Camera Operations Guide
Table Of Contents
- Read this first
- Quick Start Guide
- Getting started
- Recording
- Playback
- Customizing Your Camcorder
- Changing the menu settings
- Using the (MANUAL SET) menu – PROGRAM AE/P EFFECT, etc.
- Using the (CAMERA SET) menu – D ZOOM/16:9WIDE, etc.
- Using the (VCR SET) menu – HiFi SOUND/AUDIO MIX
- Using the (LCD/VF SET) menu – LCD B.L./LCD COLOR/VF B.L.
- Using the (CM SET) menu – TITLE/TAPE TITLE/ERASE ALL, etc.
- Using the (TAPE SET) menu – REC MODE/FRAME REC/INT.REC, etc.
- Using the (SETUP MENU) menu – CLOCK SET/ USB STREAM/LANGUAGE, etc.
- Using the (OTHERS) menu – WORLD TIME, etc.
- Dubbing/Editing
- Troubleshooting
- Additional Information
- Quick Reference
Quick Reference
96
WARNING
Battery may explode if mistreated. Do not
recharge, disassemble or dispose of in fire.
b Notes on the Remote Commander
• A button-type lithium battery (CR2025) is used in
the Remote Commander. Do not use batteries other
than CR2025.
• Point the remote sensor away from strong light
sources such as direct sunlight or overhead lighting.
Otherwise, the Remote Commander may not
function properly.
• The Remote Commander may not function properly
when the remote sensor is obstructed with a
conversion lens (optional).
• When you are operating with the Remote
Commander supplied with your camcorder, your
VCR may also operate. In that case, select a
commander mode other than VTR 2 for your VCR,
or cover the sensor of your VCR with black paper.