Manual

You can select the maxhnum zoom level in
case you want to zoom greater than optical
zoom magnification (p. 36). Note that the
image quality decreases when you use the
digital zoom.
W/M I .1
The riglu side of the barshows the digital
zooming factor.The zooming zoneappears
when you sdect the zooming level.
For DCR-DVD108/DVD608
_OFF
LIpto 40 x zoom is performed optically.
80,,
Up to 40× zoom isperformed optically, and
after that up to 80 × zoom is performed
digitally.
2000x
Up to 40× zoom isperformed optically_and
after that, up to 2,000 x zoom ix performed
digitally.
For DCR-DVDa0g/DVD708
_OFF
Lipto 25 × zoom is performed optically.
50×
Up to 25× zoom ixperformed optically, and
after that up to 50 × zoom is perfl)rmed
digitally.
2000×
Lipto 25 × zoom isperformed optically, and
after that, up to 2,000 × zoom ix performed
digitally.
You can compensate for camera shake (the
default setting is [ON]). Set
[STEADYSHOT] to [OFF] ('0_' ) when
using a tripod (optional), then the image
becomes naturah
When this is set to ION] (the default
setting), the shutter speed is automatically
reduced to 1130 second when recording in
clark conditions.
AUTO
Displays the remaining disc indicalor for
about 8 seconds in situalions such as Ihose
described below.
When your camcorder recognizes the
remaining disc capacity with the POWER 3
E:
swilch set to _ (Movie).
When you press DISP/BATT INFO Io ,._
swilch Ihe indicalor from off Io on with ____
the POWER swilch sel Io _ (Movie).
When you select the movie recording 3
mode on the HOME MENU.
ON
Always disphlys Ihe remaining disc
indicalor.
0 Notes
• When ll_eremaining recor&,bletime tbr movies
is less than 5 nlinutes, the indicalorslayson the
screell.
Select ION] (the default setting) to display
the recording date and time when you play
back a disc on a device with a subtitle
display function. Also refer to the
instruction manual of the playback device.
65