [b] [c] [d] [e] [a]: Send and receive email. For details, see “Using email” (p. 58). [b]: View a web page through the Internet. For details, see “Viewing web pages” (p. 82).
Basic operations in the NETWORK mode How to hold your camcorder when operating in the NETWORK mode 1 Turn the LCD panel over and move it back to your camcorder with the LCD screen facing over. 2 Hold your camcorder as illustrated below. Introduction When operating in the NETWORK mode, you can turn the LCD panel over and move it back to your camcorder with the LCD screen facing over to use the stylus (for touch panel operation, supplied).
Basic operations in the NETWORK mode How to use the stylus The buttons required for operating your camcorder are displayed on the LCD screen. Operate by pressing the buttons on the screen directly but lightly with the stylus provided. In this manual, pressing the buttons in this way using the stylus is referred to as “tapping”. Tap the desired button on the screen with the stylus. The selected button turns orange. , Notes •Do not tap them with sharp-pointed objects other than the stylus supplied.
Basic operations in the NETWORK mode How to input characters 1 (1) Open the Network Menu. For details on how to open the Network Menu, refer to “Accessing the network” in the operating instructions supplied with your camcorder. Introduction You have to frequently enter characters, such as email addresses, or web pages addresses (URL), to use the network function. This section describes how to input characters. (2) Tap [ Mail]. The Send screen appears. , (3) Tap [To]. , (4) Tap [ New].
Basic operations in the NETWORK mode 2 Selecting the character type Tap [abcy123], then tap the desired character type. abc: When inputting alphabetical characters. 123: When inputting numerical characters. When you selected abc When you selected 123 3 Inputting characters (1) Tap the character you want to input. (2) After you input the characters, tap [Enter]. The screen which is displayed before you display the character input screen appears.
Basic operations in the NETWORK mode Character input display 3 2 4 5 6 9 7 8 1 [a/A] button [a/A] button is displayed when you input alphabetical characters. You can switch between upper case and lower case. 2 [abcy123] button A list box appears when you tap the [abcy123] button. Tap the desired type of letter from the list box. 3 Input byte number/maximum byte number 4 Preferences You can change the keyboard type for alphabet input.
Basic operations in the NETWORK mode The available characters list When selecting [abc] Alphabetical characters The alphabet keyboard has 2 types (PC Style and Alphabetical order). The default setting is PC arrangement. You can change the keyboard setting in . Refer to page 17 for more information.
Basic operations in the NETWORK mode When selecting [123] Symbol characters (Numerical order) Introduction 1 2 3 + ( ) $ 4 5 6 – 7 8 9 / * 0 # = < C \ % [ ] { } & ˆ | ˜ ` ” ’ > , . : ; _ To switch between upper and lower case alphabet letters Tap [a/A] to change the alphabetical keyboard, then enter characters. To delete a character Move the cursor with the stylus to the right of the character at which you want to delete, tap [Back space].
Basic operations in the NETWORK mode E.g., Enter “Hello” into the Subject item on the Send screen 1 (1) Open the Network Menu. For details on how to open the Network Menu, refer to “Accessing the network” in the operating instructions supplied with your camcorder. (2) Tap [ Mail]. The Send screen appears. , 2 Entering the subject of a message (1) Tap [Subject]. (2) Tap [ New]. The character input screen appears.
Basic operations in the NETWORK mode 3 (1) Tap [abcy123], then tap [abc]. Introduction (2) Tap [a/A] to be able to enter upper-case letters. , (3) Tap [H]. “H” is entered. , (4) Tap [a/A] to be able to enter lower-case letters.
Basic operations in the NETWORK mode (5) Tap [e]. “e” is entered. , (6) Tap [l], [l] and [o]. “llo” is entered. , (7) Tap [Enter]. “Hello” is entered and the Send screen appears again.
Basic operations in the NETWORK mode Character input setting Keyboard 1 Tap in the character input screen. Introduction You can change the display of the alphabet, PC arrangement keyboard or ABC arrangement keyboard into a setup you want when you input characters. , 2 Tap the desired setting. You can set as the following two displays when [abcy123] is set as [abc]. (PC Style is the default setting.
– Preparation – Using the NETWORK functions There are three Network functions, namely album on the Web, email, and browser. To use the album on the Web and So-net, you need to complete customer registration. “So-net” is charged service. For more information, see the supplied flyer “Getting Online with your Sony Network Handycam® camcorder”.
Overview of the Bluetooth wireless technology What is the Bluetooth wireless technology? Authentication The authentication routine can block unspecified users’ access to this network. When attempting communication with an unregistered Bluetooth device, the devices must first be registered with each other by entering a common passkey to each device. When connecting with a previously registered Bluetooth device, communication starts without entering the passkey.
Overview of the Bluetooth wireless technology Registering a Bluetooth device This section describes making a registration of a Bluetooth device. Here we describe the procedure for registering the Sony Modem Adaptor with Bluetooth Function. Once the registration is completed, your camcorder can connect to your Bluetooth device without reregistering the device. You can register up to three Bluetooth devices. Also, refer to the operating instructions supplied with your Bluetooth device.
Overview of the Bluetooth wireless technology 2 Specifying your Modem Adaptor with Bluetooth Function as the connection device (1) Open the Network Menu. For details on how to open the Network Menu, refer to “Accessing the network” in the operating instructions supplied with your camcorder. Preparation (2) Tap [ Setup]. The Setup screen appears. , (3) Tap [Bluetooth Setup]. The Bluetooth Setup screen appears.
Overview of the Bluetooth wireless technology (4) Tap [Select]. The Bluetooth devices list appears. When making a registration for the first time, only [ Return] and [ New] are indicated. The list shows up to three Bluetooth devices. You can select one of the latest used three Bluetooth devices from the list. , Tip The last-used Bluetooth device is listed next to [ Return] and [ New]. (5) Tap [ New]. Your camcorder starts searching for your Bluetooth devices.
Overview of the Bluetooth wireless technology (7) Enter the passkey. For details on how to input characters, see “How to input characters” (p. 9). For example, when using the BTA-NW1/BTA-NW1A Modem Adaptor with Bluetooth Function, the passkey is its serial number which is indicated on the label on the rear panel. MODEL NO.
Overview of the Bluetooth wireless technology (10) Tap [Exit]. The Network Menu appears again. , When the registration has failed After pressing [OK], and carry out the procedure described in step 4 on page 22 again. Displaying information on your camcorder You can display your camcorder information. (1) Open the Network Menu. For details on how to open the Network Menu, refer to “Accessing the network” in the operating instructions supplied with your camcorder.
Overview of the Bluetooth wireless technology (2) Tap [ Setup]. The Setup screen appears. Preparation , (3) Tap [Bluetooth Setup]. The Bluetooth Setup screen appears. , (4) Tap [Info.]. The Bluetooth Setup: Self information screen appears. The model name This is the unique address assigned to each camcorder at the factory. This address is used when exchanging information between devices. This address cannot be modified. (The number indicated on the illustration is an example number.
Overview of the Bluetooth wireless technology Radio wave indication indicates the radio wave status of the connected Bluetooth device. (Use this indication as a guide.) Selecting other Bluetooth devices from the list Tap the Bluetooth device you want to specify in step 4 on page 22. The device information is indicated. Tap [Exit]. Deleting a registered Bluetooth device from the list You can register up to three Bluetooth devices on your camcorder.
Overview of the Bluetooth wireless technology (3) Tap [Bluetooth Setup]. The Bluetooth Setup screen appears. Preparation , (4) Tap [Select]. The Bluetooth devices list appears. , (5) Tap the device you want to delete. The device name and address of the selected device are indicated. , (6) Tap [Delete]. The selected device is deleted from the list.
Customer registration DI customer registration The camcorder offers network functions in addition to its basic functions. In order to take full advantage of these network functions, you should complete the DI (Digital Imaging) customer registration for the services provided. For details on services available, see the supplied flyer “Getting Online now with your Sony Network Handycam® camcorder.
Customer registration (1) Open the Network Menu. For details on how to open the Network Menu, refer to “Accessing the network” in the operating instructions supplied with your camcorder. Preparation (2) Tap [ Setup]. The Setup screen menu appears. , (3) Tap [Online Registration]. The screen for verifying the connection appears. Tap [Connect]. Your camcorder starts connecting to the site. Once the connection is completed, the online registration screen appears.
Customer registration (5) After you complete your customer registration, continue on to register your album (page 31). Note When registering online with your camcorder, the connection may be disconnected. However, data entry can be done offline. When your camcorder needs to connect with the site, the screen for verifying the connection appears. Tap [Connect], the connection will be established again.
Registering your album on the Web To upload an image recorded with your camcorder to your album on the Web, you have to complete your album registration. Before registering, be sure to read “ImageStation’s Privacy Policy” (p. 109) and “Member Agreement” (p. 114). If you do not agree to the terms, you cannot complete the registration.
Internet service provider To access the Internet, you have to sign-up with an Internet service provider (ISP). The provider acts as an intermediary between your camcorder and the Internet. After you sign-up with a provider; you can view various web pages through the Internet, you can send and receive email using your email address. The email address is a destination address in email transmission. Also, various other services may be available depending on your provider.
Registering with “So-net” You can complete your online registration with “So-net” using your camcorder. You can also sign up with “So-net” in your DI customer registration step. The “So-net” registration is done by either of the following ways: 1 Register for “So-net” in your DI customer registration step 2 Register for “So-net” after the DI customer registration is completed (1) Fill in “So-net” registration form following on-screen directions. (2) After completing registration, tap END in the menu bar.
Setting network preferences You have to access the Internet to make your album on the Web, view web pages, or send or receive your email. This section describes how to set network preferences to access the Internet. Entering your DI customer ID and password Enter the DI (Digital Imaging) customer ID and password you obtained as a result of your DI customer registration. This setup is required to use the “So-net” option and make your album on the Web. (1) Open the Network Menu.
Setting network preferences (4) Tap [ID]. The character input screen appears. Preparation , (5) Enter your DI customer ID. For details on how to input characters, see “How to input characters” (p. 9). (6) Tap [Enter]. The Network Setup screen appears again. , (7) Tap [Password]. The character input screen appears. , (8) Enter your password. For details on how to input characters, see “How to input characters” (p. 9).
Setting network preferences (9) Tap [Enter]. The Network Setup screen appears again. , Tip While inputting password characters, they are visible as they are. However, after it has been entered, each character is indicated as “∗”. If you enter your password again, delete all “∗” before entering the password. (10) Tap [Exit]. The setup of the DI customer ID and password are complete, and the Setup screen appears again.
Setting network preferences 1 “So-net” settings (1) Tap [Network Setup]. The Network Setup screen appears. The default setting is “So-net”. Preparation , (2) Tap [Setting]. The Provider Setting: So-net screen appears. , Go to “2 Entering the telephone numbers of your access points” on page 38.
Setting network preferences 2 Entering the telephone numbers of your access points This setup is only for those using “So-net”. For more information on the telephone numbers of access points, see the supplied flyer “Getting Online with your Sony Network Handycam® camcorder.” Tip on access points “So-net” installs access points in various areas. We recommend that you select the most convenient access point which allows you to obtain the lowest telephone charges. (1) Tap [TEL1].
Setting network preferences 3 Setting your provider preferences manually If you have already made the So-net settings, you do not need to make the following settings. Preparation (1) Tap [Network Setup]. The Network Setup screen appears. , (2) Tap [Custom]. a is checked and changes to . , (3) Tap [Setting]. The Provider Setup: Custom screen appears. , (4) Tap [PPP].
Setting network preferences (5) Set up the following items: ID: Enter the login name you use for accessing your provider using a dial-up connection. This “ID” is also referred to as a “user ID”, “login name”, “PPP login name”, “network ID”, “account name”, “logon name”, “user name”, etc. Password: Enter the password you use for accessing your provider using a dial-up connection. (Dial-up connection t Glossary (p.
Setting network preferences POP Server: Enter the POP (Post Office Protocol) server address of your provider. The POP server is for receiving email. This “POP Server” is also referred to as a “mail server”, “POP3 server”, etc. APOP: Select whether you want to use APOP. (APOP t “Glossary” (p. 106)) Preparation SMTP Server: Enter the SMTP (Simple Mail Transfer Protocol) server address of your provider. The SMTP server is for sending email.
Setting network preferences 4 Setting other preferences You can access the Internet with your camcorder using the default settings. It is not necessary to make the following settings. This example is provided to show you how to make changes, if necessary, in the future. (1) Display the Setup screen. (2) Tap [Network Options]. The Network Options screen appears. , (3) Set up the following items: Verify Password: Select whether password entry is required when you access your provider.
Setting network preferences Mail Send&Receive: Select whether to check the email inbox after sending email. Restrict: Select whether to skip an email message if its file size is more than 50 KB, 200 KB, or 500 KB. Save Mail to Server: Select whether to keep copies of the messages on the server. Preparation Note If you try to receive email without checking this item, email messages may not be downloaded and may be lost from your server, depending on the type of email you receive.
Setting network preferences Note on “Save Mail to Server” When “Save Mail to Server” is not checked, copies of email messages received will not be stored on your server. However, the following error messages described below depend on the type of email messages. See the table below. Messages1) Cause and/or Corrective Actions Memory Stick Memory Full You tried to download email when the “Memory Stick” is already full.
— Network Operation— Making your album on the Web You can upload still or moving images to your “album on the Web” through the Internet and post the images on your album. The album on the Web is provided with “ImageStation.” You can make an image album on the Web as a simplified web page and send an invitation card to invite your friends to your album. For more information on “ImageStation”, access the “ImageStation” web site (“http://www.imagestation.com/us/PC/”).
Making your album on the Web (2) Tap [ Album]. The Album screen appears. , (3) Tap [ Upload]. The Album: Upload screen appears. , (4) Tap [Album No.]. The album list page appears. , (5) Tap the desired album. Selecting the album is complete. , The number of prepared albums There are 10 albums (Album 01 to 10).
Making your album on the Web 2 Selecting images to upload Next, select the images to upload. (1) Tap [Image Sel.]. The image index list appears. Network Operation , (2) Tap the desired images. Tap the image you want to upload. The selected image is indicated by the checkmark ( ). To page up or down the image index list Tap [<] or [,]. The next or previous page that contains six images is displayed. (3) Repeat step 2 to select other images.
Making your album on the Web 3 Sending an invitation card (email) Select the addressee to send the invitation card (email) to. (1) Tap [Invitation]. The Album: Invitation screen appears. , (2) Tap [To]. The address list appears. The list shows the destination addresses that are registered in the address book. For details on the address book, see “Using the address book” (p. 69). , When you have selected the address listed in the address book, go to step 6.
Making your album on the Web (5) Tap [Enter]. The Album: Invitation screen appears again. The new email address is listed and its check box is indicated by the checkmark ( ). (6) If you want to send the invitation card to other addressees, tap other email addresses. The check box of the selected email address is indicated by the checkmark ( ). (7) Tap [ Return]. The Album: Invitation screen appears again.
Making your album on the Web 4 Entering the text of a message Enter the text of the message. You can select the text from the message list, or edit it to suit your purposes. The list shows up to six messages. Selecting a lately used message Tap [Message]. The message list appears. , The list shows messages that were written previously. Tap the message to select it from the list. If you want to edit text, tap [Edit]. The character input screen appears. Go to step 3.
Making your album on the Web (3) Tap [Enter]. The Album: Invitation screen appears again. , Network Operation (4) Tap [OK]. The Album: Upload screen appears again. “Yes” is indicated next to [Invitation]. , 5 Uploading images (1) Tap [Send]. The screen for verifying the connection appears. Set your Bluetooth device to connection standby with your camcorder beforehand. For details, refer to the operating instructions supplied with your Bluetooth device. , (2) Check the telephone number.
Making your album on the Web (3) Tap [Connect]. Your camcorder starts dialing the selected telephone number. After the uploading is completed, the message “Upload Complete” appears. , , (4) Tap [OK]. The Album: Upload screen appears again. To cancel uploading During uploading, tap [Cancel]. To send only an invitation card (email) You can send an invitation card without uploading images. Carry out the following procedures: “1 Selecting an album” (p. 45) “3 Sending an invitation card” (email) (p.
Making your album on the Web (3) Tap [ View/Edit]. The screen for verifying the connection appears. Set your Bluetooth device to connection standby with your camcorder beforehand. For details, refer to the operating instructions supplied with your Bluetooth device. Network Operation , (4) Check the telephone number. When dialing other telephone numbers Tap [TEL No.]. The registered telephone number list appears. Tap the desired telephone number. The selected telephone number is specified.
Making your album on the Web 2 Downloading images from the album Before operation •Insert a “Memory Stick” into your camcorder, for storing images. •Release the lock of the “Memory Stick.” (1) Select the images you want to download. You can select the images in the following two ways: Selecting images from the index page: You can select several images and download them at one time. For details, see “To select images from the index page” (p. 55).
Making your album on the Web To view a downloaded image Exit the NETWORK mode, then view the image following the same procedure as that for viewing an image recorded on a “Memory Stick.” In such cases, the file name of the still image displayed on your camcorder is indicated in the following order: 700-0001, 700-0002, 700-0003 ... To select images from the index page (1) Tap the check box of the desired image. The check box is indicated by the checkmark ( ).
Making your album on the Web To cancel all the selected images Tap . To return to the album list page Tap . To select an image displayed on the single-image page You can select an image displayed on the full-screen and download it. (1) When the index page is displayed, tap the image to be enlarged. The image is indicated on the single-image page. (2) When you want to view other image, tap . (3) Tap The screen for verification appears. , To return to the index page Tap .
Making your album on the Web Deleting images from your album You can delete images from your album. To delete images displayed on the index page You can select several images and delete them at one time. Tap in step 3 in “To select images from the index page” (p. 55). The screen for verification appears. Tap [OK]. The index page appears again. Tap in step 3 in “To select an image displayed on the single-image page” (p. 56). The screen for verification appears. Tap [OK]. The next image is displayed.
Using email This section describes the basic usage of email. Email is sent and received via the Internet. Email is very convenient; you can send email anytime, and you can also send images stored in a “Memory Stick” by attaching them to email. Sending email By entering the email address of the destination, you can send an email message in a moment. 1 Specifying the destination address Be careful to enter the address correctly. Tip You can select the email address from the address book.
Using email (3) Tap [To]. The address list appears. The list shows the latest used six addresses that are registered in the address book. For details on the address book, see “Using the address book” (p. 69). When you have selected an address listed in the address book, go to step 7. Network Operation , Tips • The last-used address is listed next to [ • Addresses are listed in historical order. Return] and [ New]. (4) Tap [ New]. The character input screen appears.
Using email (7) If you want to send the email message to other addressees, tap other email addresses. The check box of the tapped email address is indicated by the checkmark ( ). (8) Tap [ Return]. The Send screen appears again. Note If you try to send an email message with 50 addresses registered in the address book, the least recently used address will be deleted. The message “Address Book Full Overwrite the Data with Current Address?” appears for verification. When you overwrite it, tap [OK].
Using email 2 Entering the subject of a message (1) Tap [Subject]. The subject list appears. The list shows the latest used six subjects. When you want to use a subject shown on the list, tap the subject. After selecting the subject, go to “3 Entering the text of a message” (p. 62). Tip The last-used subject is listed next to [ You cannot edit or delete the subject. Return] and [ Network Operation , New]. (2) Tap [ New]. The character input screen appears. , (3) Enter the subject.
Using email 3 Entering the text of a message Enter the text of the message. You can select the text from the message list, or edit it to suit your purposes. The list shows up to six messages. (1) Tap [Message]. The message list appears. , When you select the message you wrote previously, tap the message from the list. When you do not edit message, tap [OK]. After you select the message, go to “4 Sending email” (p. 63). If you edit the selected text, tap [Edit]. The character input screen appears.
Using email 4 Sending email Tip You can send an email message with your signature. For details, see “Attaching your signature to a message” (p. 67). (1) Select the image that you want to attach. When attaching images, see “Attaching images to email” (p. 66). (3) Tap [Send]. The screen for verifying the connection appears. Set your Bluetooth device to connection standby with your camcorder beforehand. For details, refer to the operating instructions supplied with your Bluetooth device.
Using email (6) Tap [OK]. The Send screen appears again. To cancel sending email During sending, tap [Cancel]. Tip You can automatically check the email inbox after sending email. For details, see “4 Setting other preferences” (p. 42). Checking or editing a message (1) Display the Send screen. (2) Tap [Message]. The message list appears. , (3) Tap the message you want to check or edit. The following screen appears.
Using email (4) Check or edit the message. When the message is long, tap the message area, then tap the scroll button V to scroll the message. When you only check the message: After checking the message, tap [OK]. The Send screen appears again. When you edit the message: Go to step 5. Network Operation (5) Tap [Edit]. The character input screen appears. , (6) Edit the message. For details on how to input characters, see “How to input characters” (p. 9). (7) Tap [Enter]. The Send screen appears again.
Using email Attaching images to email You can send images by attaching them to email messages. Before operation •Insert the “Memory Stick” that the desired images are stored in into your camcorder. •Release the lock of the “Memory Stick”. (1) Follow these procedures: “1 Specifying the destination address” (p. 58), “2 Entering the subject of a message” (p. 61), and “3 Entering the text of a message” (p. 62). The Send screen appears. (2) Tap [Attach]. The images recorded in the “Memory Stick” are displayed.
Using email (4) Repeat step 3 to select other images that you want to attach. Note The total number of images you can attach is 99, and the maximum file size is up to total 3 MB. , Network Operation (5) Tap [ OK]. The Send screen appears again. The total number of selected images and total file size are indicated. To cancel selecting image Tap the image again. The checkmark will disappear from the image. To cancel selecting all the images Tap [ CLR].
Using email (2) Tap [ Setup]. The Setup screen appears. , (3) Tap [Network Options]. The Network Options screen appears. , (4) Tap [Signature]. The character input screen appears. , (5) Enter your signature. For details on how to input characters, see “How to input characters” (p. 9). Note The maximum number of characters you can enter is 256.
Using email (6) Tap [Enter]. The setup of your signature is completed, and the Network Options screen appears again. “Yes” is indicated next to [Signature]. (7) Tap [Exit]. The Setup screen appears again. Network Operation , (8) Tap [Exit]. The Network Menu appears again. Using the address book Once you register frequently used email addresses in the address book, you can send email without entering the email address manually.
Using email (2) Tap [ Mail]. If the Address screen is not displayed, tap the Address. The address screen appears. , (3) Tap [New]. The Address Book: New screen appears. , (4) Tap [Name]. The character input screen appears. , (5) Enter the destination name. For details on how to input characters, see “How to input characters” (p. 9). Note The maximum number of characters you can enter in the [Name] box is 24.
Using email (6) Tap [Enter]. The Address Book: New screen appears again. , Network Operation (7) Tap [Address]. The character input screen appears. , (8) Enter the email address. For details on how to input characters, see “How to input characters” (p. 9). (9) Tap [Enter]. The Address Book: New screen appears again. , (10) Tap [Return]. The Address screen appears again.
Using email (11) Tap [Exit]. The Network Menu appears again. Tips •The addresses are listed in alphabetical order. •When you reply to the address of a previously received email message, the address will be automatically registered on the address book. To edit the address, see “Editing or deleting the address book” below. Editing or deleting the address book You can edit or delete the names or email addresses in the address book.
Using email (4) Tap [Name] or [Address]. When editing the registered name, tap [Name], and when editing the registered address, tap [Address]. The character input screen appears. When you want to delete an address, tap [Delete]. When verification appears, tap [OK]. When you stop deleting, tap [Cancel]. Network Operation , (5) Edit the name or address. For details on how to input characters, see “How to input characters” (p. 9). (6) Tap [Enter]. The Address Book: Edit screen appears again.
Using email Selecting the destination address from the address book You can select the destination address from the address book. (1) Follow steps 1 and 2 in “Registering destination addresses in the address book” (p. 69). The Address screen appears. (2) Select the address you want to send a email by tapping or . (3) Tap [tTo]. The Send screen appears. The selected address is set as the destination address. , (4) Carry out the procedures described in “2 Entering the subject of a message” (p. 61).
Using email Receiving email Once you receive email, you can reply to it or forward it. Before operation •Insert a “Memory Stick” into your camcorder, for storing images. •Release the lock of the “Memory Stick.” Tip You can keep copies of your messages on your server even if you download the message using your camcorder. For details, see “Setting other preferences” (p. 42). Network Operation Checking your email inbox (1) Open the Network Menu.
Using email (3) Tap [Receive]. The screen for verifying the connection appears. Set your Bluetooth device to connection standby with your camcorder beforehand. For details, refer to the operating instructions supplied with your Bluetooth device. , (4) Check the telephone number. When dialing other telephone numbers Tap [TEL No.]. The registered telephone number list appears. Tap the desired telephone number. The selected telephone number is specified. (5) Tap [Connect].
Using email To cancel receiving email While downloading, tap [Cancel]. Email you don’t receive remains on your server. When the message is long Tap the scroll button V to scroll the message. When a file is attached to an email message To view an attached image Exit the NETWORK mode, then view the image following the same procedure as that for viewing an image recorded in a “Memory Stick.
Using email Sending your answer – Reply You can quickly reply to an email message without entering the address. (1) Display the Receive screen. (2) Tap the area where a message is displayed or tap [Message]. The selected message is displayed. , (3) Tap [Reply]. The Send screen appears. , Tip “Re:” is added to the beginning of the subject line. (4) Carry out the procedure described in “3 Entering the text of a message” (p. 62) to enter the text of the message.
Using email Forwarding the message to others – Forward You can forward a downloaded message to others. (1) Display the Receive screen. or . Network Operation (2) Display email you want to forward the message by tapping (3) Tap the area where a message is displayed or tap [Message]. The selected message is displayed. , (4) Tap [Forward]. The Send screen appears. , Tips • An attached file is not automatically forwarded. When you want to send the attached file, see “Attaching images to email” (p. 66).
Using email (6) Carry out the procedure described in “3 Entering the text of a message” (p. 62) to modify the message. Tip The maximum number of characters you can enter in a message is 512. The characters over that number will be deleted. (7) Carry out the procedure described in “4 Sending email” (p. 63) from step 3. Deleting unnecessary email You can store up to 50 received email messages in a “Memory Stick.
Using email (3) Display email you want to delete the message by tapping The selected message is displayed. or . , Network Operation (4) Tap [Delete]. The message “Delete This Mail?” used for verification appears. , (5) Tap [OK]. The selected email message is deleted. To cancel deleting email Tap [Cancel] in step 5.
Viewing web pages A site that posts information on the Internet is called “web page” or “web site”. You can easily retrieve information by accessing a web site on the Internet. Viewing web pages 1 Entering the URL needed to access the web page Enter the address of the web page, and then access the Internet. Be careful to enter the address correctly. Tip on URL A web site has a unique address on the Internet. The address is called a URL. This URL is required to access a web site. (1) Open the Network Menu.
Viewing web pages (4) Enter the URL. For details on how to input characters, see “How to input characters” (p. 9). (5) Tap [Enter]. The screen used for verifying the connection appears. Set your Bluetooth device to connection standby with your camcorder beforehand. For details, refer to the operating instructions supplied with your Bluetooth device. Network Operation , (6) Check the telephone number. When dialing other telephone numbers Tap [TEL No.]. The registered telephone number list appears.
Viewing web pages How to use the menu bar on the browser When you access the Internet and view a web page, you can carry out various operations using the menu bar. While the browser screen is displayed, tap menu on the upper-right LCD screen to display the menu bar. To show the menu bar (1) Tap menu on the upper-right LCD screen. The following menu bar appears. To hide the menu bar Tap menu or in the menu bar again. The menu bar disappears.
Viewing web pages When you fail to load a web page [Loading Error] message appears. Tap [OK], then tap menu on the upper-right LCD screen, and tap END in the menu bar. Network menu appears again. Note The buttons may not function, depending on the accessed web page. Note on connection status indication Off Line: being offline Network Operation The connection status is indicated on the top of the screen. This item also shows a connected time and the address of the web page.
Viewing web pages 2 Bookmarking the web page – Bookmark You can bookmark web pages you frequently access. You can bookmark up to 30. (1) Display the web page you want to bookmark. (2) When the menu bar is not displayed, tap The menu bar appears. menu on the upper-right LCD screen. (3) Tap (Bookmark). The bookmark list appears. , (4) Tap [ Add]. The bookmark is added, and the display returns to the web page. Note •The phone line may not be disconnected automatically.
Viewing web pages To edit a bookmark You can edit the title of a bookmark. (1) Tap (Bookmark). The bookmark list appears. (2) Tap the bookmark you want to edit. The title and URL are indicated. Network Operation , , (3) Tap [Edit]. The character input screen appears. , (4) Edit the name. For details on how to input characters, see “How to input characters” (p. 9). (5) Tap [Enter]. The title of the bookmark is modified. , (6) Tap [ Return]. The Browser screen appears again.
Viewing web pages To delete bookmarks You can delete bookmarks. We recommend that you delete unnecessary bookmarks since you can only store up to 30 bookmarks. (1) Tap (Bookmark). The bookmark list appears. , (2) Tap the bookmark you want to delete. , (3) Tap [Delete]. The message “Delete This Bookmark?” used for verification appears. , (4) Tap [OK]. The selected bookmark is deleted. , To cancel deleting the bookmark 88 Tap [Cancel] in step 4.
Viewing web pages 3 Jumping to the web page specified by the bookmark (1) When the menu bar is not displayed, tap The menu bar appears. menu on the upper-right LCD screen. Network Operation (2) Tap (Bookmark). The bookmark list appears. , (3) Tap the bookmark.
Viewing web pages (4) Tap [Go]. The screen used for verifying the connection appears. Set your Bluetooth device to connection standby with your camcorder beforehand. For details, refer to the operating instructions supplied with your Bluetooth device. , (5) Check the telephone number. When dialing other telephone numbers Tap [TEL No.]. The registered telephone number list appears. Tap the desired telephone number. The selected telephone number is specified. (6) Tap [Connect].
Viewing web pages (3) Tap (Page Memo). The page memo list appears. , Network Operation (4) Tap [ Add]. The message “Saving Page Memo Do Not Remove Memory Stick” appears. After the message disappears, storing is complete. , (5) The browser screen appears again. To cancel storing the web page During storing, tap [Cancel]. Note You cannot store the web page while loading it. Editing the title of a page memo You can edit the title of a page memo stored in a “Memory Stick.
Viewing web pages (2) Tap (Page Memo). The page memo list appears. , (3) Tap the page memo you want to edit. The title and URL of the selected page memo are indicated. , (4) Tap [Edit]. The character input screen appears. , (5) Edit the name. For details on how to input characters, see “How to input characters” (p. 9). (6) Tap [Enter]. The title of the page memo is edited.
Viewing web pages (7) Tap [ Return]. The browser screen appears again. To delete the page memo You can delete page memos. We recommend that you delete unnecessary page memos since you can only store up to 30 page memos. (1) When the menu bar is not displayed, tap The menu bar appears. menu on the upper-right LCD screen. Network Operation Before operation •Insert a “Memory Stick” into your camcorder, for storing page memos. •Release the lock of the “Memory Stick.” (2) Tap (Page Memo).
Viewing web pages (4) Tap [Delete]. The message “Delete This Page Memo Item?” used for verification appears. , (5) Tap [OK]. The selected page memo is deleted and the page memo list appears again. (6) Tap [ Return]. The browser screen appears again. To cancel deleting the page memo Tap [Cancel] in step 4. Displaying a web page stored in page memo You can display a page memo stored in a “Memory Stick.
Viewing web pages (3) Tap the page memo you want to display. , To select other page memo Network Operation (4) Tap [Open]. The web page stored in page memo is displayed. Tap [Return] in step 3. The page memo list appears. Tap other page memo. Shutting down the browser To finish viewing the web page, and disconnect the phone line (1) Tap menu on the upper-right LCD screen to display the menu bar. (2) Tap END (End). The browser is closed, then the phone line is disconnected.
– Additional Information – File storage destinations and file names Files are grouped in the following folders. You can only view these folders on a computer. The meanings of the file names are as follows. sssss stands for any number within the range from 00001 to 99999. ssss stands for any number within the range from 0001 to 9999. aaa stands for a portion of an attached file name.
Troubleshooting Trouble accessing the Internet The message “...Incomplete” or “Authentication Error...” is indicated and your camcorder cannot access the Internet. c When setting network preferences using the “So-net” option Check your setup according to the procedure described in “Setting network preferences” (p. 34).
Troubleshooting Trouble with email The message “DNS Error The Requested URL Could Not Found” is indicated and your camcorder cannot send or receive email. c When setting network preferences using the custom setup The DNS setup may be wrong. Check the PPP setup. Your camcorder cannot send email. c The clock setting of your camcorder is not set. Set up the clock setting.
Troubleshooting Attached files are not saved in the “Memory Stick.” c Compatible file types are .jpg, .mpg, .jpeg and .mpeg only. Check the file type. c The message “Memory Stick Directory Error” may be indicated when a “Memory Stick” whose directory structure does not correspond to the DCF standard is inserted. c All of your downloaded email messages are stored in the “Memory Stick.” Insert a new “Memory Stick” that has sufficient memory and download your email again.
Troubleshooting Troubles about the album on the Web The message “DI Customer ID profile Incomplete” is indicated and your camcorder cannot access the album on the Web. c The DI customer ID is required to use the album on the Web. You cannot view or edit your album, send an invitation card, or upload images. (An error code is indicated.) c See “Album error codes” (p. 105). It takes some time to load the album.
Specifications Bluetooth The number of registered devices available 3 Album on the Web Email Sending The maximum number of email destination addresses to which a message can be sent at one time 50 The registrable number of subjects 6 The maximum number of characters of a subject 24 The registrable number of messages 6 The maximum number of characters of a message 512 The maximum number of images attached to email 99 The maximum file size of images attached to email 3 MB Signature The number of characters 2
Messages Various messages appear on the screen. Check the corresponding descriptions in the following list. General Message Cause and/or Corrective Actions Bluetooth Connection Error • The Bluetooth device is too far from the camcorder. • The Bluetooth device is busy. Bluetooth Authentication Error Check the Certified Status Register the Bluetooth device again. Bluetooth Registration Error Check the Passkey • The pass key was wrong. • The pass key transmission failed.
Messages Message Cause and/or Corrective Actions Enter Password for DI Customer ID For details on “Verify Password,” see “Setting other preferences” (p. 42). Enter PPP Password Saving the Profile Do not turn off the camcorder while the message is indicated. Album on the Web Cause and/or Corrective Actions Album Server Disconnected Try again after a while. Upload Error Outgoing Mail Error Select Pictures Select the image or set up the invitation card before uploading (p. 47).
Messages Browser Message Cause and/or Corrective Actions You tried to open an SSL page. When you know that the page is safe, You are About to View Pages Over a Secure Connection tap [OK]. Do You Want to Continue? You are About to Leave a Secure Internet Connection Do You Want to Continue? Warrant Date Expired Invalid Data Open Anyway? Set the Date and Time Invalid Data Open Anyway? The clock is not set up on your camcorder. Set up the clock setting.
Album error codes ImageStation Cause Corrective Actions 1000 Authentication error occurred. Please check ID and Password. Login error. ID or password may be incorrect on your camcorder. Check your ID and password, and try to login again. 1001 Upload error occurred. Please try to upload again later. Error in finding album. Check your selection and try again. 1002 Your ID is not registered. Please register. ID is not registered.
Glossary Access point (p. 38, 40) A telephone number used to access the Internet, which is provided by an Internet service provider. Most providers install access points in various areas. We recommend that you select the most convenient access point which allows you to obtain the lowest telephone charges. Address book (p. 69) Used to register email destination addresses. APOP (p. 41) APOP is an authentication protocol for security. When your provider supports APOP, we recommend that you check this item.
Glossary Internet (p. 32) A worldwide network of computers. You can use email, information retrieval services, etc., over this network. Internet service provider (p. 32) Also referred to as a “Provider,” an “ISP,” etc. A company that provides access to the Internet. Link A related page address listed on a Web page as a Web link. POP3 (p. 41) An abbreviation for Post Office Protocol, Version 3. This is a server used to receive email. PPP (p. 39) An abbreviation for Point to Point Protocol, Version 3.
Setup memo Be careful not to reveal these entries. Network Menu Network Setup Example DI Customer Setup ID Password Provider Setup So-net TEL1 XXXXXXX TEL2 TEL3 Custom PPP ID abc123@xxx.so-net.com Password hcHZ7yd DNS1 192.168.0.1 DNS2 192.168.0.2 TEL No. 1 XXXXXXX TEL No. 2 TEL No. 3 Mail User ID abc123 Password hcHZ7yd Address abc123@xxx.so-net.com POP Server pop.xxx.so-net.com SMTP Server smtp.xxx.so-net.com Browser 108 Proxy proxy.xxx.so-net.
Online Privacy Policy Sony Electronics Inc. Effective: June 21, 2001 Last Update: November 15, 2001 Your Privacy Additional Information At Sony we believe our online visitors have a right to know our practices regarding the information we may collect when you visit our Web sites and what type of information is collected. The guidelines contained herein apply only to your visit to the Web sites operated by or for Sony Electronics Inc. and the entities it controls (collectively, “SEL”).
number held in a cookie) which is associated with individually identifiable information, to enable you to participate in contests, chat rooms, on bulletin boards, to fill out a registration, or to order products and services using these sites. SEL may combine the information you provide on our Web sites with information we may collect offline from you or from third parties so that we can more effectively tailor our site, services and offerings to you.
Notice To/Regarding Children Under the Age of 13 SEL believes that children using the Internet require special protection, and we urge parents or guardians to explain Internet safety to their children. Parents are urged to spend time online with their children to become familiar with the types of content available on the SEL sites and the Internet in general. Control tools are available from online services and software manufacturers to help create a safer environment for children.
agree to use personal information of site visitors only for the purposes of carrying out these operations and to keep such information confidential. A parent or guardian has the option of consenting to the collection and use of the child’s personal information without consenting to the disclosure of that information to third parties.
Questions If you have any questions or comments about our personal information practices or about this Privacy Statement, please feel free to send us an email at PIM@am.sony.com or write us at: Please check “http://www.sel.sony.com/SEL/legal/privacy.html” for the latest information. Additional Information Sony Electronics Inc.
ImageStation membership Agreement Membership Agreement (paper copy of terms as of November 2001 provided for convenience, please visit online for current terms). This Membership Agreement sets forth the terms and conditions on which ImageStation, a division of Sony Electronics Inc., offers products and services to registered users (each a “Member”) of the website “www.ImageStation.com.” PLEASE READ THIS MEMBERSHIP AGREEMENT CAREFULLY BEFORE REGISTERING TO BECOME A MEMBER.
user ID or another breach of security in relation to the Service. You may use the Service only for your personal, non-commercial use. You may not take the results from your use of the Service and link to them, or mirror pages from the Site on another website, or create links from other websites onto any area of the Site. 4.
explained in connection with such content and services. The Service and other content, product, services or information on the Site are presently available free of charge, exclusive of Internet or other telecommunications fees. ImageStation may, at its discretion, elect to modify, delete, reduce, augment, or discontinue the Service or any product, service, feature, functionality on the Site, or institute a fee, and will notify the Members of such change.
8. Responsibility for Member Content ImageStation does not as a policy review or screen any images, video, text, music, sound, audio files or other Member Content that a Member posts, displays or stores before they appear on the Site. ImageStation’s automated machinery and computers indexes the Member Content. ImageStation does not endorse the content or views expressed in any Member Content and is not responsible or liable in any manner for any conduct by any Member or for any Member Content.
10. Illegal Activities It is ImageStation’s policy to report suspected illegal activities to law enforcement agencies and to cooperate fully with their investigations. 11. Warranty, Disclaimer of Warranty The Service and the Site, including all content, products, services and information made available or accessed through the Site, are provided “AS IS”, with no warranties of any kind.
Some jurisdictions do not allow the exclusion or limitation of consequential or incidental damages, and therefore, the above limitation may not apply to you. Some Members may have additional rights.
You may not place any material protected by copyright anywhere on the Site without the express permission of the author or owner of the copyright in that material.
16. Indemnity 17.
19. Notices; Questions All notices from a Member to ImageStation shall be in writing, and shall be made or delivered to ImageStation via email or conventional mail If you have any question about the Service, this Membership Agreement, please feel free to contact us support @ImageStation.com. 20. Choice of Law This Membership Agreement shall be constructed and controlled by the laws of the State of California, excluding its conflict of law provisions.
Sony Corporation Printed in Japan 3 0 7 4 6 0 3 1 2
