Operating Guide

18
DCR-HC90 2-548-307-11(1)
“Memory Stick Duo”
You can use only a “Memory Stick
Duo” marked with or
(p. 106).
• The number and time of recordable pictures
varies depending on the image quality or the
image size. For details, see page 45.
1 Slide the battery/“Memory Stick
Duo” cover in the direction of the
arrow to open it.
1
2
Be sure to open the cover completely.
2 Insert the “Memory Stick Duo”
into the “Memory Stick Duo”
slot in the right direction until it
clicks.
Access lamp
With the

mark in the left
• If you force the “Memory Stick Duo”
into the slot in the wrong direction, the
“Memory Stick Duo,” the “Memory Stick
Duo” slot, or image data may be damaged.
3 Close the battery/”Memory Stick
Duo” cover.
Be sure to close the cover completely.
To eject a “Memory Stick Duo”
Open the battery/“Memory Stick Duo”
cover. Lightly push the “Memory Stick
Duo” in once.
• When the access lamp is lit or flashing, your
camcorder is reading/writing data. Do not shake
or knock your camcorder, turn the power off,
eject the “Memory Stick Duo,” or remove the
battery pack. Otherwise, image data may be
damaged.
Step 7: Inserting a tape or a “Memory Stick Duo” (continued)