Operating Instructions
Table Of Contents
- Table of contents
- Read this first
- Getting Started
- Shooting movies/still images
- Before shooting
- Shooting movies
- Shooting still images
- Adjusting the exposure
- Shooting in the dark – NightShot plus, etc.
- Self-timer recording
- Shooting for the wide-screen TV – 16:9 Wide mode
- Adjusting the white balance manually
- Shooting techniques to match your circumstances – PROGRAM AE
- Focusing manually
- Shooting with special effects
- Checking/Deleting the last scene
- Viewing the recordings
- Finalizing a disc for other players
- Using a disc in VR mode (DVD-RWs only)
- Viewing/duplicating discs/editing the recordings on your computer
- Connecting your camcorder to a TV and a VCR
- Customizing your camcorder
- Troubleshooting
- Additional information
- Parts and controls/Index
35
Shooting movies/still images
VIDEO
FINE
0
-
R
Perform “Getting Started” from step 1 to 5 beforehand (page 15 to 27).
The following operation is common with VIDEO mode and VR mode.
You can record still images and movies on the same disc.
1 Remove the lens cap by pressing both knobs on the sides of the cap.
2 Install the battery pack or connect the AC adaptor (page 15).
3 Open the LCD screen while pressing OPEN.
The image is not displayed in the viewfinder when the LCD screen opens.
4 Set the mode dial to (Still).
5 Turn the power on by pressing the POWER button for a few seconds.
6 Insert a disc (page 26).
This sets your camcorder to standby.
Shooting still images
1
6
7 8
3
4
2
5