Operating Guide

93
Troubleshooting
DCR-HC90 2-548-307-11(1)
You cannot use [D. EFFECT].
• You cannot use [D. EFFECT] together with:
– [SUPER NS]
– [COLOR SLOW S]
– [FADER]
• You cannot use [CINEMA EFECT], [SLOW SHUTTR], and [OLD MOVIE] together with
[PROGRAM AE] (except [AUTO]).
• You cannot use [OLD MOVIE] together with:
– [PICT. EFFECT]
• You cannot use [CINEMA EFECT] together with:
– [EXPOSURE] set to [MANUAL]
– Other than 0 in [AE SHIFT]
– [PROGRES.REC]
– [PICT. EFFECT]
You cannot use [SMTH INT.REC].
• You cannot use [SMTH INT.REC] when you use [CINEMA EFECT] or [DELAY
MOTION] from [D. EFFECT].
Dubbing/Editing/Connecting to other devices
Pictures from connected devices are not displayed on the LCD screen or the
viewfinder.
• Set [DISP OUTPUT] to [LCD PANEL] (p. 57).
• You cannot input a signal to your camcorder if you press DISP/BATT INFO while [DISP
OUTPUT] is set to [V-OUT/PANEL] (p. 57).
Pictures from connected devices cannot be zoomed.
• You cannot zoom the pictures from connected devices on your camcorder (p. 25).
Time code and other information appears in the display of the connected
device.
• Set [DISP OUTPUT] to [LCD PANEL] while connected with an A/V connecting cable (p.
57).
You cannot dub correctly using the A/V connecting cable.
• Set [DISP OUTPUT] to [LCD PANEL] (p. 57).
• The A/V connecting cable is not connected properly. Make sure that the A/V connecting
cable is connected to the proper jack, i.e. to the output jack of a device you are dubbing
a picture from, or to the input jack of another device for dubbing a picture from your
camcorder.
Continued 