Camera Operations Guide
Table Of Contents
- Read this first
- Quick Start Guide
- Getting started
- Recording
- Playback
- Customizing Your Camcorder
- Changing the menu settings
- Using the (MANUAL SET) menu – PROGRAM AE/P EFFECT, etc.
- Using the (CAMERA SET) menu – D ZOOM/16:9WIDE, etc.
- Using the (VCR SET) menu – HiFi SOUND/AUDIO MIX
- Using the (LCD/VF SET) menu – LCD B.L./LCD COLOR/VF B.L.
- Using the (CM SET) menu – TITLE/TAPE TITLE/ERASE ALL, etc.
- Using the (TAPE SET) menu – REC MODE/FRAME REC/INT.REC, etc.
- Using the (SETUP MENU) menu – CLOCK SET/ USB STREAM/LANGUAGE, etc.
- Using the (OTHERS) menu – WORLD TIME, etc.
- Dubbing/Editing
- Troubleshooting
- Additional Information
- Quick Reference
Playback
34
Playback
Viewing pictures
recorded on a tape
Make sure you have a recorded tape inserted
into your camcorder.
Some of the operations are possible using the
Remote Commander or using the touch
panel.
When you want to play back recordings on
your TV, see page 39.
z Tip
• Performing Easy Handycam operation, even first
time users can play back easily. For details, see
page 36.
1 Open the LCD panel.
2 Slide the POWER switch repeatedly
until the PLAY/EDIT lamp lights up.
3 Touch (rewind) to go to the point
you want to view.
4 Touch (play) to start playback.
To adjust the volume
1
Touch to display [PAGE1].
2 Touch [VOL].
3 Adjust the volume by touching
(decrease) / (increase), then touch
.
4 Touch .
To stop playback
Touch (stop).
To pause
Touch (pause) during playback. Touch it
again to restart the playback.
Playback stops automatically when the pause
mode continues for more than 5 minutes.
To fast forward or rewind
Touch (fast forward) or (rewind) in
stop mode.
To review movies on the viewfinder
Close the LCD panel. Then, extend the
viewfinder.
POWER switch
Slide the POWER
switch while
pressing the green
button.
FN
0:00:00:0060min
60min