3-285-366-11(1) Digital Video Camera Recorder Enjoying with Your Camcorder 12 Getting Started 20 Recording/Playback 34 Operating Guide DCR-DVD610/DVD710/ DVD810 Editing 50 Utilizing Media 66 Customizing Your Camcorder 78 Performing with Your Computer 97 US Troubleshooting 101 Additional 114 Information Quick 129 Reference Spanish Quick Guide/ 140 Guía rápida en español Additional information on this product and answers to frequently asked questions can be found at our Customer Support Web
IMPORTANT SAFEGUARDS WARNING To reduce fire or shock hazard, do not expose the unit to rain or moisture. For your protection, please read these safety instructions completely before operating the appliance, and keep this manual for future reference. Carefully observe all warnings, precautions and instructions on the appliance, or the one described in the operating instructions and adhere to them.
Cleaning Unplug the set from the wall outlet before cleaning or polishing it. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the set. Installation Water and Moisture Do not use power-line operated sets near water – for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc.
Read this before operating your camcorder Before operating the unit, please read this manual thoroughly, and retain it for future reference. WARNING Do not expose the batteries to excessive heat such as sunshine, fire or the like. CAUTION The use of optical instruments with this product will increase eye hazard. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Replace the battery with the specified type only.
Declaration of Conformity Trade Name: SONY Model No.: DCR-DVD810 Responsible Party:Sony Electronics Inc. Address: 16530 Via Esprillo, San Diego, CA 92127 U.S.A. Telephone No.: 858-942-2230 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Read this before operating your camcorder (Continued) discs or discs with a *(for VIDEO CAMERA) mark for your camcorder. * Depending on the place you purchase, the disc has mark. b Note • Using a disc other than the above may cause the unsatisfactory recording/playback or you may not be able to remove the disc from your camcorder. Types of “Memory Stick” you can use in your camcorder • Do not attach a label or the like on a “Memory Stick PRO Duo” or a Memory Stick Duo adaptor.
About menu items, LCD panel, viewfinder, and lens • A menu item that is grayed out is not available under the current recording or playback conditions. • The LCD screen and the viewfinder are manufactured using extremely highprecision technology, so over 99.99% of the pixels are effective. However, there may be some tiny black points and/or bright points (white, red, blue, or green in color) that appear constantly on the LCD screen and the viewfinder.
Read this before operating your camcorder (Continued) MTF = Modulation Transfer Function. The number value indicates the amount of light from a subject coming into the lens. About this manual • The LCD screens and the viewfinder images and indicators shown in this manual were taken with a digital still camera, and may look different from what you actually see. • Discs in this manual refers to 8cm DVD discs.
Table of Contents Read this before operating your camcorder ..................................... 4 Table of Contents ........................... 9 Subject examples and solutions ... 11 Recording in dark places (NightShot plus) .......................................... 41 Adjusting the exposure for backlit subjects .................................... 41 Recording in mirror mode ........... 41 Playback .......................................
Table of Contents (Continued) Recording additional movies after finalizing .................................... 74 Finding the right disc (DISC SELECT GUIDE) ....................................... 75 Repairing the image database file .................................................... 76 Preventing data on the internal memory from being recovered (DCR-DVD810) .......................... 77 Customizing Your Camcorder What you can do with the (SETTINGS) category of the HOME MENU ........................
Subject examples and solutions Shooting Flowers in close-up B PORTRAIT ...................................... 94 B FOCUS............................................ 92 B TELE MACRO ................................. 92 Focusing on the dog on the left side of the screen B FOCUS............................................ 92 B SPOT FOCUS.................................. 92 Getting a good shot of a ski slope or beach B BACK LIGHT ................................... 41 B BEACH................................
Enjoying with Your Camcorder Enjoy using various “Media” according to your needs Selecting media You can select desired media for recording/playback/editing from the internal memory (DCRDVD810), a disc or a “Memory Stick PRO Duo” (p. 28). To set the media for movies or still images, you can select either [MOVIE MEDIA SET] or [PHOTO MEDIA SET] (DCRDVD810) according to your needs.
Media for your camcorder With your camcorder, you can record images on either the internal memory (DCR-DVD810), an 8cm DVD-RW, DVD+RW, DVD-R or DVD+R DL disc, or a “Memory Stick PRO Duo.” See page 6 for the types of “Memory Stick” you can use in your camcorder. When you use a DVD-RW, you can choose the recording format from VIDEO mode or VR mode. In this manual, VIDEO mode is indicated as and VR mode as . A recording format that is compatible with most DVD devices, especially after finalizing.
Media for your camcorder (Continued) Recording time of movies Figures in the table are the approximate recording time in minutes using the internal memory (DCR-DVD810) and on one side of a disc. The recordable time on the acceptable media varies depending on media type and the [REC MODE] (p. 80) setting. Figures in ( ) are the minimum recording time.
Using your camcorder 1Selecting media (p. 28) You can select media separately for movies and still images. In the case of recording on a disc, select the disc that best suits your needs. Yes No Do you want to delete images and reuse the disc? Yes No Enjoying with Your Camcorder Do you want to delete or edit images on your camcorder? For long recording * Select the recording format and format the disc on your camcorder (p. 30). zTips • You can select the disc from [DISC SELECT GUIDE] (p. 75).
Using your camcorder (Continued) 4Viewing on other devices x Viewing images on a TV (p. 48) You can view the images recorded and edited on your camcorder on the connected TV. x Playing the disc on other devices (p. 70) To play a disc recorded on your camcorder on other devices, you need to finalize the disc first. bNotes • The less the recording volume of the disc is, the more it takes time to finalize the disc. The features of a finalized disc depend on disc type.
“ HOME” and “ OPTION” - Taking advantage of two types of menus “ HOME MENU” - the starting point for operations with your camcorder Category Enjoying with Your Camcorder (HELP) Displays a description of the item (p.
“ HOME” and “ (Continued) OPTION” - Taking advantage of two types of menus Using the HOME MENU 1 While pressing the green button, 4 Touch the desired item. Example: [EDIT] turn the POWER switch in the direction of the arrow to turn on your camcorder. 5 Follow the guide on the screen for further operation. To hide the HOME MENU screen 2 Press Touch (HOME) A (or B). (HOME) A . When you want to know something about the function of each item on the HOME MENU - HELP 1 Press (HOME).
3 Touch the item you want to know the content. To apply the option, touch [YES], otherwise, touch [NO]. Enjoying with Your Camcorder When you touch an item, its explanation appears on the screen. To deactivate the HELP Touch (HELP) again in step 2. Using the OPTION MENU Just a touch on the screen during shooting or playback displays the functions available at that moment. You will find it easy to make various settings. See page 90 for further details.
Getting Started Step 1: Checking supplied items Make sure that you have the following items supplied with your camcorder. The number in the parentheses indicates the number of that item supplied. Rechargeable battery pack NP-FH40 (1) (p. 21) AC Adaptor (1) (p. 21) CD-ROM “Handycam Application Software” (1) (p. 97) – Picture Motion Browser (Software) – PMB Guide Power cord (mains lead) (1) (p. 21) A/V connecting cable (1) (p. 48, 62) USB cable (1) (p.
Step 2: Charging the battery pack POWER switch DC IN jack Getting Started Battery CHG (charge) lamp Jack cover To the wall outlet (wall socket) AC Adaptor DC plug You can charge the “InfoLITHIUM” battery pack (H series) (p. 119) after attaching it to your camcorder. b Notes • Your camcorder operates only with “InfoLITHIUM” battery pack (H series). 1 Turn the POWER switch in the direction of the arrow to OFF (CHG) (the default setting).
Step 2: Charging the battery pack (Continued) To remove the battery pack Remaining battery (approx.) 1 Turn the POWER switch to OFF (CHG). 2 Slide the BATT (battery) release lever (1) and remove the battery pack (2). Recording capacity (approx.) BATT (battery) release lever b Notes • When you remove the battery pack or the AC Adaptor, make sure that the (Movie) lamp/ (Still) lamp (p. 25)/ACCESS lamp (p. 30)/ access lamp (p. 32) are turned off.
DCR-DVD710/DVD810 Battery pack Continuous recording time Typical recording time* NP-FH40 (supplied) 95 45 110 50 NP-FH50 110 50 * Typical recording time shows the time when you repeat recording start/stop, turning the power on/off and zooming. b Notes 130 60 NP-FH70 235 110 280 130 Playing time NP-FH100 535 255 625 300 Approximate time (min.) available when you use a fully charged battery pack.
Step 2: Charging the battery pack (Continued) When playing a disc • We do not recommend using an NP-FH30, which only allows short recording and playback times, with your camcorder.
Step 3: Turning the power on, and setting the date and time Set the date and time when using this camcorder for the first time. If you do not set the date and time, the [CLOCK SET] screen appears every time you turn on your camcorder or change the POWER switch position. Touch the button on the LCD screen. 3 Select the desired geographical area with [NEXT]. / , then touch 4 Set [DST SET] or [SUMMERTIME], then touch [NEXT].
Step 3: Turning the power on, and setting the date and time (Continued) b Notes • If you do not use your camcorder for about 3 months, the built-in rechargeable battery gets discharged and the date and time settings may be cleared from the memory. In that case, charge the built-in rechargeable battery and then set the date and time again (p. 124). • It takes a few seconds for your camcorder to be ready to shoot after the power is turned on. You cannot operate your camcorder during this time.
to save battery power. The recorded image will not be affected by the setting. To turn on the LCD backlight, press and hold DISP/ BATT INFO for a few seconds until disappears. z Tips • You can adjust the brightness of the viewfinder backlight by touching (HOME) t (SETTINGS) t [SOUND/DISP SET] t [VF B.LIGHT] (p. 86).
Step 5: Selecting media You can set the media to be used for movies and still images separately. For movies, you can select the internal memory*, a disc, or a “Memory Stick PRO Duo.” For still images, you can select the internal memory*, or a “Memory Stick PRO Duo.” DCR-DVD610/DVD710 In the default setting, movies are recorded on a disc. Still images are recorded on a “Memory Stick PRO Duo” only. DCR-DVD810 In the default setting, both movies and still images are recorded on the internal memory.
Selecting media for still images (DCR-DVD810) 1 Touch (HOME) t (MANAGE MEDIA) t [PHOTO MEDIA SET]. To confirm the selected media 1 Slide the POWER switch to turn on the lamp of the mode ( (Movie)/ (Still)) that you want to check the media. 2 Confirm the media icon displayed at the upper right corner of the screen. 2 Touch the desired media. b Notes • You cannot select a disc for the still image media. 3 Touch [YES]. Media icon Getting Started The still image media setting screen appears.
Step 6: Inserting a disc or a “Memory Stick PRO Duo” When you select [INT. MEMORY] in “Step 5,” this “Step 6” operation is unnecessary (DCR-DVD810). Inserting a disc 3 Set the disc with the recording side facing your camcorder, then press the center of the disc until it clicks. When you select [DISC] in “Step 5,” a new 8 cm DVD-RW, DVD+RW, DVD-R, or DVD+R DL is required (p. 13). b Notes • Remove dust or fingerprints from the disc beforehand, using a soft cloth (p. 118).
5 Touch the option that is right for you on the screen. x DVD-RW Select the recording format, [VIDEO] . or [VR] (p. 13), then touch Select the aspect ratio of the movie, . [16:9 WIDE] or [4:3], then touch 6 Touch [YES]. 7 When [Completed.] is displayed, touch . When the formatting is completed, you can start recording on the disc. z Tips • When you use a DVD-RW while the Easy Handycam operation (p. 34) is set, the recording format is fixed to VIDEO mode.
Step 6: Inserting a disc or a “Memory Stick PRO Duo” (Continued) Inserting a “Memory Stick PRO Duo” This operation is necessary only when you select [MEMORY STICK] in “Step 5.” See page 6 on the “Memory Stick” you can use with your camcorder. z Tips • If you record only still images on the “Memory Stick PRO Duo,” operations after step 3 are unnecessary. 3 If you select [MEMORY STICK] in “Step 5” for movie recording, slide the POWER switch repeatedly until the (Movie) lamp lights up.
To remove the “Memory Stick PRO Duo” Open the LCD panel and Memory Stick Duo cover. Lightly push the “Memory Stick PRO Duo” in once, then slide it out of the slot. b Notes • Numbers in the table are of when using a “Memory Stick PRO Duo” made by Sony Corporation. The recordable time varies depending on the recording conditions, the type of “Memory Stick,” or the [REC MODE] setting (p. 80). • When the recordable time is less than 5 minutes, appears.
Recording/Playback Recording and playing back with ease (Easy Handycam operation) Easy Handycam operation makes nearly all settings automatic so that you can perform recording or playing back operation without detailed settings. It also makes the screen font size larger for easy viewing. The images are recorded on the selected media (p. 28). If the POWER switch is set to OFF (CHG), turn it while pressing the green button.
Playing back recorded movies/still images 1 Turn the POWER switch G to turn on your camcorder. 2 Press (VIEW IMAGES) I (or D). The VISUAL INDEX screen appears on the screen. (It may take some time to display the thumbnails.) Film Roll Index (p. 45) Face Index (p. 45) Previous 6 images Appears with the image on each of the tab that was lastly played back/recorded (B for the still image recorded on “Memory Stick PRO Duo”). Next 6 images Returns to the recording screen. Displays movies.
Recording and playing back with ease (Easy Handycam operation) (Continued) zTips • When playback from the selected movie reaches the last movie, the screen returns to the VISUAL INDEX screen. • You can slow down the playback speed by touching / during pause. • You can adjust the volume by touching (HOME) t (SETTINGS) t [SOUND SETTINGS] t [VOLUME], then with / . • You can change the movie media with [MOVIE MEDIA SET] (p. 28). Still images: Touch the tab and the still image to be played back.
To cancel Easy Handycam operation Press EASY A again. from the screen. disappears Menu settings during Easy Handycam operation Touch (HOME) C (or B) to display the menu items available for setup changes (p.17, 78). b Notes Invalid buttons during Easy Handycam operation Recording/Playback • Most of the menu items automatically return to the default settings. The settings of some menu items are fixed. For details, see page 79. • DVD-RW is formatted with VIDEO mode (p. 13).
Recording The images are recorded on the media selected on the media setting (p. 28). DCR-DVD610/DVD710 In the default setting, movies are recorded on a disc. Still images are recorded on a “Memory Stick PRO Duo” only. DCR-DVD810 In the default setting, both movies and still images are recorded on the internal memory. Open the lens cover (p. 26). PHOTO F START/STOP B (HOME) E (HOME) D POWER switch A If the POWER switch is set to OFF (CHG), turn it while pressing the green button.
Movies Still Images 1 Turn the POWER switch A until the (Movie) lamp lights up. 2 Press START/STOP B (or C). 1 Turn the POWER switch A until the (Still) lamp lights up. 2 Press PHOTO F lightly to adjust the focus A (a beep sounds), then press it fully B (a shutter click sounds). To stop recording, press START/STOP again. Flashing t Lights up Recording/Playback [STBY] t [REC] appears next to or . When disappears, the image has been recorded. b Notes • You cannot record still images on a disc.
Recording (Continued) Zooming You can zoom in up to the magnifications shown in the following table. (optical zoom) DCR-DVD610 40 × DCR-DVD710/DVD810 25 × You can adjust the magnification with the power zoom lever or the zoom button on the LCD frame. focus is about 1 cm (about 13/32 in.) for wide angle and about 80 cm (about 2 5/8 feet) for telephoto. z Tips • Using [DIGITAL ZOOM] (p. 81), you can zoom in further than the magnification shown in the table when recording movies.
Starting to record quickly (QUICK ON) To record in dark places, set the NIGHTSHOT PLUS switch to ON to display . b Notes QUICK ON lamp b Notes • While the camcorder is in sleep mode, the power consumption will be about half that used during recording. You can save the battery power. • If you do not operate your camcorder and leave it in sleep mode for a while, your camcorder automatically turns off. With [QUICK ON STBY], you can set the time after which the camcorder turns off in sleep mode (p. 89).
Recording (Continued) Open the LCD panel 90 degrees to the camcorder (1), then rotate it 180 degrees to the lens side (2). z Tips • A mirror-image of the subject appears on the LCD screen, but the image will be normal when recorded. • When recording in mirror mode, the images are not displayed in the viewfinder.
Playback You can play back images recorded on the media selected in the media setting (p. 28). DCR-DVD610/DVD710 In the default setting, movies on a disc are played. Still images are recorded and played on a “Memory Stick PRO Duo” only. DCR-DVD810 In the default setting, images in the internal memory are played. Power zoom lever F POWER switch A Recording/Playback (HOME) D (HOME) E (VIEW IMAGES) B (VIEW IMAGES) C 1 Turn the POWER switch A to turn on your camcorder. 2 Press (VIEW IMAGES) B (or C).
Playback (Continued) z Tips • The number of the images on the VISUAL INDEX screen can be changed 6 y 12 by moving the power zoom lever F. To fix this number, touch (HOME) D (or E) t (SETTINGS) t [VIEW IMAGES SET] t [ DISPLAY] (p. 85). 3 Start playback. Movies Touch the tab and the movie to be played back. When playback from the selected movie reaches the last movie, the screen returns to the VISUAL INDEX screen. Returns to the VISUAL INDEX screen.
To adjust the sound volume of movies While playing back movies, touch (OPTION) t tab t [VOLUME], then adjust the volume with / . 4 Touch / to search for the desired scene. Playback starts from the selected scene. z Tips • You can switch screen to the VISUAL INDEX screen by touching (HOME) D (or E) t (VIEW IMAGES) t [VISUAL INDEX]. Movies can be divided by a set time, and the first scene of each division is displayed on the INDEX screen. You can start playing back a movie from the selected scene.
Playback (Continued) 4 Touch / to search for the desired face image, then select the face image of the scene you want to play back. Playback starts from the selected scene. 2 To search for movies, touch the tab. To search for still images, touch the tab. 3 Touch the date button at the upper right corner of the screen. b Notes • Faces may not be detected depending on recording conditions. Example: People wearing glasses or hats, or not facing towards the camera.
b Notes • You cannot operate playback zoom during slide show. z Tips 1 Play back the still image you want to magnify. 3 Touch the screen at the point you want to display in the center of the displayed frame. 4 Adjust the magnification with W (Wide angle)/T (Telephoto). To cancel, touch Recording/Playback 2 Magnify the still image with T (Telephoto). The screen is framed. • You can also play back the slide show by touching (OPTION) t tab t [SLIDE SHOW] on the VISUAL INDEX screen.
Playing the images on a TV Connect your camcorder to the input jack of a TV or VCR using the A/V connecting cable 1 or an A/V connecting cable with S VIDEO 2. Connect your camcorder to the wall outlet (wall socket) using the supplied AC Adaptor for this operation (p. 21). Refer also to the instruction manuals supplied with the devices to be connected.
b Notes • When you connect your camcorder to a TV compatible with the ID-1/ID-2 system, set [TV TYPE] to [16:9]. The TV switches to full mode automatically. Refer also to the instruction manuals supplied with your TV. • When you set [TV TYPE] to [4:3], the image quality may deteriorate. Also, when the recorded image’s aspect ratio switches between 16:9 (wide) and 4:3, the image may jitter.
Editing (OTHERS) category This category enables you to edit or print images on the media, or copy them onto your computer for viewing, editing or creating an original DVD. PLAYLIST EDIT You can create and edit a Playlist (p. 59). PRINT You can print still images on a connected PictBridge printer (p. 64). USB CONNECT (OTHERS) category b Notes • You can select the media of the image to be edited by touching (HOME) t (MANAGE MEDIA) t [MOVIE MEDIA SET]/[PHOTO MEDIA SET] (p. 28).
Deleting images b Notes 5 Touch • You cannot restore images once they are deleted. z Tips t [YES]. 6 When [Completed.] appears, • You can select up to 100 images at one time. touch . Deleting movies To delete all movies at one time Select beforehand the media which contains the movie you want to delete (p. 28). 1 In step 3, touch [ b Notes 2 Touch [YES] t [YES]. • When you select [DISC] on [MOVIE MEDIA SET] (p. 28), you cannot delete movies during Easy Handycam operation (p. 34).
Deleting images (Continued) To delete the most recently recorded movie 1 Touch 1 In step 3, touch [ DEL]. 2 Touch [ DELETE]. 3 Touch [ DELETE]. 2 Touch (HOME) t (OTHERS) t [DELETE]. LAST SCENE t [YES]. 3 When [Completed.] appears, touch . You cannot delete the most recently recorded movie: – if you remove the disc from your camcorder after recording. – if you turn off your camcorder after recording. 4 Touch the still image to be deleted.
Capturing a still image from a movie To delete all the still images recorded on the same day at one time 1 In step 3, touch [ You can capture a still image at any point during movie playback. Select the media which contains the movies beforehand, and the media where you want to save the still images (p. 28). When you select [MEMORY STICK] to save the still images, insert a “Memory Stick PRO Duo” beforehand. The media you can select depends on your camcorder model. See the table below. DELETE by date].
Capturing a still image from a movie (Continued) 2 Touch the movie that you want to play back and capture an image from. The selected movie is played back. 3 Touch to pause at the point where you want to capture. The movie pauses. Play and pause toggles as you press . Adjusts the capturing point with more precision after the capturing point has been selected with . Returns to the beginning of the selected movie. 4 Touch . appears while the still image is captured and stored on the media you selected.
Dubbing/copying images to media within your camcorder The [MOVIE DUB] screen appears. Dubbing movies You can dub movies from the internal memory (DCR-DVD810) or a “Memory Stick PRO Duo” to a disc. Insert a disc in your camcorder beforehand. The media you can select depends on your camcorder model. See the table below. Model DCRDVD610/ DVD710 DCRDVD810 From To t 2 DCR-DVD810: Touch media which contains the movie to be dubbed.
Dubbing/copying images to media within your camcorder (Continued) If the disc space is not sufficient to record the entire movie, [Not enough memory space.] appears. 5 Touch 2 Touch [YES]. 3 When [Completed.] appears, touch To back up movies that have not been backed up yet t [YES]. 1 In step 3, touch [BACKUP]. 2 Touch [Backs up unbacked up movies.] t [YES]. 6 When [Completed.] appears, touch . . To dub all the movies recorded on the same day at one time 3 When [Completed.] appears, touch .
z Tips • To check the copied still images, select [MEMORY STICK] on [PHOTO MEDIA SET] (p. 28). To copy all the still images recorded on the same day at one time 1 In step 2, touch [COPY by date]. 1 Touch (HOME) t (OTHERS) t [PHOTO COPY]. The [PHOTO COPY] screen appears. Previous/Next date 3 Touch the still image to be copied. Editing 2 Touch [COPY by select]. 2 Touch / to select the recording date of the desired still images, then touch .
Dividing movies b Notes Select beforehand the media which contains the movie you want to divide (p. 28). 1 Touch (HOME) t (OTHERS) t [EDIT]. 2 Touch [DIVIDE]. 3 Touch the movie that you want to divide. The selected movie is played back. z Tips 4 Touch at the point where you want to divide. The movie pauses. Play and pause toggles as you press . Adjusts the dividing point with more precision after the dividing point has been selected with . Returns to the beginning of the selected movie.
Creating the Playlist 4 Touch A Playlist is a list showing thumbnails of the movies that you have selected. The original scenes are not changed even though you edit or delete the movies in the Playlist. Select beforehand the media to use to create, play, or edit a Playlist (p. 28). t [YES]. 5 When [Completed.] appears, touch . To add all the movies to the Playlist z Tips 1 In step 2, touch [ 3 When [Completed.] appears, touch .
Creating the Playlist (Continued) b Notes • Do not remove the battery pack or the AC Adaptor from your camcorder while adding the movies. • Do not remove the “Memory Stick PRO Duo” while adding movies in the “Memory Stick PRO Duo.” • You cannot add still images to a Playlist. z Tips • You can add a movie when viewing it by touching (OPTION). • You can copy the Playlist to a disc as it is, by using the supplied software.
To change the order within the Playlist To divide a movie in the Playlist 1 Touch (HOME) t t [PLAYLIST EDIT]. 1 Touch (HOME) t t [PLAYLIST EDIT]. 2 Touch [ (OTHERS) MOVE]. (OTHERS) 2 Touch [DIVIDE]. 3 Select the movie that you want to move. 3 Touch the movie that you want to divide. The selected movie is played back. 4 Touch at the point where you want to divide. The movie pauses. Play and pause toggles as you press . . Press and hold the movie on the screen to confirm. Touch screen.
Dubbing movies to VCR or DVD/HDD recorders Connecting a device with the A/V connecting cable You can dub movies played back on your camcorder to other recording devices, such as VCRs or DVD/HDD recorders. Connect the device in either of the following ways. Connect your camcorder to the wall outlet (wall socket) using the supplied AC Adaptor for this operation (p. 21). Refer also to the instruction manuals supplied with the devices to be connected.
touch (HOME) t (SETTINGS) t [OUTPUT SETTINGS] t [DISP OUTPUT] t [LCD PANEL] (the default setting) (p. 87). • To record the date/time and camera settings data, display them on the screen (p. 84). • When you are connecting your camcorder to a monaural device, connect the yellow plug of the A/V connecting cable to the video input jack, and the red (right channel) or the white (left channel) plug to the audio input jack on the device. 1 Turn on your camcorder. the movie you want to dub (p. 28).
Dubbing movies to VCR or DVD/ HDD recorders (Continued) 2 Connect the (USB) jack of your camcorder to a DVD writer, etc. using the supplied USB cable (p. 129). The [USB SELECT] screen appears on the screen. 3 Touch media which contains the movie to be dubbed. 4 Start recording on the connected Printing still images (PictBridge compliant printer) You can print out still images using a PictBridge compliant printer, without connecting the camcorder to a computer.
4 Touch the still image to be printed. To finish printing On the INDEX screen of still images, touch . b Notes The selected still image is marked with . Press and hold the still image on the screen to confirm. to return to the previous 5 Touch (OPTION), set the following options, then touch . [COPIES]: Set number of copies of a still image to be printed. You can set up to 20 copies. [DATE/TIME]: Select [DATE], [DAY&TIME], or [OFF] (no date/time printed). [SIZE]: Select the paper size.
Utilizing Media (MANAGE MEDIA) category This category enables you to use the media for various purposes. (MANAGE MEDIA) category Item list MOVIE MEDIA SET You can select the media for movies (p. 28). PHOTO MEDIA SET (DCR-DVD810) You can select the media for still images (p. 28). FINALIZE You can enable discs to be played on other devices by finalizing them (p. 67). MEDIA INFO You can display the media information, such as recordable time (p. 71).
Making the disc compatible with playback on other devices (Finalizing) Finalizing makes the recorded disc compatible for playback with other devices and DVD drives of computers. Before finalizing, you can select the style of the DVD menu which displays the movie list (p. 69). Finalizing is required depending on the type of disc. • DVD-RW/DVD-R/DVD+R DL: Finalizing is required.
Making the disc compatible with playback on other devices (Finalizing) (Continued) To add movies to a finalized disc (p.74) Movies cannot be added. Make a new recording Unfinalize the disc. Movies can be added as usual. When the DVD menu has been created, a confirmation screen prompts you to confirm that you wish to add movies. b Notes • During Easy Handycam operation (p. 34), even when you are using a DVD-RW or DVD+RW, you cannot record additional movies onto the disc after finalizing the disc.
Finalizing a disc b Notes • It takes from a minute to a maximum of several hours to finalize a disc. The shorter the amount of material recorded on the disc, the longer it takes for finalizing. 5 Touch [YES] t [YES]. Finalizing starts. 6 When finalizing is completed, touch . 1 Place your camcorder in a stable place, and connect the AC Adaptor to the DC IN jack on your camcorder. 2 Turn on your camcorder. 4 Touch (HOME) t (MANAGE MEDIA) t [FINALIZE].
Making the disc compatible with playback on other devices (Finalizing) (Continued) b Notes • During Easy Handycam operation (p. 34), the DVD menu style is fixed to [STYLE1]. • You cannot create a DVD menu for a DVD-RW (VR mode). Playing a disc on other devices Playing a disc on other devices Finalizing a disc (p. 67) allows you to view movies recorded by your camcorder on other DVD devices. However, we do not guarantee proper playback on all devices.
Checking media information z Tips • For details on operations and procedures, see the “PMB Guide” on the supplied CD-ROM (p. 97). You can check the remaining recordable time or space of the media selected on [MOVIE MEDIA SET] (p. 28). The volume label of the disc The date when the disc was first used is recorded. Touch (HOME) t (MANAGE MEDIA) t [MEDIA INFO]. When the disc was first used at 0:00 am on January 1st 2008: 2008_01_01_00H00M_AM You can check other information by touching .
Formatting media Formatting deletes all images and returns the recording media to its original empty state. To avoid the loss of important images, dub or copy them on other media (p. 55, 62) before performing [MEDIA FORMAT]. 6 When [Completed.] appears, touch . b Notes Formatting the internal memory (DCR-DVD810) or “Memory Stick PRO Duo” 1 Connect the AC Adaptor to the DC IN jack on your camcorder, then connect the power cord (mains lead) to the wall outlet (wall socket).
1 Connect the AC Adaptor to the DC IN jack on your camcorder, then connect the power cord (mains lead) to the wall outlet (wall socket). • You cannot format a disc that has been protected on other devices. Cancel the protection with the original device, and then format it. z Tips • When you format a DVD-RW during Easy Handycam operation (p. 34), the recording format is fixed to VIDEO mode. 2 Turn on your camcorder. 3 Insert the disc to be formatted into your camcorder.
Recording additional movies after finalizing 6 When [Completed.] appears, You can record additional movies on the finalized DVD-RW (VIDEO mode)/ DVD+RW discs after the following steps, if the disc has free space. When using the finalized DVD-RW (VR mode), you can record additional movies on the disc without any additional steps. b Notes • You cannot record additional movies on the DVD-R/DVD+R DL after finalizing. Use a new disc.
Finding the right disc (DISC SELECT GUIDE) b Notes • Do not apply shock or vibration to your camcorder, and do not disconnect the AC Adaptor during the operation. • A DVD menu created during finalizing is deleted. • For a double-sided disc, perform these steps for each side of the disc. Select the option that is right for you on the screen, then you will be informed of the appropriate disc for your purposes. 1 Touch (HOME) t (MANAGE MEDIA) t [DISC SELECT GUIDE].
Repairing the image database file b Notes This function checks the image database file and the consistency of movies and still images on the internal memory (DCRDVD810), or movies in the “Memory Stick PRO Duo,” and repairs any inconsistencies found. 1 Touch (HOME) t (MANAGE MEDIA) t [REPAIR IMG.DB F.] t [INT. MEMORY] (DCR-DVD810) or [MEMORY STICK]. 2 Touch [YES]. Your camcorder will check the image database file. When mismatching is not found, touch to finish the operation. 3 Touch [YES].
Preventing data on the internal memory from being recovered (DCR-DVD810) [ EMPTY] allows you to write unintelligible data onto the internal memory. In this way, it may become more difficult to recover any original data. When you dispose of or give the camcorder to somebody, it is recommended that you perform [ EMPTY]. 4 Press and hold the . (BACK LIGHT) button down (p. 129). The [ EMPTY] screen appears. b Notes • If you perform [ EMPTY], all the images are deleted.
Customizing Your Camcorder What you can do with the (SETTINGS) category of the HOME MENU You can change the recording functions and the operating settings for your convenience. Using the HOME MENU 3 Touch the desired setup item. If the item is not on the screen, touch / to change the page. 1 Turn on your camcorder, then press (HOME). (HOME) 4 Touch the desired item. If the item is not on the screen, touch / to change the page.
List of the (SETTINGS) category items MOVIE SETTINGS (p. 80) SOUND/DISP SET*3 (p. 86) Items Page VOLUME*2 86 BEEP*2 86 Items Page LCD BRIGHT 86 REC MODE 80 LCD BL LEVEL 86 AUDIO MODE*1 80 LCD COLOR 86 NIGHTSHOT LIGHT 80 VF B.LIGHT 86 WIDE SELECT 80 DIGITAL ZOOM 81 STEADYSHOT 81 Items Page AUTO SLW SHUTTR 81 TV TYPE 87 GUIDEFRAME 81 DISP OUTPUT 87 REMAINING SET SUB-T DATE INDEX SET*2 81 82 82 Items IMAGE SIZE*2 Page 82 CLOCK/ LANG (p.
MOVIE SETTINGS (Items for recording movies) AUDIO MODE (DCRDVD710/DVD810) You can select audio recording format. B 5.1ch SURROUND ( ) Records 5.1ch surround sound. Touch 1, then 2. If the item is not on the screen, touch to change the page. / (HOME MENU) t page 78 (OPTION MENU) t page 90 The default settings are marked with B. REC MODE (Recording mode) You can select a recording mode to record a movie with the image quality from 3 levels. ) Records in high quality mode.
DIGITAL ZOOM You can select the maximum zoom level in case you want to zoom greater than optical zoom magnification. Note that the image quality decreases when you use the digital zoom. STEADYSHOT You can compensate for camera shake. Set [STEADYSHOT] to [OFF] ( ) when using a tripod (optional), then the image becomes natural. The default setting is [ON]. AUTO SLW SHUTTR (Auto slow shutter) The right side of the bar shows the digital zooming factor.
MOVIE SETTINGS (Continued) PHOTO SETTINGS (Items for recording still images) b Notes • When the remaining recordable time for movies is less than 5 minutes, the indicator stays on the screen. SUB-T DATE You can display the recording date and time when playing back a disc on a device with a subtitle display function. The default setting is [ON]. Also refer to the instruction manual of the playback device.
Number of still images recordable on the internal memory (DCR-DVD810) You can record up to 9,999 still images on the internal memory. The recordable number of still images varies depending on the recording condition. Number of still images recordable on a “Memory Stick PRO Duo” (approx.) 512MB 1GB 2GB 4GB 8GB 1.0M 1152 × 864 VGA (0.
PHOTO SETTINGS (Continued) VIEW IMAGES SET (Items to customize the display) REDEYE REDUC (Redeye reduction) (DCR-DVD710/DVD810) You can set this function when you record still images using an external flash (optional) that is compatible with your camcorder. If you set [FLASH MODE] (p. 83) to [AUTO] or [ON] when [REDEYE REDUC] is set to [ON], appears on the screen. You can prevent redeye by activating the pre-flash before recording.
CAMERA DATA DISPLAY Movie You can select the number of thumbnails that appear on the VISUAL INDEX or Playlist screen. Thumbnail Glossary (p. 135) B ZOOM LINK Changes the number of thumbnails (6 or 12) with the power zoom lever on your camcorder.* Still image 6IMAGES Displays thumbnails of 6 images. 12IMAGES Displays thumbnails of 12 images. z Tips • appears in the following cases.
SOUND/DISP SET (Items to adjust sound and the screen) LCD BL LEVEL (LCD backlight level) You can adjust the brightness of the LCD screen’s backlight. B NORMAL Standard brightness. Touch 1, then 2. If the item is not on the screen, touch to change the page. / Brightens the LCD screen. How to set b Notes (HOME MENU) t page 78 (OPTION MENU) t page 90 The default settings are marked with B. VOLUME Touch (p. 45).
OUTPUT SETTINGS (Items for when connecting other devices) b Notes • When you connect your camcorder to outside power sources, [BRIGHT] is automatically selected for the setting. • When you select [BRIGHT], battery life is slightly reduced during recording. z Tips • This adjustment does not affect the recorded images in any way. Touch 1, then 2. If the item is not on the screen, touch to change the page. / How to set (HOME MENU) t page 78 The default settings are marked with B. TV TYPE See page 48.
CLOCK/ LANG GENERAL SET (Items to set clock and language) (Other setup items) Touch 1, then 2. If the item is not on the screen, touch to change the page. / How to set (HOME MENU) t page 78 CLOCK SET See page 25. AREA SET You can adjust a time difference without stopping the clock. Set your local area using / when using your camcorder in other time zones. Refer to the world time difference on page 115. DST SET/SUMMERTIME You can change this setting without stopping the clock.
A.SHUT OFF (Auto shut off) B 5min The camcorder is automatically turned off when you do not operate your camcorder for more than approximately 5 minutes. NEVER The camcorder is not automatically turned off. b Notes • When you connect your camcorder to a wall outlet (wall socket), [A.SHUT OFF] is automatically set to [NEVER]. QUICK ON STBY b Notes • [A.SHUT OFF] does not work in sleep mode (p. 41). REMOTE CTRL (Remote control) (DCR-DVD710/ DVD810) You can use the supplied Remote Commander (p. 132).
Activating functions using the The OPTION MENU appears just like the pop-up window that appears when you right-click the mouse on a computer. Various functions are displayed. Using the OPTION MENU 1 While using your camcorder, touch (OPTION) on the screen. (OPTION) Tab 2 Touch the desired item. If you cannot find the desired item, touch another tab to change the page. If you cannot find the item anywhere, the function does not work under the current situation.
Recording items on the OPTION MENU * Items Page tab Viewing items on the OPTION MENU Items * Page tab FOCUS - 92 DELETE** a 51 SPOT FOCUS - 92 DELETE by date** a 51 TELE MACRO - 92 DELETE ALL** a 51 EXPOSURE - 93 SPOT METER - 93 SCENE SELECTION - 93 DIVIDE a 58 WHITE BAL. - 94 ERASE** a 60 COLOR SLOW SHTR - 95 ERASE ALL** a 60 S. NIGHTSHOT PLS - 95 MOVE** a 61 FADER - 95 ADD** a 59 D.EFFECT - 96 ADD by date** a 59 PICT.
Functions set in the OPTION MENU Items you can set only on the OPTION MENU will be described below. SPOT FOCUS The default settings are marked with B. You can select and adjust the focal point to aim it at a subject not located at the center of the screen. FOCUS You can adjust the focus manually. You can select this function also when you want to focus on a certain subject intentionally. 1 Touch [MANUAL]. 9 appears.
• Adjust the focus manually ([FOCUS], p. 92) when it is hard to focus automatically. b Notes • If you set [SPOT METER], [EXPOSURE] is automatically set to [MANUAL]. EXPOSURE You can fix the brightness of an image manually. Adjust the brightness when the subject is too bright or too dark relative to the background. SCENE SELECTION You can record images effectively in various situations with the [SCENE SELECTION] function.
Functions set in the LANDSCAPE* ( OPTION MENU (Continued) ) Select this to record distant subjects clearly. This setting also prevents your camcorder from focusing on glass or metal mesh in windows that comes in between the camcorder and the subject. PORTRAIT ( * Your camcorder is set to focus only on distant subjects. ** Your camcorder is set not to focus on nearby subjects. b Notes • The [WHITE BAL.] setting is cleared when you set [SCENE SELECTION]. WHITE BAL.
b Notes • Set [WHITE BAL.] to [AUTO] or adjust the color in [ONE PUSH] under white or cool white fluorescent lamps. • When you select [ONE PUSH], keep framing white object while is flashing quickly. • flashes slowly if [ONE PUSH] could not be set. • When [ONE PUSH] was selected, if keeps flashing after touching , set [WHITE BAL.] to [AUTO]. • If you set [WHITE BAL.], [SCENE SELECTION] is automatically set to [AUTO].
Functions set in the OPTION MENU (Continued) D.EFFECT (Digital effect) When you set [OLD MOVIE], appears and you can add an old movie effect to images. To cancel [D.EFFECT], touch [OFF]. PICT.EFFECT (Picture effect) You can add special effects to an image during recording. appears. B OFF ) Records surround sound faithfully. This setting is not suitable for recording conversations. SELF-TIMER When you set [SELF-TIMER] to [ON], appears on the screen.
Performing with Your Computer What you can do with Windows computer When you install the “Picture Motion Browser” on a Windows computer from the supplied CD-ROM, you can enjoy the following operations. x Environment for using “Picture Motion Browser” x Importing images taken with your camcorder to a computer OS: Microsoft Windows 2000 Professional SP4/Windows XP SP2*/Windows Vista* x Viewing imported images on a computer * 64-bit editions and Starter (Edition) are not supported.
What you can do with Windows computer (Continued) • Depending on your computer, 8 cm media (DVD+R DL, etc.) cannot be used. • If you use a Notebook PC, connect it to the AC Adaptor as the power source. Otherwise, the software will not work properly due to the power saving function of the PC. • You can read images recorded on a “Memory Stick PRO Duo” in a Memory Stick slot of a computer.
One of the following installation screens appears, depending on the computer environment. Check the screen and follow the instructions displayed to install the required software. – Sonic UDF Reader* Software required to recognize a DVD-RW (VR mode) disc – Windows Media Format 9 Series Runtime (Windows 2000 only) Software required to create a DVD – Microsoft DirectX 9.0c* Software required to handle movies * Windows 2000, Windows XP only qa Restart the computer if required to complete the installation.
What you can do with Windows computer (Continued) 6 Disconnect the USB cable from the camcorder and the computer. b Notes • Do not disconnect the USB cable while the ACCESS/access lamp is lit. • Before turning off your camcorder, disconnect the USB cable following the proper procedures described above. • Disconnect the USB cable using the proper procedures described above. Otherwise, files stored on the media may not be updated correctly.
Troubleshooting Troubleshooting If you run into any problems using your camcorder, use the following table to troubleshoot the problem. If the problem persists, disconnect the power source and contact your Sony dealer. • Overall operations/Easy Handycam operation/ Remote Commander ................................... 101 • Batteries/Power sources ............................. 102 • LCD screen/Viewfinder.............................. 103 • Media .........................................................
Troubleshooting (Continued) Even if you press EASY, menu settings do not switch to their defaults automatically. • Following menu settings remain as they were set even during Easy Handycam operation (p. 34). – [MOVIE MEDIA SET] – [PHOTO MEDIA SET]* – [AUDIO MODE]** – [WIDE SELECT] – [SUB-T DATE] – [ INDEX SET] – [ IMAGE SIZE] – [FILE NO.
• Connect the power cord (mains lead) to the wall outlet (wall socket) properly. • The battery charge is completed (p. 21). The CHG (charge) lamp flashes while the battery pack is being charged. • Attach the battery pack to the camcorder correctly (p. 21). If the problem persists, disconnect the AC Adaptor from the wall outlet (wall socket) and contact your Sony dealer. The battery pack may be damaged. The remaining battery time indicator does not indicate the correct time.
Troubleshooting (Continued) The indicators of the disc type and the recording format on the LCD screen are grayed out. • The disc may have been created on another device. You can play back the disc with your camcorder, but you cannot record additional movies on the disc. • You inserted a disc that cannot be used with your camcorder. • Your camcorder could not recognize the disc. You cannot operate functions using the “Memory Stick PRO Duo.
The recording stops. • The temperature of your camcorder is extremely high. Turn off your camcorder and leave it for a while in a cool place. • Moisture condensation has occurred. Turn off your camcorder and leave it about 1 hour (p. 121). There is a time difference between the point where you press START/ STOP and the point that movie recording starts/stops.
Troubleshooting (Continued) [COLOR SLOW SHTR] does not operate correctly. • [COLOR SLOW SHTR] may not operate correctly in total darkness. Use NightShot plus or [S. NIGHTSHOT PLS]. You cannot adjust [LCD BL LEVEL]. • You cannot adjust [LCD BL LEVEL] when: – The LCD panel is closed on your camcorder with the LCD screen facing out. – The power is supplied from the AC Adaptor. Playing back images on your camcorder You cannot find the images to be played back.
The playback image is distorted. • Clean the disc using a soft cloth (p. 118). “ ” is indicated on an image in the DVD menu. • Loading of the data may have failed while finalizing the disc. For the following discs, make the disc capable of additional recording (p. 74), then remake the DVD menu by finalizing the disc again (p. 67). The DVD menu may be displayed correctly. – DVD-RW (VIDEO mode) – DVD+RW Playback freezes for an instant between the scenes.
Troubleshooting (Continued) Movies cannot be divided. • A movie that is too short cannot be divided. • A movie protected on another device cannot be divided. Images cannot be deleted. • You cannot delete following movies (p. 51). – Movies recorded on DVD-R/DVD+R DL – Movies recorded on DVD-RW (VIDEO mode) except the last recorded movie – Movies recorded on DVD+RW except the last recorded movie • In the case of disc, you cannot delete movies during Easy Handycam operation (p. 34).
Your camcorder is not recognized by the computer. • Install “Picture Motion Browser” (p. 98). • Disconnect devices from the USB jack of the computer other than the keyboard, mouse, and your camcorder. • Disconnect the USB cable from the computer and your camcorder, and restart the computer, then connect the computer and your camcorder again in an orderly manner (p. 99). • Make sure the media check tool of the computer activates. For details on the media check tool, see “PMB Guide.
Warning indicators and messages Self-diagnosis display/Warning indicators If indicators appear on the LCD screen or in the viewfinder, check the following. Some symptoms you can fix by yourself. If the problem persists even after you have tried a couple of times, contact your Sony dealer or local authorized Sony service facility. C:04:00 E:20:ss / E:31:ss / E:61:ss / E:62:ss / E:91:ss / E:94:ss • A malfunction that you cannot service has occurred.
E (Battery level warning) Slow flashing • The battery pack is nearly used up. • Depending on the operating, environment, or battery conditions, E may flash, even if there are approximately 20 minutes remaining. (High temperature warning) Slow flashing • The temperature of your camcorder is getting higher. Turn off your camcorder and leave it for a while in a cool place. Fast flashing* • The temperature of your camcorder is extremely high. Turn off your camcorder and leave it for a while in a cool place.
Warning indicators and messages (Continued) Description of warning messages If messages appear on the screen, follow the instructions. x Media Internal memory format error. • The format of the internal memory of your camcorder has been changed from the default format. You may be able to use the internal memory again after formatting it (p. 72). All the data in the internal memory will be deleted. ZRecording on disc disabled. • A malfunction has occurred with the disc and the disc cannot be used.
database file is created. The old recorded images on the “Memory Stick PRO Duo” cannot be played back (Image files are not damaged). If you perform [REPAIR IMG.DB F.] (p. 76) after creating new image database file, playing back the old recorded images may become possible. If it does not work, copy the image to a computer using the supplied software. Inconsistencies found in Image Database File. Movies cannot be recorded or played.
Additional Information Using your camcorder abroad Power supply System You can use your camcorder in any countries/regions using the AC Adaptor supplied with your camcorder within the AC 100 V to 240 V, 50/60 Hz range. Use a commercially available AC plug adaptor [a], if necessary, depending on the design of the wall outlet [b].
Setting to the local time You can easily set the clock to the local time by setting a time difference when using your camcorder abroad. Touch (HOME) t (SETTINGS) t [CLOCK/ LANG] t [AREA SET] and [DST SET] or [SUMMERTIME] (p. 88). World time difference Time-zone differences Area setting Time-zone differences GMT Lisbon, London +11:00 Solomon Is. +01:00 Berlin, Paris +12:00 Fiji, Wellington +02:00 Helsinki, Cairo, Istanbul –12:00 Eniwetok, Kwajalein +03:00 Moscow, Nairobi –11:00 Midway Is.
File/folder structure on the internal memory (DCR-DVD810) and a “Memory Stick PRO Duo” The file/folder structure is shown below. You do not usually need to acknowledge the file/ folder structure, when recording/playing back images on the camcorder. To enjoy still images or movies by connecting to a computer, see “PMB Guide” on the supplied CD-ROM, then use the supplied application.
Maintenance and precautions About the disc See page 13 for the details of discs which you can use with your camcorder. x Recording on the A side Place the disc in your camcorder with the side with the symbol at the center facing outwards until it clicks. symbol Notes on use • Hold the disc by its edge while supporting the center hole lightly. Do not touch the recording side (the opposite of the printed side when using a single-sided disc).
Maintenance and precautions (Continued) Care and storage of the discs • Keep the disc clean, or the image quality of the audio and video output may deteriorate. • Clean the disc with a soft cloth. Wipe the disc from the center out. For dirt, clean the disc with a soft cloth slightly moistened in water, then remove the moisture with a soft, dry cloth. Do not use solvents such as benzine, cleaners intended for vinyl LPs or antistatic spray, as they may cause a malfunction to the disc.
• Do not insert anything other than a “Memory Stick PRO Duo” into the Memory Stick Duo slot. Doing so may cause a malfunction.
Maintenance and precautions (Continued) To charge the battery pack • Be sure to charge the battery pack before you start using your camcorder. • We recommend charging the battery pack in an ambient temperature of between 10 °C to 30 °C (50 °F to 86 °F) until the CHG (charge) lamp turns off. If you charge the battery pack outside of this temperature range, you may not be able to charge it efficiently.
About handling of your camcorder On use and care x When not using your camcorder for a long time • Periodically turn it on and let it run such as by playing back or recording images for about 3 minutes. • Remove a disc from your camcorder. • Use up the battery pack completely before storing it. Moisture condensation If your camcorder is brought directly from a cold place to a warm place, moisture may condense inside your camcorder, on the surface of the disc, or on the pickup lens.
Maintenance and precautions (Continued) x How to prevent moisture condensation When you bring your camcorder from a cold place into a warm place, put your camcorder in a plastic bag and seal it tightly. Remove the bag when the air temperature inside the plastic bag has reached the ambient temperature after about 1 hour. LCD screen • Do not exert excessive pressure on the LCD screen, as it may cause damage. • If your camcorder is used in a cold place, a residual image may appear on the LCD screen.
On the pickup lens • Do not touch the lens inside the disc cover. Keep the disc cover closed except when inserting and removing the disc, to keep dust out. • When your camcorder does not work because the pickup lens is dirty, clean it with a camera blower (optional). Do not touch the pickup lens directly during cleaning, because this may cause the camcorder to malfunction. Pickup lens About care and storage of the lens 4 Press the viewfinder onto the body of the camcorder.
Maintenance and precautions (Continued) On charging the pre-installed rechargeable battery Your camcorder has a pre-installed rechargeable battery to retain the date, time, and other settings even when the POWER switch is set to OFF (CHG). The preinstalled rechargeable battery is always charged while your camcorder is connected to the wall outlet (wall socket) via the AC Adaptor or while the battery pack is attached.
Specifications System Video compression format MPEG2/JPEG (Still images) Audio compression format DCR-DVD610 Dolby Digital 2ch Dolby Digital Stereo Creator DCR-DVD710/DVD810 Dolby Digital 2/5.1ch Dolby Digital 5.1 Creator Video signal NTSC color, EIA standards Internal memory (DCR-DVD810) 8 GB When measuring media capacity, 1 GB equals 1 billion bytes, a portion of which is used for data management.
Specifications (Continued) Minimum illumination DCR-DVD610 6 lx (lux) (AUTO SLW SHUTTR ON, Shutter speed 1/30 second) 0 lx (lux) (during NightShot plus function) DCR-DVD710/DVD810 8 lx (lux) (AUTO SLW SHUTTR ON, Shutter speed 1/30 second) 0 lx (lux) (during NightShot plus function) * “Exif” is a file format for still images, established by the JEITA (Japan Electronics and Information Technology Industries Association).
On trademarks Power requirements • “Handycam” and are registered trademarks of Sony Corporation. • “Memory Stick,” , “Memory Stick Duo,” “ ,” “Memory Stick PRO Duo,” “ ,” “Memory Stick PRO-HG Duo,” “ ,” “Memory Stick Micro,” “MagicGate,” “ ,” “MagicGate Memory Stick” and “MagicGate Memory Stick Duo” are trademarks or registered trademarks of Sony Corporation. • “InfoLITHIUM” is a trademark of Sony Corporation. • DVD-RW, DVD+RW, DVD-R, and DVD+R DL logo are trademarks.
Specifications (Continued) Notes on the License ANY USE OF THIS PRODUCT OTHER THAN CONSUMER PERSONAL USE IN ANY MANNER THAT COMPLIES WITH THE MPEG-2 STANDARD FOR ENCODING VIDEO INFORMATION FOR PACKAGED MEDIA IS EXPRESSLY PROHIBITED WITHOUT A LICENSE UNDER APPLICABLE PATENTS IN THE MPEG-2 PATENT PORTFOLIO, WHICH LICENSE IS AVAILABLE FROM MPEG LA, L.L.C., 250 STEELE STREET, SUITE 300, DENVER, COLORADO 80206. “C Library,” “Expat,” “zlib,” and “libjpeg” software are provided in your camcorder.
Quick Reference Identifying parts and controls The numbers in ( ) are reference pages. A NIGHTSHOT PLUS switch (41) B Memory Stick Duo slot/cover and access lamp (32) The access lamp lights for both the internal memory* and a “Memory Stick PRO Duo.
Identifying parts and controls (Continued) A POWER switch (25) B Viewfinder (27) C CHG (charge) lamp (21) D (Movie)/ (Still) mode lamps (25) E Battery pack (21) F Built-in microphone (40) An Active Interface Shoe* compatible microphone (optional) will take precedence when connected. G Power zoom lever (40, 46) H PHOTO button (34, 39) I DC IN jack (21) J START/STOP button (34, 39) K Tripod receptacle Attach the tripod (optional: the length of the screw must be less than 5.5 mm (7/32 in.
A Active Interface Shoe * The Active Interface Shoe supplies power to optional accessories such as a video light, a flash, or a microphone. The accessory can be turned on or off as you operate the POWER switch on your camcorder. Refer to the operating instructions supplied with your accessory for details. G Infrared port/Remote sensor* Point the Remote Commander* (p. 132) towards the remote sensor to operate your camcorder.
Identifying parts and controls (Continued) Remote Commander (DCR-DVD710/ DVD810) screen. Select a desired button or an item with b / B / v / V, then press ENTER to enter. b Notes • Remove the insulation sheet before using the Remote Commander. Insulation sheet • Point the Remote Commander towards the remote sensor to operate your camcorder (p. 131). • When no commands have been sent from the Remote Commander in a certain period, the orange frame disappears.
Indicators displayed during recording/playback Recording movies A HOME button (18, 78) B Remaining battery (approx.
Indicators displayed during recording/playback (Continued) Indicators when you made changes Indicator Meaning E Warning (110) Following indicators appear during recording/playback to indicate the settings of your camcorder.
Glossary x 5.1ch surround sound x VIDEO mode A system that plays back sound on 6 speakers, 3 at the front (left, right and center) and 2 at the rear (right and left) with an additional low-pass subwoofer counted as a 0.1 channel for frequencies of 120 Hz or lower. One of the recording formats you can select when using a DVD-RW. VIDEO mode provides excellent compatibility with other DVD devices. x Dolby Digital One of the recording formats you can select when using a DVD-RW.
Index Numeric CLOCK/LANG.................... 88 E 12IMAGES...........................85 COLOR SLOW SHTR (Color Slow Shutter) ............... 95, 109 Easy Handycam operation....34 16:9.......................................48 16:9 WIDE ...........................31 4:3...................................31, 48 Computer ............................. 97 Connecting Printer ........................... 64 5.1ch surround recording......40 TV................................. 48 5.1ch surround sound .......
INDEX SET (Face Index set) ..............................................82 NightShot plus...................... 41 Indicators ............................134 Number of still images recordable............................. 83 INDOOR...............................94 NTSC ................................. 114 InfoLITHIUM.....................119 QUICK ON...........................41 QUICK ON STBY ...............89 R Install (software)...................97 O Insulation sheet ...................
Index (Continued) SUNRISE&SUNSET ...........93 S.NIGHTSHOT PLS (Super NightShot plus).............95, 109 T TELE MACRO.............92, 109 Tripod .................................130 TV color system .................114 TV TYPE........................48, 87 TWILIGHT ..........................93 U UNFINALIZE ..............74, 108 USB 2.0 ................................97 USB cable.......................64, 98 Using abroad.......................114 V VBR......................................14 VF B.
Spanish Quick Guide/Guía rápida en español Paso 1: Comprobación de los componentes incluidos Asegúrese de que dispone de los siguientes componentes incluidos con su videocámara. El número entre paréntesis indica el número de componentes incluidos de cada artículo.
Paso 2: Recarga de la batería Interruptor POWER Toma DC IN Batería Indicador CHG (carga) Adaptador de ca Clavija de cc Cable de alimentación Puede recargar la batería “InfoLITHIUM” (serie H) después de colocarla en la videocámara. b Notas • La videocámara funciona sólo con una batería “InfoLITHIUM” (serie H). 1 Deslice el interruptor POWER en el sentido de la flecha hasta la posición OFF (CHG) (ajuste predeterminado). 2 Instale la batería deslizándola en el sentido de la flecha hasta que haga clic.
Paso 2: Recarga de la batería (Continuación) Para extraer la batería 1 Deslice el interruptor POWER hacia la posición OFF (CHG). nuevo DISP/BATT INFO mientras aparece dicha información. Energía restante de la batería (aprox.) 2 Deslice la palanca de liberación BATT (batería) (1) y extraiga la batería (2).
Batería NP-FH100 Tiempo de grabación continua Tiempo de grabación normal (típico)* 625 300 680 325 DCR-DVD710/DVD810 Batería Tiempo de grabación continua 95 Tiempo de grabación normal (típico)* 45 DCR-DVD710/DVD810 Batería Tiempo de grabación continua Tiempo de grabación normal (típico)* NP-FH40 (incluida) 80 95 35 40 NP-FH50 95 40 110 45 NP-FH70 205 90 235 105 NP-FH100 470 210 535 240 110 50 NP-FH50 110 50 130 60 NP-FH70 235 110 280 130 NP-FH100 535 255 b
Paso 2: Recarga de la batería (Continuación) DCR-DVD710/DVD810 Batería Panel de Panel de LCD LCD abierto* cerrado NP-FH40 (incluida) 140 170 NP-FH50 165 195 NP-FH70 350 415 NP-FH100 785 925 Al reproducir un disco – La batería está completamente gastada (sólo para la información sobre la batería).
Paso 3: Conexión de la alimentación y ajuste de la fecha y la hora Ajuste la fecha y la hora cuando utilice la videocámara por primera vez. Si no ajusta la fecha y la hora, aparecerá la pantalla [AJUS.RELOJ] cada vez que encienda la videocámara o cambie la posición del interruptor POWER. Toque el botón que aparece en la pantalla LCD. 3 Seleccione la zona geográfica deseada con [SIGUIENTE]. / y luego toque 4 Ajuste el valor de [HORA 5 Ajuste [A] (año) mediante / .
Paso 3: Conexión de la alimentación y ajuste de la fecha y la hora (continuación) Para el mediodía, ajuste el reloj en 12:00 pm. Paso 4: Realización de ajustes antes de la grabación Apertura de la tapa del objetivo Para apagar la videocámara Deslice el interruptor POWER hacia la posición OFF (CHG). Deslice el interruptor LENS COVER hacia la posición OPEN.
Para desactivar la luz de fondo de la pantalla LCD y conseguir que la batería dure más tiempo (DCR-DVD710/DVD810) Visor Mantenga presionado DISP/BATT INFO durante unos segundos hasta que aparezca . Este ajuste resulta práctico cuando utiliza la videocámara en condiciones de mucho brillo o si desea ahorrar energía de la batería. Este ajuste no afectará a la imagen grabada. Para encender la luz de fondo de la pantalla LCD, mantenga presionado DISP/ BATT INFO durante unos segundos hasta que desaparezca.
Paso 5: Selección de un medio Puede definir en forma separada el medio que usará para películas y el que usará para imágenes fijas. Para películas, puede seleccionar la memoria interna*, un disco o un “Memory Stick PRO Duo”. Para imágenes fijas, puede seleccionar la memoria interna*, o un “Memory Stick PRO Duo”. DCR-DVD610/DVD710 En el ajuste predeterminado, las películas se graban en un disco. Las imágenes fijas se graban sólo en un “Memory Stick PRO Duo”.
Selección de un medio para imágenes fijas (DCR-DVD810) 1 Toque (HOME) t (GESTIONAR SOPORTE) t [AJ.SOPORTE FOTO]. Aparece la pantalla de ajuste de medio para imágenes fijas. b Notas • No es posible seleccionar un disco como medio para imágenes fijas. 3 Toque [SÍ]. 4 Cuando aparezca [Finalizado.], toque . Cambió el medio para imágenes fijas. 1 Deslice el interruptor POWER para encender el indicador del modo ( (Película)/ (Imagen fija)) en que desea comprobar el medio.
Paso 6: Inserción de un disco o un “Memory Stick PRO Duo” Si selecciona [MEMORIA INTERNA] en el “Paso 5”, la operación de este paso es innecesaria (DCR-DVD810). Inserción de un disco 3 Coloque el disco con la cara de grabación hacia la videocámara y presione el centro del disco hasta que haga clic. Si selecciona [DISCO] en el “Paso 5”, se necesita un nuevo DVD-RW, DVD+RW, DVD-R o DVD+R DL de 8 cm b Notas • Antes de utilizarlo, elimine el polvo y las huellas dactilares del disco con un paño suave.
5 Toque la opción que desee en la pantalla. x DVD-RW Seleccione el formato de grabación, . [VIDEO] o [VR], y luego toque x DVD+RW Seleccione la relación de aspecto de la película, [PANORÁM.16:9] o [4:3], . luego toque 6 Toque [SÍ]. toque . Cuando el proceso de formateo finalice, puede comenzar a grabar en disco. z Sugerencias • Si usa un DVD-RW mientras está ajustado el funcionamiento en modo Easy Handycam, el formato de grabación se fija en el modo VIDEO.
Paso 6: Inserción de un disco o un “Memory Stick PRO Duo” (Continuación) Inserción de un “Memory Stick PRO Duo” Esta operación es necesaria sólo si selecciona [MEMORY STICK] en el “Paso 5”. z Sugerencias • Si sólo graba imágenes fijas en el “Memory Stick PRO Duo”, no son necesarias las operaciones posteriores al paso 3. 3 Si selecciona [MEMORY STICK] en el “Paso 5” para la grabación de películas, deslice el interruptor POWER varias veces hasta que se encienda el indicador (Película).
Para extraer el “Memory Stick PRO Duo” Tiempo de grabación de películas en un “Memory Stick PRO Duo” Abra el panel de LCD y la cubierta del Memory Stick Duo. Empuje levemente el “Memory Stick PRO Duo” una vez y luego deslícelo hacia fuera de la ranura. Las cifras de la tabla indican el tiempo de grabación aproximado en minuto del “Memory Stick PRO Duo”. Las cifras en ( ) indican el tiempo de grabación mínimo.
Spanish Quick Guide/Guía rápida en español Grabación Las imágenes se graban en el medio seleccionado en el ajuste de medio. DCR-DVD610/DVD710 En el ajuste predeterminado, las películas se graban en un disco. Las imágenes fijas se graban sólo en un “Memory Stick PRO Duo”. DCR-DVD810 En el ajuste predeterminado, tanto las películas como las imágenes fijas se graban en la memoria interna. PHOTO F Abra la tapa del objetivo.
z Sugerencias • Puede consultar el espacio libre para películas en el medio al tocar SOPORTE) t [INFO SOPORTE]. Películas (HOME) t (GESTIONAR Imágenes fijas 1 Deslice el interruptor POWER A hasta que se encienda el indicador (Película). 2 Presione START/STOP B (o C). 1 Deslice el interruptor POWER A hasta que se encienda el indicador (Imagen fija). 2 Presione PHOTO F ligeramente [ESPERA] t [GRAB.] Para detener la grabación, presione START/STOP de nuevo. Parpadea t Se enciende aparece junto a o .
Reproducción Puede reproducir imágenes grabadas en el medio seleccionado en el ajuste de medio. DCR-DVD610/DVD710 En el ajuste predeterminado, se reproducen las películas de un disco. Las imágenes fijas se graban y se reproducen sólo en un “Memory Stick PRO Duo”. DCR-DVD810 En el ajuste predeterminado, se reproducen las imágenes de la memoria interna.
z Sugerencias • El número de imágenes que aparece en la pantalla VISUAL INDEX se puede cambiar entre 6 y 12 al mover la palanca del zoom motorizado F. Para fijar este número, toque (HOME) D (o E) t (AJUSTES) t [VIEW IMAGES SET]t [DISPLAY ]. 3 Iniciar reproducción. Películas Toque la ficha y la película que desea reproducir. Cuando la reproducción desde la película seleccionada llega a la última película, la pantalla regresa a la pantalla VISUAL INDEX. Vuelve a la pantalla VISUAL INDEX.
Reproducción (Continuación) Ajustar el volumen del sonido de las películas Al reproducir películas, toque con / . (OPTION) t ficha t [VOL.] y luego ajuste el volumen z Sugerencias • Puede cambiar la pantalla a VISUAL INDEX al tocar IMÁGENES) t [VISUAL INDEX].
